Jump to content

Cottonwood Limestone

Add links
From Wikipedia, the free encyclopedia
Cottonwood Limestone
Stratigraphic range: Asselian (Gearyan stage)[1]
Well-exposed natural outcrop of the Cottonwood Limestone alongside the Konza Prairie Nature Trail
TypeFormation Member
Unit ofBeattie Limestone
Sub-unitsTop Ledge, Bottom Ledge
UnderliesFlorena Shale member of the Beattie Limestone formation
OverliesEskridge Shale
Thickness3–7 ft (0.91–2.13 m)
often ~6 ft (1.8 m)
Lithology
PrimaryLimestone
OtherCalcareous shale and siliceous to quartz[clarification needed] nodules or infills of burrows
Location
RegionMid-continental
Country United States
ExtentOutcrops from southeast Nebraska to northeast-central Oklahoma[2]
Type section
Named forCottonwood Falls, Kansas
Named byProsser, C. S.
Year defined1894-5[3][4]

Cottonwood Limestone, or simply the Cottonwood,[5] is a stratigraphic unit and a historic stone resource in east-central Kansas, northeast-central Oklahoma, and southeastern Nebraska in the Midwestern United States.[2] It is the lowest member of the Beattie Limestone formation and commonly outcrops within the deep valleys and on top of the scenic residual ridges of the Flint Hills.

This important building stone, quarried in the Cottonwood River valley, had been used under the names "Cottonwood stone" or "Cottonwood Falls limestone" many years before the name Cottonwood Limestone appeared in scientific publications late in the 19th century. Similarly, "Manhattan stone" was the commercial name used for the same limestone when quarried in the vicinity of Manhattan, Kansas.[4] It was also called "Alma Limestone" when first quarried at Alma, Kansas.[6][7]

The Cottonwood Limestone is one of the most persistent and easily recognizable horizons in Kansas.[6][8] This limestone is usually light gray or buff in color, massively bedded, and has an average thickness of about six feet. The upper part of the member in particular is recognizable for being almost entirely made up of the small wheat-grain shaped foraminifera Fusulinida, with few other animal remains. The line of outcrop of the Cottonwood is generally marked by a line of massive rectangular blocks of light gray or bleached, bone-colored limestone, often supporting a line of shrubs. Because of its resistance to weathering, it often forms a prominent escarpment. The Cottonwood Limestone is noteworthy for the persistence of this lithologic character across its range.

Resources

[edit]
The Chase County Courthouse located in Cottonwood Falls, Kansas, is an example of the many landmark buildings within the Flint Hills that are constructed of Cottonwood Limestone.[9]

Aside from shaping the landscapes of the communities within the Flint Hills, this limestone is most notable for its influence on the building architectures of the communities in its region. Near the surface, Cottonwood Limestone is a useful aquifer, while deeper subsurface Cottonwood Limestone is associated with oil and gas producing formations.

Construction stone

[edit]
Beecher Bible and Rifle Church, completed in 1862 shortly after the founding of Wabaunsee, Kansas, is an early building constructed of Cottonwood Limestone.

A regionally famous construction material, Cottonwood Limestone is yellowish, buff, to nearly white in color, even-textured, durable, and very suitable for cutting into dimensional stone for masonry. Moreover, its beds of usable stone are particularly massive for the region; blocks of stone three or more feet thick and several feet in length and width can be taken from a ledge.[9] While many other limestone formations are found in the region and have been widely used in local construction, most (excepting most notably the Fort Riley Limestone[10]) weather poorly, lie with much thinner parting beds, or are generally much higher in the typical Permian silica or flint content and so are much more difficult to cut or sculpt.[5] As such, the lithologic characteristics of Cottonwood Limestone has made it one of the best building stones in the state and many past quarries, large and small, may be found on nearly every hill capped by this resource.[4]

Large, cut blocks of Cottonwood Limestone were famously used in historic, monumental buildings in the region, including churches, courthouses, and educational buildings; while rough stones of other limestones are more common in older, smaller homes and buildings. Its use in a building within its region can often be recognized by the use of large cut blocks, near-white or buff color, and showing abundant fossils or molds of “wheat-grain” shaped fusulinids coupled with general absence of spalling, splotchy black coloring from mold that find portions of the stone particularly favorable, and sculptured or protruding rough faces. Especially in older buildings close to a source, Cottonwood Limestone is sometimes paired with the Neva Limestone that is commonly exposed only 35 feet lower in the hills. In this combination, the softer, massive Cottonwood is used for carved trim while the Neva is used, cut or rough, for the general fill and facing,[11] the latter showing a whiter face with smoother glass-like fracture in contrast to the more buff-colored Cottonwood Limestone showing a rougher earthy fracture.

