2,3-Dichlorobutadiene
Appearance
Names | |
---|---|
Preferred IUPAC name
2,3-Dichlorobuta-1,3-diene | |
Other names
2,3-Dichloro-1,3-butadiene
| |
Identifiers | |
3D model (JSmol)
|
|
ChemSpider | |
ECHA InfoCard | 100.015.202 |
EC Number |
|
PubChem CID
|
|
UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
C4H4Cl2 | |
Molar mass | 122.98 g·mol−1 |
Appearance | Colorless liquid |
Density | 1.1829 g/cm3 |
Boiling point | 98 °C (208 °F; 371 K) |
Hazards | |
GHS labelling: | |
Danger | |
H225, H301, H302, H304, H315, H319, H330, H335, H411 | |
P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P273, P280, P284, P301+P310, P301+P312, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P320, P321, P330, P331, P332+P313, P337+P313, P362, P370+P378, P391, P403+P233, P403+P235, P405, P501 | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
2,3-Dichlorobutadiene is a chlorinated derivative of butadiene. This colorless liquid is prone to polymerization, more so than 2-chlorobutadiene. It is used to produce specialized neoprene rubbers.
It can be prepared by the copper-catalyzed isomerization of dichlorobutynes. Alternatively dehydrochlorination of 2,3,4-trichloro-1-butene:[1]
- CH2=C(Cl)CH(Cl)CH2Cl + NaOH → CH2=C(Cl)C(Cl)=CH2 + NaCl + H2O
2,3-Dichlorobutadiene is a precursor to 2,3-diarylbutadienes.[2]
References
[edit]- ^ M. Rossberg; et al. (2006). "Chlorinated Hydrocarbons". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a06_233.pub2. ISBN 978-3527306732.
- ^ Yamamoto Takakazu; Yasuda Takuma; Kobayashi Kazuaki; et al. (2006). "Utilization of Industrially Available 2,3-Dichloro-1,3-butadiene for Direct Synthesis of 2,3-Diaryl-1,3-butadienes". Bulletin of the Chemical Society of Japan. 79 (3): 498–500. doi:10.1246/bcsj.79.498.