Jump to content

Cisco Snap 100

From Wikipedia, the free encyclopedia
Snap 100
Type Piston aircraft engine
National origin Italy
Manufacturer Cisco Motors
Major applications Paramotor

The Cisco Snap 100 is an Italian-designed piston engine for use in powered paragliding. It is a two-stroke, 96 cc capacity, single-cylinder, lightweight engine with electronic ignition, producing 17 BHP at 9000 rpm. It is designed and built by Cisco Motors.[1]

Accidents and incidents

[edit]

The propeller assembly on the Snap 100 is held in by one bolt and has been prone to fall out and cause the propeller to fall off.[2]

Applications

[edit]

Specifications (Snap 100)

[edit]

Data from [1]

General characteristics

Components

  • Valvetrain: Piston ported two-stroke
  • Fuel system: Walbro WB32 carburettor since 2007 WG08
  • Fuel type: 92-98 Octane petrol
  • Oil system: Pre-mixed synthetic two-stroke oil, ratio 40:1
  • Cooling system: Fan cooled
  • Reduction gear: 3.63:1 reduction ratio, clutch operated.
  • Starting system Manual 'pull cord' starting system

Performance

See also

[edit]

Related development

Related lists

References

[edit]

Notes

[edit]
  1. ^ a b World Directory of Leisure Aviation. Ivy-sur-Seine, France: Editions Retine. 2005–2006. ISSN 1368-485X.
  2. ^ "Snap 100 Prop Departures". United States Powered Paragliding Association. 15 September 2005. Archived from the original on 7 September 2008. Retrieved 2009-08-18.
  3. ^ "Bailey Snap 100" (PDF). Bailey Aviation. Archived from the original (PDF) on 2011-07-07. Retrieved 2009-08-18.
  4. ^ "Fly Products Ryan". Fly Products Ryan. Retrieved 2009-08-18.
  5. ^ "Fresh Breeze Snap 100". USWingNuts. 15 September 2005. Archived from the original on 4 October 2008. Retrieved 2009-08-18.
  6. ^ "Clemente Snap 100". Clemente Paramotor. Retrieved 2009-08-18.
[edit]