Ghana Railways 1851 class
Ghana Railways 1851 class | |||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The Ghana Railways 1851 class were a class of diesel-electric locomotives built by English Electric-AEI Traction for the Ghana Railways in 1969/70.
Description
[edit]The 1851 class were a dual cab hood type general purpose locomotive. Engine, electrical and control equipment was essentially as fitted to the British Rail Class 37 as well as a number of other export locomotives.[1][2]
The main frame consisted of two fabricated box section longitudinal members with fabricated box section cross members. These box sections were sealed to form the fuel tank in the centre of the locomotive.
The bogies, designed by English Electric, were cast steel with axles fully compensated with underslung beams acting on long travel coil springs. Side bearers are totally enclosed with oil lubrication. Lateral spring controlled intercouplers link the bogies, reducing track stresses and flange wear in curves. Traction motors are mounted on the axle towards the inner end of the bogies to reduce weight transfer under load.
History
[edit]By 1999 only two remained in service.[3] In 2003 just one, 1864, remained in storage at New Takoradi, but had been scrapped by 2007.[4]
References
[edit]- ^ Ghana commissions high-power EE-AEI diesels Railway Gazette 6 February 1970 page 321
- ^ High-Power English Electric Dieseln Locomotives for Gahana Modern Railways issue 259 April 1970 pages 166/167
- ^ Design improvements help to keep diesel locos on the road Railway Gazette International April 1999
- ^ "The Railways of Ghana". International Steam. April 2007.