The Cottonwood is the main facing material for the campus buildings of Kansas State University.[4] The Topeka Performing Arts Center[12] as well as much of the Kansas State Capitol[9] and the Great Overland Station[13] in Topeka, Kansas are constructed with Cottonwood Limestone. The iconic Campanile in Lawrence, Kansas, is also built from the once-named “Manhattan stone”.[14] Cottonwood Limestone continues to be popular in constructions,[15] and was recently (2014) used to construct the West Side Stadium Center of the Bill Snyder Family Football Stadium.[16]

Cottonwood Limestone Constructions

Sculpture

[edit]

The massive, fine-grained, bright-white character of this limestone makes it a practical stone for large sculptures:

Aquifer

[edit]
Highlighted here with red lines, the boulders and moisture-seeking shrubs make the Cottonwood Limestone easy to identify and trace along the valleys within the Konza Prairie.

The Cottonwood is a reliable surface limestone aquifer in the region. The brush line seen on many hillsides at the base of this member indicates the moisture it provides. Many springs issue from beneath the massive ledge, especially the west-facing exposures—many of which serve as a source of water for livestock.[11][21] In many places, springs or shallow wells from the Cottonwood provide large supplies of water for domestic home and farm use. This is especially true along westward-facing hillsides, as strata generally dip to the northwest.[4]

Natural gas

[edit]

Natural gas has been produced in the Cottonwood Limestone in southwestern Kansas and northwestern Oklahoma. The member made an impact on gas production in the region in the 1960s and 1970s, particularly in the discovery of additional reserves in previously established and even abandoned fields.[22][23][24]

Distribution

[edit]

As the prominent member of the Beattie Limestone formation, Cottonwood Limestone can be traced on the outcrop from Nemaha County, Nebraska, southward to Osage County, Oklahoma, and followed in the subsurface westward to the vicinity of the Colorado-Kansas line as well as into northwestern Oklahoma.[2][25]

The surface outcropping of the Cottonwood Limestone is easily traced in the Flint Hills south of the Kansas River and east of Manhattan, Kansas. In Manhattan, it forms the scenic ridges surrounding the old downtown in the southeast of the city. From there, the line of outcrop is a tortuous one extending several miles north and west along the Kansas and Big Blue rivers and their tributaries.[4]

This limestone forms extensive outcrops in the Cottonwood River valley that shares its name; outcrops can be followed several miles up every tributary valley around Cottonwood Falls.[6]

Lithologic character and thickness

[edit]
A recent (2006) trench-sawn, 6 foot thick exposure of Cottonwood Limestone, K-18 highway in west Manhattan, Kansas, showing the yellowish-gray or buff of fresh fractures. Just visible is the subtle variations in color, texture, and siliceous nodules between the upper and lower ledges
6 foot thick Cottonwood Limestone near the entrance to Tuttle Creek Cove campground, undercut by wave actions, fractured and exposed since the construction of the Tuttle Creek Lake. Note the visible line of parting between the top and bottom "ledges", and the subtle change in tone and texture.
Cottonwood Limestone seen less than a mile east of Tuttle Creek Lake dam on K-113; showing the white to gray weathering and a history of subterranean dissolution along joints, highlighting the more resistant siliceous nodules.

The Cottonwood Limestone is a marine limestone and calcareous shale, laterally persistent, bench-forming, and notably and consistently showing abundant fossils. An outstanding example of uniformity of thickness over considerable areas, the outcrop of the Cottonwood Limestone over a distance of 150 miles from Nebraska to central Kansas is nowhere less than 5.5 nor more than 6.5 feet.[2] The notable consistency of these characteristics within its range serves to make it a distinctive marker bed. Even so, there are some changes in lithologic character that can be seen from north to south.

