Jump to content

GM Family 0 engine

From Wikipedia, the free encyclopedia
(Redirected from Z10XE)
Family 0
Family 0 engine in an Opel Adam
Overview
ManufacturerGeneral Motors
Also calledFamily Zero
Production1996–present
Layout
ConfigurationStraight-3, Straight-4
Displacement
  • 973 cc (59.4 cu in)
  • 998 cc (60.9 cu in)
  • 1,199 cc (73.2 cu in)
  • 1,229 cc (75.0 cu in)
  • 1,364 cc (83.2 cu in)
  • 1,398 cc (85.3 cu in)
Cylinder bore
  • 72.5 mm (2.85 in)
  • 73.4 mm (2.89 in)
Piston stroke
  • 72.6 mm (2.86 in)
  • 78.6 mm (3.09 in)
  • 80.6 mm (3.17 in)
  • 82.6 mm (3.25 in)
Cylinder block materialCast iron
Cylinder head materialAluminium
ValvetrainDOHC 4 valves x cyl. with VVT
Compression ratio9.5:1, 10.1:1, 10.5:1
Combustion
Fuel systemSequential MPFI
Fuel typeGasoline, E85
Oil systemWet sump
Cooling systemWater-cooled
Output
Power output55–140 PS (40.5–103 kW)
Torque output82–220 N⋅m (60–162 lb⋅ft)
Chronology
Predecessor
SuccessorSmall Gasoline Engine

The Family 0 is a family of inline piston engines that was developed by Opel, at the time a subsidiary of General Motors, as a low-displacement engine for use on entry-level subcompact cars from Opel/Vauxhall.

These engines feature a light-weight cast-iron semi-closed deck engine block with an aluminum cylinder head. The valvetrain consists of chain-driven hollowcast dual overhead camshafts (DOHC) that actuate 4-valves per cylinder via roller finger followers with hydraulic tappets. These engines also feature a 78 mm (3.1 in) bore spacing and fracture-split connecting rods.

Later versions also incorporate a variable length intake manifold (VLIM) and variable valve timing (VVT).

Originally debuting as either a 1.0 L (973 cc) straight-3 or 1.2 L (1,199 cc) straight-4; a 1.4 L (1,364 cc) I4 variant was added with the introduction of the second generation, replacing the 1.4 L Family 1 engine. The Family 0 engines were produced by Opel Wien in Vienna/Aspern (Austria), by GM in Bupyeong (Korea) and Flint (Michigan, USA).

Generation I

[edit]

The engine was first introduced in the 1996 Opel Corsa, either as a three-cylinder or as a four-cylinder version. This was Opel's first three-cylinder engine.

Name Displacement Configuration Bore Stroke Compression Ratio Power Torque
X10XE 1.0 L (973 cc) I3 72.5 mm (2.9 in) 78.6 mm (3.1 in) 10.1:1 40.5 kW (55 PS) 82 N⋅m (60 lb⋅ft) at 2800 rpm
Z10XE 42.7 kW (58 PS) 85 N⋅m (63 lb⋅ft)
X12XE 1.2 L (1,199 cc) I4 72.6 mm (2.9 in) 10.1:1 48 kW (65 PS) at 5600 rpm 110 N⋅m (81 lb⋅ft) at 4000 rpm
Z12XE 55 kW (75 PS) at 5600 rpm

Applications:

Generation II

[edit]

The second generation Family 0 began production in November 2002. It is an updated version of the Family 0 engine and features TwinPort technology – twin intake ports with a choke closing one of the ports at low RPM, providing strong air swirl pattern for higher torque levels and better fuel economy. The crankshaft and oil galleries were also redesigned to lower power loss; thereby increasing fuel economy.

