Jump to content

Goodyear RS-1

From Wikipedia, the free encyclopedia
RS-1
The Goodyear RS-1 semi-rigid airship in flight, 1927
Role Semi-rigid Airship
Manufacturer Goodyear Tire and Rubber Company
First flight 8 January 1926
Retired November 1928
Status Scrapped in 1930
Primary user United States Army Air Service
Number built 1

The Goodyear RS-1 was the first semi-rigid airship built in the United States. The dirigible was designed by chief aeronautical engineer and inventor, Herman Theodore Kraft of the Goodyear Tire and Rubber Company for the United States Army Air Service in the late 1920s. Goodyear built only one airship of this type.

Design and development

[edit]

The construction contract for the RS-1 was awarded to the Goodyear-Zeppelin Corporation by the US Army at a cost of $475,000. Main components of the RS-1 were assembled in 1924 at the Goodyear hangar at Wingfoot Lake in Suffield, Ohio. The airship was designed by Goodyear engineer and inventor, Herman Theodore Kraft who consulted with noted Italian semi-rigid airship designer, Colonel Umberto Nobile. Components for the dirigible were shipped to Scott Field, Illinois for assembly in the base's 810 foot airship hangar in early 1925.[1] The first flight of the RS-1 was postponed due to an error made by a rigger during erection and eventually took place on January 8, 1926, lasting just over an hour with a crew of eight men. The dirigible was 282 feet (85.9 m) long and had a gas volume of 720,000 cu ft (20,388,130 L) and was initially powered by four 300 horsepower, 12 cylinder Liberty engines. In 1927, the Liberty engines were replaced with lighter weight 500 horsepower, 2A-1500 Packard engines. [1] A 35 ft (10.7 m) enclosed control car was suspended from the keel at the nose. The control car included a radio compartment, sleeping accommodations and a small galley. Equipment included a bombing cockpit and the ability to carry 3,500 lb (1,588 kg) of bombs, as well as machine gun mounts on each side at the forward end of the car. The primary purpose of the RS-1 was for the Army to study and evaluate the performance and capabilities of the semi-rigid type of airship. Following its maiden flight in January 1926, The RS-1 made several more flights until November 1928, when it was ordered grounded after an inspection revealed deterioration of the envelope. Due to the poor economic conditions on the cusp of the Great Depression, a replacement envelope was ultimately never ordered and the RS-1 never flew again. The airship remained in its hanger at Scott Field for over a year and was eventually dismantled. Components of the airship, including the control car, keel, engine gondolas, control surfaces, cables and various parts were sold to a scrap dealer for $900.[1]

However, when Air Corps personnel inspected the Goodyear plant in early May 1930 they found a complete spare envelope, together with large quantities of sheet and tubular duralumin, forms, jigs, patterns and dies left over from the airship's original purchase contract, No.562. The latter had provided for the manufacturer to store these materials for three years after the experimental airship's delivery. It was recommended that most of this material be returned to Wright Field, the envelope, and cardboard ballonet and cantonary templates being recommended for destruction.[2]

Operators

[edit]
 United States

Specifications

[edit]

Data from [1]Flight 25 March 1926

General characteristics

  • Length: 282 ft 0 in (85.95 m)
  • Diameter: 70 ft 6 in (21.49 m)
  • Volume: 720,000 cu ft (20,000 m3)
  • Powerplant: 4 × Liberty L-12 , 400 hp (300 kW) each

Performance

  • Maximum speed: 70 mph (110 km/h, 61 kn)
  • Cruise speed: 55 mph (89 km/h, 48 kn)

See also

[edit]

References

[edit]
  1. ^ a b c d "he Goodyear Semi-Rigid Airship RS-1". Flight. 25 March 1926. Retrieved 20 July 2013.
  2. ^ Captain Edgar P. Sorensen, 8 April 1930, Report on Board appointented by Par. 4, S.O. 70, Wright Field, Dayton, Ohio, Dated April 7, 1930, "Surplus Material, 5.12 Airship Type RS-1," Aircraft Lab, Special Projects Branch, R&D Project Files, RD 707, Box 5884, P 27, RG 342, National Archives (College Park), NAID: 3108814.