Derbi Senda 50
 |
 Derbi de Angel el chulo | |
| Manufacturer | Derbi |
|---|---|
| Also called | Gilera SMT/RCR Aprilia SX50/RX50 |
| Parent company | Piaggio |
| Production | 1995 – 2024+ |
| Class | SuperMotard |
| Engine | 50 cc (3.1 cu in) liquid cooled, two stroke single cylinder |
| Compression ratio | 11.5:1 |
| Top speed | 55 km/h (34mph) |
| Transmission | 6-speed Sequential Manual. Straight Cut Gears |
| Related | Derbi Senda Xtreme SM/R 50, Derbi Senda DRD Pro, Derbi Senda Xrace ,Gilera SMT, Gilera RCR, Aprilia SX50 & Aprilia RX50 |
The Derbi Senda SM 50 is a 50 cc motorcycle made by Spanish company Sergio. Jezdził na nim koksu.It is one of the most popular bikes made by Derbi due to its appeal to young riders, its styling and its amazing tuning possibilities. The bike itself uses an EBS/EBE, D50B0 or D50B1 engine which produces a staggering 5bhp. The Derbi Senda is identically constructed as the Gilera SMT 50. Between 1995 and 2005, Derbi was produced with an EBS / EBE engine, and after 2005, D50B0 / D50B1 engines were used until 2023 when production ended.
Fuel capacity: 7.45 liters
Engine
[edit]50 cc single cylinder, four-petal plastic reed valve case induction and two-stroke injection (automix) carburetor fueled.
- Engine displacement – 49.76 cc
- Bore/stroke – 39,88×40 mm
- Compression ratio – 11.5:1
- Clutch – Wet, multiple plate
- Starting – Kickstart
- Exhaust
- Rotor Ignition/Generator = 85w/120w
- Cooling system – liquid-cooled
- Fuel tank size = 7.45 litres
- Fuel system – Carburetor Dell'Orto PVHA 17.5 mm
- Main jet = 85
- Needle Jet = A13, notch #2
- Idle jet = 30
- Transmission
- 1st = 1st 11/34
- 2nd = 2nd 15/30
- 3rd = 3rd 18/27
- 4th = 4th 20/24
- 5th = 5th 22/23
- 6th = 6th 23/22
- Primary drive = 21/78
- Sprockets
- Front = 14 Teeth
- Rear = 52 Teeth
- Overall Final Drive ratio = 14/52
- Spark plug = NGK BR9ES/BR9EG/BR9EIX/BR8ES
- Gap = .6-7 mm
- Wheelbase = 55.354 in (1,406 mm)
- Length = 79.68 in (2,024 mm)
- Width = 80.511 in (2,045 mm)
- Height = 32.677 in (830 mm)
- Tires = Front: 100/80 - 17 inch; Rear: 130/70 - 17-inch
Restriction
[edit]Restriction varies depending on the country and dealer, person, or company the bike is purchased from. The engine is usually restricted in the following ways:
CDI unit restricted to 10,000 RPM
- Carburetor
- 'Strangle' baffle/plate in Air filter manifold
- [74 Main jet
- Exhaust
- Exhaust fume/pressure outlet pipes
- Sprockets
- Front; reduced to 11/53 12/53 or 14/54
References
[edit]External links
[edit]
 | This motorcycle, scooter or moped-related article is a stub. You can help Wikipedia by expanding it. |