Cessna CR-1
Appearance
Cessna CR-1 | |
---|---|
Role | Air racer |
National origin | United States of America |
Manufacturer | Clyde V. Cessna Aircraft Company |
Number built | 1 |
Variants | Cessna CR-2 |
The Cessna CR-1 was a short-lived air racer that was part of the CR series of Cessna racers.
Design and development
[edit]The Cessna CR-1 was built using $1200 in winnings from the Cessna GC-1.[1]
The aircraft was a mid-wing open cockpit taildragger using a fabric covered wooden wing structure. The landing gear was manually retractable into the fuselage.[2]
Operational history
[edit]The aircraft was tested by Eldon Cessna. The one and only flight required a 100 mph launch speed, and 130 mph approach speed to keep the aircraft controllable.
Variants
[edit]After the sole test flight, the CR-1 was grounded and redesigned as the Cessna CR-2.
Specifications (Cessna CR-1)
[edit]Data from Sport Aviation
General characteristics
- Capacity: 1
- Length: 12 ft (3.7 m)
- Wingspan: 16 ft (4.9 m)
- Wing area: 40 sq ft (3.7 m2)
- Powerplant: 1 × Warner Scarab 422 radial, 110 hp (82 kW)
See also
[edit]Related development
References
[edit]- ^ "The Cessna CR-1 and CR-2 Racers". Sport Aviation. April 1958.
- ^ "Clyde Cessna's budget racer". Archived from the original on 27 December 2010. Retrieved 27 April 2011.