Draft:Spax (screw)
| Submission declined on 13 June 2024 by Mdann52 (talk). This submission does not appear to be written in the formal tone expected of an encyclopedia article. Entries should be written from a neutral point of view, and should refer to a range of independent, reliable, published sources. Please rewrite your submission in a more encyclopedic format. Please make sure to avoid peacock terms that promote the subject.
Where to get help
How to improve a draft
You can also browse Wikipedia:Featured articles and Wikipedia:Good articles to find examples of Wikipedia's best writing on topics similar to your proposed article. Improving your odds of a speedy review To improve your odds of a faster review, tag your draft with relevant WikiProject tags using the button below. This will let reviewers know a new draft has been submitted in their area of interest. For instance, if you wrote about a female astronomer, you would want to add the Biography, Astronomy, and Women scientists tags. Editor resources
|  |
| Submission declined on 25 March 2024 by MicrobiologyMarcus (talk). This submission appears to read more like an advertisement than an entry in an encyclopedia. Encyclopedia articles need to be written from a neutral point of view, and should refer to a range of independent, reliable, published sources, not just to materials produced by the creator of the subject being discussed. This is important so that the article can meet Wikipedia's verifiability policy and the notability of the subject can be established. If you still feel that this subject is worthy of inclusion in Wikipedia, please rewrite your submission to comply with these policies. Declined by MicrobiologyMarcus 7 months ago. | |
Spax (stylized SPAX) is a registered trademark that was introduced in 1967 by the German screw manufacturer Altenloh, Brinck & Co (ABC) for a new type of self-tapping multi-material screw. The name Spax is an acronym for particle board (German: Spanplatte) screw with cross recess (×). Its geometry was an innovation for timber construction, as the particle board materials increasingly used in furniture and drywall construction since the 1950s cannot be securely installed with conventional wood screws, as these damage the panel structure when screwed in.[1]
Design
[edit]
Screws of this type differ from classic wood screws (for example, wood screws with hexagon or with slot) by a different ratio between outer and core diameter, that is, the core diameter is smaller here in proportion. This reduces the screw-in resistance on the one hand and increases the thread overlap from material to screw on the other. The shear resistance of the screwed material associated with this overlap increases the achievable pull-out strength. The threads are much sharper than those of other wood screws. In addition, the core is cylindrical, whereas in classic wood screws it is tapered.[1]
A special feature of Spax screws is the corrugated thread in the first turns of the point, introduced in 1989. This reams the screw-in material and allows the subsequent thread to follow with less friction.[2] The risk of the screw loosening under dynamic load is thus reduced. The corrugated thread and the position of the square thread tip at a special angle to the thread pitch contribute to the fact that the torque to be applied when screwing in is lower. Only a little material is displaced, which minimizes the risk of the workpiece tearing or splitting at the screw-in point.[3]
Variants
[edit]Over time, Spax screws were developed not only for chipboard, but also for other materials, such as softwood, hardwood, plastic, plasterboard and sheet metal, and equipped with different screw heads depending on the application.[2][4] The drive type was initially Phillips, later Pozidriv. In 2005, the company's own T-Star plus hexalobular socket screw drive was introduced, which has an additional recess in the screw head and a corresponding stubby tang on the bit. The Torx ttap power drive features an almost identical design.
See also
[edit]References
[edit]- ^ a b Sanni-Marie Bernard (22 March 2021). Sie drehen nicht durch. [They don't overrun]. Frankfurter Allgemeine Zeitung/Jugend und Wirtschaft (in German). Retrieved 28 January 2024.
- ^ a b Steve Ettlinger, Phil Schmidt (2017). The All New Illustrated Guide to Everything Sold in Hardware Stores. Cool Springs Press, Beverly, MA. ISBN 978-1591866862, p. 21.
- ^ Maciej Sydor (2016). Innowacje w zakresie łączników gwintowych do tworzyw drzewnych. [Innovations in the field of screw connections for wood-based materials] (in Polish). In: Fastener: rynek elementów złącznych (Fastener: Market for fasteners), vol. 1. ISSN 2449-6057 pp. 35–38, here pp. 36–37.
- ^ ETA-Danmark A/S, ed. (2017). European Technical Assessment no. ETA-12/0114, issued on 2017-10-12. Archived from the original on 28 January 2024. Retrieved 28 January 2024. pp. 3, 9–11.
Further reading
[edit]- ETA-Danmark A/S, ed. (2017). European Technical Assessment no. ETA-12/0114, issued on 2017-10-12.