Alan R. Barton Plant
The Alan R. Barton Nuclear Plant was a proposed commercial nuclear power plant in central Alabama, United States.
Proposed plant
[edit]Alabama Power Company proposed constructing four 1,159 MWe General Electric Boiling Water Reactors at the site approximately 15 miles southeast of Clanton, Alabama.[1] 32°45′N 86°24′W / 32.750°N 86.400°W [2]
The proposed plant was named after Alabama Power Company Senior Vice President Alan R. Barton.[3]
The proposed plant was identified by the acronym ABNP in Nuclear Regulatory Commission correspondence. [4]
1970s cancellation
[edit]Barton 3 & 4 were canceled in 1975 while under 10CFR50 Construction Permit (CP) review. Two years later, Barton 1 & 2 were canceled during the CP review process as well.[1]
Reactor data
[edit]The nuclear power plant was to have had four units:
| Unit | Reactor type |
Net capacity |
Gross- capacity |
Planned | Canceled |
|---|---|---|---|---|---|
| Barton-1 [5] | General Electric Boiling Water Reactor (BWR/6) | 1.209 MW | 1.254 MW | 1972 | 01.11.1977 |
| Barton-2 [6] | General Electric Boiling Water Reactor (BWR/6) | 1.209 MW | 1.254 MW | 1972 | 01.11.1977 |
| Barton-3 [7] | General Electric Boiling Water Reactor (BWR/6) | 1.209 MW | 1.254 MW | 1974 | 01.11.1975 |
| Barton-4 [8] | General Electric Boiling Water Reactor (BWR/6) | 1.209 MW | 1.254 MW | 1974 | 01.11.1975 |
References
[edit]- ^ a b NUREG-1350 (Volume 18), U.S. Nuclear Regulatory Commission: August 2006.
- ^ D. F. Cope; H. F. Bauman (November 1977). Expansion Potential for Existing Nuclear Power Station Sites (PDF) (Report). National Technical Information Service. pp. 16–21. ORNL/TM-5927. Archived from the original (PDF) on 2017-02-11. Retrieved 23 February 2017 – via Oak Ridge National Laboratory.
- ^ NRC letter GL79054
- ^ NUREG-0544 (Rev. 4), NRC Collection of Abbreviations
- ^ Barton 1 on the PRIS of the IAEA
- ^ Barton 2 on the PRIS of the IAEA
- ^ Barton 3 on the PRIS of the IAEA
- ^ Barton 4 on the PRIS of the IAEA
