Cheongpung Bridge
Cheongpung Bridge 청풍대교 | |
|---|---|
.JPG) | |
| Coordinates | 37°00′12″N 128°10′47″E / 37.00347°N 128.179593°E |
| Carries | Route 82 |
| Crosses | Chungju Lake |
| Locale | North Chungcheong Province, South Korea |
| Characteristics | |
| Longest span | 327m |
| History | |
| Constructed by | Daelim Industrial Co. |
| Location | |
 | |
Cheongpung Bridge (Korean: 청풍대교; RR: Cheongpungdaegyo) is a cable-stayed bridge[1] which crosses the lake formed by Chungju Dam[2] (part of the Namhan River system, a tributary of the Han River) in North Chungcheong Province, South Korea on Route 82 in that region.
The bridge project began in December 2004 and was scheduled to be completed in September 2010,[3] to replace an existing PSC box girder bridge which had required periodic rehabilitation and repair work. As the area where the bridge was constructed has well-known natural scenery and attractions, it was designed to support tourism development plans.[4]
Construction and design
[edit]The bridge was built by contractor Daelim Industrial Co., LTD,[3] at a contract price of 40.3 million USD.[5] Concrete pylon height with typical H-shape is 103m and constructed by auto climbing form. The main span of 327m across the lake is constructed using the free cantilever method and the side span of 57.5m is constructed by the full staging method.[4] The combination of composite section (reinforced concrete deck and I-shaped steel girder) for the center span and concrete section for side spans applied to the bridge because of decreasing effect of weight balance. The concrete pylons have typical H-shape. The leg shape beneath the superstructure level, on the other hand, needed to be narrower dto make the size of foundation smaller allowing less rock excavation at foundation locations and better handling of construction unit (caisson) considering the site condition. The cable is a multi strand system as two planes semi-fan, and there is extra pier support in each side span. To maximize the counter weight effect by concrete girder at side span, it was necessary to make the side span heavier as possible and not to have excessive bending moment by increasing dead load. Here, the extra pier support allows more weight and stiffness in the side span without resulting in excessive bending moment in girders and pylons.[6]
| Carries | 2lanes |
| Location | Mooltae-ri~Dohwa-ri, Sheongpung-myeon, Jecheon-si, Chungcheongbuk-do |
| Total length | 442m[3] |
| Width | 14.5m[3] |
| Height | 103m[3] |
| Longest span | 327m[3] |
| Construction begin | DEC. 2004[3] |
| Construction end | SEP. 2010[3] |
Gallery
[edit]-
Cheong Poong Bridge _View1 -
Cheong Poong Bridge _View2 -
Cheong Poong Bridge _View4
.JPG)
.jpg)
.JPG)
See also
[edit]References
[edit]- ^ "Cheongpung Bridge (Jecheon, 2010)". Structurae. Retrieved 2024-07-17.
- ^ "청풍대교 - 디지털제천문화대전". www.grandculture.net. Retrieved 2024-07-17.
- ^ a b c d e f g h "BAS 89810 Cheong Poong Bridge - brueckenweb.de - brueckenweb.de". www.brueckenweb.de. Retrieved 2024-07-17.
- ^ a b "Construction of Hybrid Cable-Stayed Bridge",D.G Kim, H.C Kwon, K.J. Lee, IABMAS, 2010
- ^ “Daelim bridge 2013 http://www.daelim.co.kr/static/data/brochure_eng.pdf Archived 2014-07-26 at the Wayback Machine
- ^ "Design of Cheong-poong bridge (Steel-concrete Hybrid cable-stayeg)", D-H. Yoo, J-S. Ko and C.Moon., 3rd International Symposium on Steel Structures, March 2005