British standard ordnance weights and measurements
The British standard ordnance weights and measurements for the artillery were established by the Master General of Ordnance in 1764, and these were not altered until 1919, [citation needed] when the metric system was additionally introduced.
This system has largely been replaced by defining the weapon in terms of the measurement of the calibre, which is the standard today for most weapon systems in use by the world's armed forces.
The 18th century standards were based on a projectile's weight, which dates back to use of muzzle loaded cannons that fired solid cannonballs. The bore designations are only an approximate relationship to the actual weight of the projectile when it was applied to modern artillery.
The table below lists the metric and Imperial calibres of various British weapons, which utilised the standard after 1919:
Name | Type | Calibre | |
---|---|---|---|
Metric | Imperial | ||
Ordnance QF 1-pounder "pom pom" | Infantry gun/AA gun | 37 mm | 1.457 inch |
Ordnance QF 2-pounder | Anti-tank gun | 40 mm | 1.575 inch |
Ordnance QF 2-pounder "pom pom" | Anti-aircraft gun | 40 mm | 1.575 |
Ordnance QF 3-pounder Vickers | Naval gun | 47 mm | 1.85 inch |
Ordnance QF 6-pounder | Anti-tank gun | 57 mm | 2.244 inch |
Ordnance BL 10-pounder Mountain gun | Mountain gun | 69.8 mm | 2.75 inch |
12-pounder (multiple types) | Light field gun | 76.2 mm | 3 inch |
Ordnance QF 13-pounder | Light field gun | 76.2 mm | 3 inch |
15- pounder (multiple types) | Field gun | 76.2 mm | 3 inch |
Ordnance QF 17- pounder | Anti-tank gun | 76.2 mm | 3 inch |
Ordnance QF 18- pounder | Field gun | 83.8 mm | 3.3 inch |
Ordnance QF 20-pounder | Tank gun | 83.8 mm | 3.3 inch |
Ordnance QF 25-pounder | Gun-howitzer | 87.6 mm | 3.45 inch |
Ordnance QF 32-pounder | Tank gun | 94 mm | 3.7 inch |
Ordnance QF 60-pounder | Heavy field gun | 127 mm | 5 inch |
Terminology
[edit]When used with British standard nomenclature:
- BL is short for "Breech Loading", but generally means not QF, i.e. separate cordite bags rather than a cartridge case.
- ML is short for "Muzzle Loading".
- PR is short for "Pounder", e.g. 20 Pounder can be shortened to "20-PR". pdr is also a common shortening of "pounder", e.g. 17pdr.
- QF is short for "Quick Firing", indicating the weapon is breech-loaded with the propellant in a cartridge case which also made the breech seal, allowing faster loading and firing.
See also
[edit]References
[edit]- Rottman, Gordon L.: Elite 124 - World War II Infantry Anti-Tank Tactics, Osprey publishing, ISBN 1-84176-842-1 p. 16
- Collins, A.R. "British Cannonball Sizes" https://www.arc.id.au/Cannonballs.html