Azimuth recording
 | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (August 2023) |
Azimuth recording is the use of a variation in angle between two recording heads that are recording data so close together on magnetic tape that crosstalk would otherwise likely occur. Normally, the head is perpendicular to the movement of the tape, and this is considered zero degrees. However, if the heads are mounted at slightly different angles (such as ±7 degrees in VHS), destructive interference will occur at high frequencies when reading data recorded in the cross-talking channel but not in the channel that is intended to be read. At low frequencies relative to the maximum allowed by the head gap, however, this technique is ineffective. Thus one head is slanted slightly leftwards and the magnetic gap of the other head slanted slightly rightwards.
To look at it another way, channel A sees the channel B data stretched out in time, hence the technique has a low-pass effect on noise intruding from another channel.
Every videotape system was designed to put as much video as possible onto a given-sized tape, but information from one recording track (pass of the video head) must not interfere with information on adjacent stripes. Using slant azimuth recording, the need for guard bands, that is the blank space between tracks, is eliminated, allowing more recording to be placed on a given length of tape.[1][2][3]
All the early low-end reel-to-reel VTR machines and the first VCR cassette formats, the Philips and the Sony U-matic, used this system. Later, the JVC VHS and the Sony Betamax used slant azimuth recording also. These digital VTR versions used azimuth recording as well.
See also
[edit]References
[edit]- ^ Tozer, E. P. J. (November 12, 2012). Broadcast Engineer's Reference Book. CRC Press. ISBN 9781136024184 – via Google Books.
- ^ Capelo, Gregory; Brenner, Robert C. (June 26, 1998). VCR Troubleshooting and Repair. Newnes. ISBN 9780750699402 – via Google Books.
- ^ Trundle, Eugene (May 12, 2014). Newnes Guide to TV and Video Technology. Elsevier. ISBN 9781483183169 – via Google Books.
External links
[edit]- Canon Video Recording System Two rotating head[check spelling], helical scan azimuth recording.
- The Art of Digital Video, By John Watkinson, page 570
- Video engineering, By Arch C. Luther, Andrew F. Inglis, page 302.
- Google Patents, Magnetic head for azimuth recording in a high density magnetic recording system, Ken Takahashi et al.
- Society of Motion Picture and Television Engineers The Videotape Recorder: Its Evolution and the Present State of the Art of VTR Technology, by Hiroshi Sugaya1, September 17, 1985.
 | This electronics-related article is a stub. You can help Wikipedia by expanding it. |