In the central and north range, the limestone is recognized to have distinct the upper and lower beds, long known as Top Ledge and Bottom Ledge,[26] which commonly part when weathered. This boundary between the upper and lower Cottonwood is evidenced by a sharp textural contrast, porosity difference, and changes in the opaque mineral content.[5] In this range, the whole member is fine-grained limestone,[27] but the Top Ledge has a yellower tint or a creamy gray with open grain while the Bottom Ledge is whiter with tight grain.[28][29] With respect to fossil content, the upper weathering bed is characterized by the abundant Fusulinid assemblage, while the lower bed is composed of minute particles of various fragmented fossils, especially Osagia, echinoderms, and bryozoans.[27]

In northern east-central Kansas, Cottonwood Limestone forms particularly prominent outcroppings in the Flint Hills, especially in the Cottonwood River valley in Chase County, Neosho River valley in Morris County, and the Kansas River and Big Blue River valleys of Riley County. There, it often forms a very conspicuous hillside bench characterized by massive light-gray rounded limestone blocks. The presence of the Cottonwood Limestone in a hillside here is often marked by a persistent line of shrubs that can be seen for many miles. Wherever seen in these and nearby valleys, the Cottonwood Limestone member is almost uniformly six feet thick. It is everywhere massive and commonly seems to consist of only one or two beds. The limestone on a fresh fracture is yellowish gray to buff in color, weathering to light gray.[6] Fusulinids are common, especially in the upper part, and siliceous nodules project from weathered surfaces. Close observation removes any likelihood of confusing the Cottonwood Limestone with any other layer in this part of Kansas; its distinguishing characters are the massive ledge of uniform thickness, the silicified nodules, and the abundance of fusulinids, chiefly in the resistant upper part. The Cottonwood is not a flinty limestone such as those seen higher on the surrounding hilltops; however, nodules, concretions, and trace fossils (filled-in burrows) of partly silicified material that weather more slowly than the rest of the member can give the limestone an appearance of containing flint.[4]

While the abundance of fusulinids remains a characteristic of the top of the Cottonwood through to Osage County, Oklahoma,[30] south of Chase County, Kansas the member has lost its massive limestone characteristic and does not form the conspicuous outcrops seen farther north.[31] In Greenwood County, Kansas, the unit appears as light-gray limestone crowded with horizontal thin leaves of platy algae, attaining a maximum observed thickness of 8 feet.[30] The Cottonwood in southern Kansas and northern Oklahoma is an interbedded limestone and calcareous shale with a very diverse, abundant, and well-preserved fossil fauna, especially brachiopods, mollusks, and ammodiscid foraminifera (shelly facies). At the southern limit of its outcrop the Cottonwood Limestone is a medium crystalline limestone with thin, shelly layers. Mollusks, Osagia, and quartz silt are common (silty Osagia facies).[27]

A Range of Siliceous Nodules in the Cottonwood Limestone's Top Ledge
  • A protruding siliceous nodule, showing typical abundance of fusulinids.
    A protruding siliceous nodule, showing typical abundance of fusulinids.
  • A longitudinal-section of siliceous nodule seen in split face blocks.
    A longitudinal-section of siliceous nodule seen in split face blocks.
  • A cross-section of siliceous nodule, resembling the flint found in higher limestones.
    A cross-section of siliceous nodule, resembling the flint found in higher limestones.
  • A quartz nodule.
    A quartz nodule.

Paleoenvironment

[edit]

Variations in the characteristic content and texture (facies) of the limestone reflect lateral changes in the environment from north to south.[5][27]

  • The northern and central bioclastic and fusuline facies of the Cottonwood were deposited in shallow, well-lit, moderately turbulent waters having only very small amounts of material washed in from land. Water circulation was variably restricted. Large amounts of sand-sized to granule-sized fusulinids, identified as Schwagerina are preserved, especially in the upper bed; Schubertella fusulinids are more common in the lower bed. Few animal fossils are present in the upper bed but somewhat more frequent in the lower bead, usually fragments or debris, including echinoderms, bryozoans, trilobites, ostracods, crinoids and occasional gastropods.
  • Separating the central and the southern provinces was a broad shoal where the platy algal facies was deposited; here waters were moderately turbulent, well-lit, shallow, and somewhat restricted in circulation.
  • The southern shelly ranges were deposited in a less turbulent and deeper-water environment, having good circulation and relatively large amounts of land-sourced material entering from the south supporting mollusks and sessile, filter-feeding brachiopods. The Osagia, an algal-foraminiferal intergrowth, and other encrusting algae beds in Oklahoma was formed in a shallower, more turbulent, nearer-shore environment marginal to the shelly facies.

