Jump to content

Harley-Davidson Topper

From Wikipedia, the free encyclopedia
Harley-Davidson Topper
1960 Harley-Davidson Topper at the Harley-Davidson Museum
ManufacturerHarley-Davidson
Production1960-1965[1]
AssemblyMilwaukee, Wisconsin, USA
Classscooter
Engine10 cu in (164 cc) 2-stroke single-cylinder engine[2] with reed valve[3]
Bore / stroke2.375 in × 2.281 in (60.3 mm × 57.9 mm)[1]
Compression ratio
Top speed46 mph (74 km/h)[5]
Power9 hp (6.7 kW)[6]
Transmissioncontinuously variable transmission, between 18:1 and 6:1[3]
Suspension
  • Front: leading link
  • Rear: swingarm, two extension springs
[3]
BrakesFront and rear: 5 in internal expanding drum[3]
Tires4.00 x 12[2][5]
Wheelbase51.5 in (1,308 mm)[1][2]
DimensionsL: 75 in (1,905 mm)[2]
W: 24 in (610 mm)[2]
H: 37 in (940 mm)[2]
Seat height30 in (762 mm)[2]
Fuel capacity1.7 US gal (6.4 L)[2]

The Harley-Davidson Topper was the only motor scooter that the Harley-Davidson Motor Company ever produced.[7]

Design and specifications

[edit]

The Topper had a 165 cc (10.1 cu in) single-cylinder two-stroke engine mounted horizontally between the floorboards.[8] The engine required a premixed gasoline/oil mixture. The starter was of the rope-recoil type similar to lawn mowers[1][8][9] or the Lambretta E model.[10] Unlike most scooters with enclosed engines, the Topper's engine did not have a cooling fan.[2][5][6] It was expected that the low, horizontally mounted engine would be cooled by air passing under the scooter,[2] but some Toppers developed overheating problems.[5] The engine used a reed valve in its induction system.[3]

The engine powered a continuously variable transmission[2][9] called "Scootaway Drive"[3][9] that included a safety device that did not allow the scooter to move from rest at engine speeds higher than 1800 rpm.[8] Final drive was by an exposed roller chain.[3][8]

The Topper had 5 inch internal expanding drum brakes on both wheels.[3] The front brake was controlled by a hand lever[2][3] on the left handlebar[1] with a parking brake lock;[1][3] the rear brake was controlled by a pedal.[2][3]

The front body, front fender and floorboards of the Topper were made of stamped steel, and the engine cover and body were made of molded fiberglass.[11] Storage space was provided under the seat; the manufacturer suggested storing extra containers of two-stroke oil there.[1]

Development

[edit]

The main complaint from Topper owners was with the "Scootaway Drive" continuously variable transmission. Road grime would get into the transmission and cause the belt to slip.[1] A new transmission, with the primary drive sealed in an oil bath, was introduced for 1961.[4]

The Topper H was introduced in 1961 (sold through 1965) with a new alloy cylinder head that increased the compression ratio to 8.0:1, a reusable foam air filter, and revisions to the cylinder ports and air intake tube.[4]

A detuned version of the Topper was also available, with the power restricted to 5 hp (3.7 kW).[12] This was advertised as the "Topper U".[13] The detuned Topper was made to comply with laws in some states in the United States that allowed motorcycles with rated engine power below a stated maximum to be operated without a license[1] or to be operated on a special license by riders at a younger age than would be allowed a regular motorcycle license.[12]

A Topper was used by the Milwaukee Brewers as a bullpen car from 1959 through 1995.[14]

Performance

[edit]

In 1959 a Topper was ridden from Bakersfield, California to Death Valley and back without repair or adjustments requiring tools. The route went through Trona, to Stovepipe Wells, then to Badwater Basin, then to Whitney Portal, 7,851 feet (2,393 m) above sea level on the side of Mount Whitney. It then returned to Bakersfield.[15]

See also

[edit]

Notes

[edit]
  1. ^ a b c d e f g h i j Wright 1987, p. 84.
  2. ^ a b c d e f g h i j k l m n Arctander 1959, p. 65.
  3. ^ a b c d e f g h i j k Ismon 1959a, p. 14.
  4. ^ a b c Ismon 1961, p. 18.
  5. ^ a b c d Dan 2007, p. 138.
  6. ^ a b Wood 2004, p. 67.
  7. ^ HD 2015.
  8. ^ a b c d Arctander 1959, p. 64.
  9. ^ a b c AECG 2007.
  10. ^ Lambretta Model E - Lambretta Club of Great Britain
  11. ^ Ismon 1959a, p. 13.
  12. ^ a b Ismon 1962, p. 13.
  13. ^ Hicks 1961, p. 229.
  14. ^ "Our Back Pages: County Stadium's pioneering bullpen cart".
  15. ^ Ismon 1959b, p. 35.

References

[edit]
Print
Online
  • "Harley-Davidson Timeline 1960s". Harley-Davidson Timeline. Harley-Davidson. 2015. Archived from the original on 2006-10-29. Retrieved 2015-04-19. The Harley-Davidson Topper motor scooter is introduced and is the only scooter platform the Motor Company ever produced.
  • The Auto Editors of Consumer Guide (2007-09-18). "1963 Harley-Davidson Topper". How Stuff Works. Archived from the original on 2009-12-03. Retrieved 2015-04-19. Its 165-cc two-stroke single was started with a recoil starter, like a lawn mower, and drove through a variable-ratio automatic transmission called Scootaway Drive. {{cite web}}: |author= has generic name (help)
  • "Lambretta Model E". Lambretta Club of Great Britain. Archived from the original on 2010-06-23. Retrieved 2012-12-24. To start the scooter a pull cord (like that found on chain saws) was mounted in front of the magneto, the ignition on the E could be advanced and retarded for ease of staring (sic) on the pull cord, this ensured the machine did not 'kick back' injuring the person while starting it.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Harley-Davidson_Topper&oldid=1223908865"