Jump to content

Brighton and Rottingdean Seashore Electric Railway

Coordinates: 50°48′19″N 0°4′30″W / 50.80528°N 0.07500°W / 50.80528; -0.07500
From Wikipedia, the free encyclopedia

Pioneer on the 18 ft (5,486 mm) gauge railway.
An advertisement, offering "a Sea Voyage on Wheels".
Former trackbed in 2004.

The Brighton and Rottingdean Seashore Electric Railway was a unique coastline railway in Brighton, England, that ran through the shallow coastal waters of the English Channel between 1896 and 1901.[1] It was designed by Magnus Volk to extend his Volk's Electric Railway from its terminus in Paston Place to the village of Rottingdean and avoid difficult terrain. While the railway was popular and carried tens of thousands of passengers, it was ultimately abandoned to make room for new sea defences, and Volk was unable to raise the funds to construct a replacement.

Background and construction

[edit]

Magnus Volk, its owner, designer and engineer, had already been successful with the more conventional Volk's Electric Railway, which had then not been extended east of Paston Place. With unfavourable geography in that area, Volk decided to construct a line through the surf from a pier at Paston Place to one at Rottingdean. This was also home to Volk's Seaplane Station which was used by his son George Herbert Volk.

The railway itself consisted of two parallel 2 ft 8+1⁄2 in (825 mm) gauge tracks, billed as 18 ft (5,486 mm) gauge, the measurement between the outermost rails.[2] The tracks were laid on concrete sleepers mortised into the bedrock. The single car used on the railway was a 45 by 22 ft (13.7 by 6.7 m) pier-like building which stood on four 23 ft (7.0 m)-long legs. The car weighed 45 long tons (50 short tons; 46 t) and was propelled by two vertically mounted General Electric 25-horsepower (19 kW) electric motors operating through shafts to worm drives on two of the four bogies. Rod-operated brakes were fitted to the other two bogies. The controls were on the upper promenade deck (the railed enclosure surrounding the skylight of the passenger saloon). Although originally intended to be powered by accumulators, electricity was supplied by two overhead lines suspended alongside the tracks; initially only one wire had been used, with an earth return through the rails (or the sea itself at high tide). The power station, beneath the pier at Rottingdean, was equipped with a 100-horsepower (75 kW) steam engine from William Sissons and Co. of Gloucester driving a 50 kW dynamo at 500 volts.[3][4][5] It was officially named Pioneer, but many called it Daddy Long-Legs.[6] Due to regulations then in place, a qualified sea captain was on board at all times, and the car was provided with lifeboats and other safety measures.

Construction took two years from 1894 to 1896. The railway officially opened on 28 November 1896, but was nearly destroyed by a storm the night of 4 December. Volk immediately began rebuilding the railway, including the Pioneer, which had been knocked on its side. Pioneer was salvaged and brought ashore, and rebuilt with the legs two feet higher than the previous design. After repairs to Pioneer and the railway were complete, service resumed on 20 July 1897.[5] By the end of that year, 44,282 passengers had travelled on Volk's "Sea Voyage on Wheels".[5]

In use

[edit]

The railway was popular, but encountered difficulties. The car was slowed considerably at high tide, but Volk could never afford to improve the motors.[5] In 1900, groynes built near the railway were found to have led to underwater scouring under the sleepers and the railway was closed during portions of July and August of that year while this was repaired.[5] Immediately afterwards, the council decided to build a beach protection barrier, which required Volk to divert his line around the barrier. Without funds to do so, Volk closed the railway.

In 1901 the right-of-way was broken up for construction of the barrier. One further attempt was made to raise money for a conventional over-water viaduct along roughly the same route, but Volk was unable to gather enough funds and nothing came of this.[5]

Legacy

[edit]
Volk's prototype model of "Pioneer", in the Brighton Toy and Model Museum.

The track, car and other structures were sold for scrap but, as of 2021, some of the concrete sleepers can still be viewed at low tide.[7] Eventually Volk's Electric Railway was extended onshore, covering a portion of the same distance; it remains in operation.

A model of the railway car is on display (along with a poster for the railway) in the foyer of the Brighton Toy and Model Museum.

Similar forms of transport

[edit]

On rails

[edit]

Other

[edit]
  • BARV, a tracked military vehicle designed to wade through seawater up to 3 metres (9 ft 10 in) deep.
  • Sea tractor, a motor vehicle that can travel through shallow water, with driver and passengers on a raised platform.

References

[edit]
  1. ^ Coast. BBC2 programme. Transmitted 6 May 2013
  2. ^ "Volk's Electric Sea Railway, Daddy Long Legs, The Brighton to Rottingdean Seashore Electric railway, Brighton, East Sussex, England, UK". www.urban75.org.
  3. ^ "Brighton and Rottingdean Tramway". The Electrical Engineer. Vol. 16. London. 8 November 1895. pp. 536–541.
  4. ^ Easdown, Martin (2019). The Extraordinary Daddy-Long-Legs Railway of Brighton. Stroud, England: Amberley. ISBN 9781445689357.
  5. ^ a b c d e f "The Daddy Long Legs | VERA | Volk's Electric Railway Association, Brighton". volkselectricrailway.co.uk. Retrieved 22 August 2021.
  6. ^ "Daddy long-legs—a weird and wonderful railway". National Railway Museum blog. Retrieved 22 August 2021.
  7. ^ "Google Maps". Retrieved 25 November 2021.
  8. ^ a b Jackson, Alan (1993). Volk's Railways Brighton. Plateway Press. ISBN 1 871980 18 6.
[edit]
Wikimedia Commons has media related to Brighton and Rottingdean Seashore Electric Railway.

50°48′19″N 0°4′30″W / 50.80528°N 0.07500°W / 50.80528; -0.07500

Retrieved from "https://en.wikipedia.org/w/index.php?title=Brighton_and_Rottingdean_Seashore_Electric_Railway&oldid=1255971260"