Access and viewing

[edit]
Cottonwood Limestone caps Bluemont Hill in Manhattan, Kansas. Seen here is a very weathered outcrop just above the landmark MANHATTAN letters.

The Cottonwood Limestone is easily accessed or viewed in several locations:

  • On the Konza Prairie Nature Trail, as one climbs the trail from Kings Creek, the member forms the second bench. Here can be witnessed the characteristic line of boulders and shrubs that follow the rock layer around the hills. The characteristic springs can be found elsewhere on the trail feeding into Kings Creek.[32]
  • This limestone caps the landmark Bluemont Hill in Manhattan, Kansas, just above the white MANHATTAN letters.[4] This location may be accessed through the Bluemont Scenic Overlook park. The parking lot and walkways at the overlook are generally just above the Eskridge Shale; most of the Cottonwood Limestone having been quarried off long ago. A remnant of the quarry face can be found east of the "Little Apple" water tower and a well-exposed, weathered outcropping is next to the stairs a short distance further along the gravel trail.
  • This limestone is prominent on the bluffs lining the southern half of Tuttle Creek Lake where wave action has undercut the outcropping in several locations, exposing complete, less weathered faces. Here, a prominent and consistent outcropping visibly demonstrates the general Prairie Plains homocline[33] that is characteristic of the surface sedimentary formations in the region. Near the dam, the layer is some 40 feet above the usual lake level, but from there it can be seen to very slowly slope below the water miles to the northwest.

See also

[edit]

