DataVault
The DataVault was Thinking Machines' mass storage system, storing 5 GB of data, expandable to 10 GB with transfer rates of 40 MB/s. Eight DataVaults could be operated in parallel for a combined data transfer rate of 320 MB/s for up to 80 GB of data.[1]
Each DataVault unit stored its data in an array of 39 individual disk drives with data spread across the drives. Each 64-bit data chunk received from the I/O bus was split into two 32-bit words. After verifying parity, the DataVault controller added 7 bits of Error Correcting Code (ECC) and stored the resulting 39 bits on 39 individual drives. Subsequent failure of any one of the 39 drives would not impair reading of the data, since the ECC code allows any single-bit error to be detected and corrected.[1]
Although operation is possible with a single failed drive, three spare drives were available to replace failed units until they are repaired. The ECC codes permit 100% recovery of the data on any one failed disk, allowing a new copy of this data to be reconstructed and written onto the replacement disk. Once this recovery is complete, the data base is considered to be healed.[1]
In today's terminology this would be labeled a RAID-2 subsystem.[2] However, these units shipped before the label RAID was formed.
The DataVault was an example of unusual industrial design. Instead of the usual rectilinear box, the cabinet had a gentle curve that made it look like an information desk or a bartender's station.[2]
References
[edit]- ^ a b c "Connection Machine® Model CM-2 Technical Summary, Chapter 7". Thinking Machines Corporation. April 1987. pp. 28–30. Retrieved January 16, 2015.
- ^ a b Padua, David, ed. (2011). "Connection Machine". Encyclopedia of Parallel Computing. Springer Science & Business Media. p. 393. ISBN 9780387097657. Retrieved 16 January 2015.
External links
[edit]- US patent 4899342, "Method and apparatus for operating multi-unit array of memories", issued 1990-02-06, assigned to Thinking Machines Corporation