Jump to content

Grande Ronde River Bridge

Coordinates: 46°02′30″N 117°15′09″W / 46.04159°N 117.25251°W / 46.04159; -117.25251
From Wikipedia, the free encyclopedia

Grande Ronde River Bridge
Grande Ronde River Bridge is located in Washington (state)
Grande Ronde River Bridge
Grande Ronde River Bridge is located in the United States
Grande Ronde River Bridge
LocationOn State Route 129, about 23 miles (37 km) southwest of Asotin
Nearest cityAsotin, Washington
Coordinates46°02′30″N 117°15′09″W / 46.04159°N 117.25251°W / 46.04159; -117.25251
Arealess than one acre
Built1941
Built byWashington State Highway Department; Henry Hagman; Clinton Bridge Company
EngineerR. W. Finke
Architectural styleRiveted Steel Girder
MPSBridges of Washington State MPS
NRHP reference No.95000262[1]
Added to NRHPMarch 28, 1995

The Grande Ronde River Bridge, near Asotin in Asotin County in southeast Washington, is a riveted steel girder bridge which was built in 1941. It is notable as the first, or one of the first, steel girder bridges in the Washington State highway system, and was a prototype for later ones.[2] It was listed on the National Register of Historic Places in 1995.[1]

It brings Washington State Route 129 over the Grande Ronde River, about 13 miles (21 km) south of Anatone, Washington and 23 miles (37 km) southwest of Asotin. It is 283 feet (86 m) long in total, with a center suspended span 55 feet (17 m) long between two 30 feet (9.1 m) cantilever spans. On each side is a 24 feet (7.3 m) reinforced concrete T-beam approach span and a steel anchor arm span 60 feet (18 m) long.[2]

It was built for the Washington State Highway Department by contractor Henry Hagman using steel fabricated by the Clinton Bridge Company of Clinton, Iowa. R. W. Finke was the bridge engineer.[2]

Its NRHP nomination states:

Although the bridge is lacking overt artistic features, its design is particularly appropriate to the unique character of the location. The simple horizontal lines of the bridge complement the basalt outcrops rising abruptly in layered formations from the valley floor. The bridge's configuration and type of construction appear to have been an excellent engineering solution for this particular river crossing.[2]

References

[edit]
  1. ^ a b "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
  2. ^ a b c d Robert H. Krier, J. Byron Barber, Robin Bruce, and Craig Holstine (December 4, 1991). "National Register of Historic Places Inventory/Nomination: Grande Ronde River Bridge / WSDOT 129/2". National Park Service. Retrieved June 12, 2017.{{cite web}}: CS1 maint: multiple names: authors list (link) With two photos from 1992.