References

[edit]
  1. ^ D. E. Zeller, ed. (1968). "The Stratigraphic Succession in Kansas". Kansas Geological Survey Bulletin (189). University of Kansas Publications, State Geological Survey of Kansas: Permian System. Retrieved 2024-06-08. The Gearyan Stage (O'Connor, 1963) comprises three groups, the Admire, the Council Grove, and the Chase. It contains about 790 feet of rocks, which are predominantly limestone and shale, and contains units that are remarkably continuous laterally. The Gearyan Stage is named from Geary County in northeastern Kansas. Rocks of this stage are exposed throughout east-central Kansas in a north-northeast-trending belt from Cowley County on the Oklahoma border to Marshall and Brown counties on the Nebraska border.
  2. ^ a b c d Imbrie, John; Laporte, Léo F. & Merriam, Daniel F. (1964), Beattie Limestone Facies (Lower Permian) of the Northern Midcontinent, Kansas Geological Survey, Lawrence, Kansas.
  3. ^ C.A. Prosser (1894). "Kansas River Section of the Permo-Carboniferous and Permian Rocks of Kansas" (PDF). Bulletin of the Geological Society of America. 6: 29-54. Note: A significant theme of this work is the overview, comparison, and correlation of the prior publication on the Permian rocks of Kansas.
  4. ^ a b c d e f g h Jewett, John M. (1941). The Geology of Riley and Geary Counties, Kansas, Kansas Geological Survey Bulletin 39. University of Kansas Publications, State Geological Survey of Kansas.
  5. ^ a b c d Susan Ward Aber; David A. Grisafe (1982). Petrographic Characteristics of Kansas Building Limestones, Kansas Geological Survey, Bulletin 224. University of Kansas Publications, State Geological Survey of Kansas.
  6. ^ a b c d Prosser, Charles S.; Beede, J. W (1904). Description of the Cottonwood Falls Quadrangle (PDF). U. S. Geological Survey. Retrieved 2015-02-21.
  7. ^ "Geologic Unit: Alma". Geolex – National Geologic Database. United States Geological Survey. Retrieved 2015-02-21.
  8. ^ Raymond C. Moore (1920). Oil and Gas Resources of Kansas, Kansas Geological Survey Bulletin 6, Part II. p. 55.
  9. ^ a b c "Building Materials and Tools". Tallgrass Prairie. National Park Service. Retrieved 2015-01-04.
  10. ^ West, R. R.; Miller, K. B. & Watney, W. L. (2010), The Permian System in Kansas, Kansas Geological Survey Bulletin 257, Kansas Geological Survey, Lawrence, Kansas.
  11. ^ a b Mudge, Melville R.; Robert H. Burton (1958). Geology of Wabaunsee County Kansas, Geological Survey Bulletin 1068 (PDF). U.S. Department of the Interior. p. 73.
  12. ^ "Topeka Municipal Auditorium". Kansas Geological Survey. Retrieved 2015-01-08.
  13. ^ "Gallery: Great Overland Station". U.S. Stone Industries LLC – Bayer Stone & U.S. Stone. Retrieved 2015-01-05.
  14. ^ "Campanile, Mount Oread, University of Kansas". Kansas Geological Survey. Retrieved 2015-01-08.
  15. ^ "Gallery: Cottonwood". U.S. Stone Industries LLC – Bayer Stone & U.S. Stone. Retrieved 2015-01-05.
  16. ^ U.S. Stone Industries, St. Marys, KS
  17. ^ "Clements stone arch bridge". Kansas Geological Survey. Retrieved 2015-01-08.
  18. ^ "Dyche Hall Grotesques". University of Kansas. Archived from the original on 2015-02-23. Retrieved 2015-01-31.
  19. ^ Steven Spring. "Prairie Passage Stone Scupltures [sic]". Panoramio-Google Maps. Archived from the original on 2015-02-23. Retrieved 2015-01-31.
  20. ^ Jan Biles. "Sculpture honors Indian women". The Topeka Capital-Journal. Retrieved 2015-01-31.
  21. ^ Wellhead Protection Plans - Drinking Water Supply Wells - Fort Riley, Kansas. Directorate of Environment & Safety. 2001.
  22. ^ Dumler, Alvin (1973-08-23). "Lane, Kiowa strike, highlight week's oilpatch activities". The Hutchinson News. Hutchinson, Kansas. p. 8.
  23. ^ Dumler, Alvin (1973-09-29). "Fairly strong drilling pace during September". The Hutchinson News. Hutchinson, Kansas. p. 8.
  24. ^ Dumler, Alvin (1975-01-22). "Gas prospects in two counties". The Hutchinson News. Hutchinson, Kansas. p. 8.
  25. ^ "Geologic Unit: Cottonwood". Geolex – National Geologic Database. United States Geological Survey. Retrieved 2015-01-11.
  26. ^ J. A. L. Waddell. "Some Tests and Observations on Building Stones". Journal of the Association of Engineering Societies. IX. February 1890. no. 2. Retrieved 2015-01-31.
  27. ^ a b c d Laporte, Léo F. (1962). Paleoecology of the Cottonwood Limestone (Permian), Northern Mid-Continent (Abstract). The Geological Society of America, Inc.
  28. ^ "Colors". Higgins Stone Company. Retrieved 2015-01-18.
  29. ^ "Cottonwood". U.S. Stone Industries LLC – Bayer Stone & U.S. Stone. Retrieved 2015-01-18.
  30. ^ a b Raymond C. Moore (1964). Paleoecological Aspects of Kansas Pennsylvanian and Permian Cyclothems, Symposium on cyclic sedimentation: Kansas Geological Survey, Bulletin 169. University of Kansas Publications, State Geological Survey of Kansas. pp. 287–380, Units 4, 5, and 6.
  31. ^ Raymond C. Moore; John Mark Jewett; Howard G. O'Connor; et al. (1951). Geology, Mineral Resources, and Ground-water Resources of Chase County, Kansas, Kansas Geological Survey Volume 11. University of Kansas Publications, State Geological Survey of Kansas.
  32. ^ Konza Prairie Nature Trail - Self-Guided Tour (PDF). Konza Environmental Education Program. p. tour points #7 and #17.
  33. ^ Chelikowsky, J. R. (1972). Structural Geology of the Manhattan, Kansas, Area, Kansas Geological Survey, Bulletin 204, part 4. University of Kansas Publications, State Geological Survey of.
[edit]

Retrieved from "https://en.wikipedia.org/w/index.php?title=Cottonwood_Limestone&oldid=1235941737"