Name Displacement Configuration Bore Stroke Compression Ratio Power Torque
Z10XEP 1.0 L (998 cc) I3 73.4 mm (2.9 in) 78.6 mm (3.1 in) 10.5:1 44 kW (59 hp) at 5600 rpm 88 N⋅m (65 lb⋅ft) at 3800 rpm
Z12XEP 1.2 L (1,229 cc) I4 72.6 mm (2.9 in) 59 kW (79 hp) at 5600 rpm 110 N⋅m (81 lb⋅ft) at 4000 rpm
Z14XEP 1.4 L (1,364 cc) 80.6 mm (3.2 in) 66 kW (89 hp) at 5600 rpm 125 N⋅m (92 lb⋅ft) at 4000 rpm

Applications:

Generation III

[edit]

The EcoFlex engine is a version of the TwinPort tuned to provide better fuel economy and lower emissions. The 1.4 L engine was introduced in 2008 and the 1.0 L engine in 2010. For model year 2012, the EcoFlex engines have been updated with double cam phasing (DCVCP) in a Gen III block.

Certain Opel and US-market Chevrolet versions of the Delta II platform compact cars use a turbocharged version of the 1.4 L engine with double variable cam phasing (DCVCP); in the future, an optional gasoline direct injection system will be introduced.[1] Opel versions feature Start&Stop system from 2011 and a Gen III block; a lower-power 120 ps version has been introduced as well. For model year 2013, the overboost to 220 N⋅m (162 lb⋅ft) has been added.[2]


Name Displacement Configuration Bore Stroke Compression Ratio Power Torque
A10XEP (LDB) 1.0 L (998 cc) I3 73.4 mm (2.9 in) 78.6 mm (3.1 in) 10.5:1 48 kW (64 hp) at 5300 rpm 90 N⋅m (66 lb⋅ft) at 4000 rpm
A12XEL (LWD) 1.2 L (1,229 cc) I4 72.6 mm (2.9 in) 51 kW (68 hp) at 5600 rpm 115 N⋅m (85 lb⋅ft) at 4000 rpm
A12XER (LDC) 62 kW (83 hp) at 5600 rpm
A14XFL (LUU) 1.4 L (1,398 cc) 82.6 mm (3.3 in) 63 kW (84 hp) at 4800 rpm 126 N⋅m (93 lb⋅ft) at 4800 rpm
A14XEL (L2Z) 64 kW (86 hp) at 6000 rpm 130 N⋅m (96 lb⋅ft) at 4000 rpm
A14XER (LDD) 74 kW (99 hp) at 6000 rpm
A14XFR (L2N)
A14NEL/B14NEL (LUH) 1.4 L (1,364 cc) 72.5 mm (2.85 in) 9.5:1 88 kW (118 hp) at 4800–6000 rpm
  • 200 N⋅m (148 lb⋅ft) at 1850–4200 rpm
  • 220 N⋅m (162 lb⋅ft) (Overboost)
A14NET (LUJ) 103 kW (138 hp) at 4900–6000 rpm
  • 200 N⋅m (148 lb⋅ft) at 1850–4900 rpm
  • 220 N⋅m (162 lb⋅ft) (Overboost)
U14NFT (LUJ) 103 kW (138 hp) at 4900–6000 rpm
  • 200 N⋅m (148 lb⋅ft) at 1850–4900 rpm
  • 220 N⋅m (162 lb⋅ft) (Overboost)
U14NFT (LUV) 103 kW (138 hp) at 4900 rpm 200 N⋅m (148 lb⋅ft) at 1850 or 2500 rpm
U14NFT (LUV - Vanderhall[3]) 134 kW (180 hp) at 4950 rpm[3] 250 N⋅m (184 lb⋅ft) at 2450 rpm[3]
Turbo engine in production

Applications:

References

[edit]
  1. ^ General Motors Europe (May 2008). "A Look Into the Future of Engines and Transmissions". New 1.4 Turbo.
  2. ^ "Opel | Stellantis".
  3. ^ a b c d https://vanderhallusa.com/venice/ (d/l 10-Jul-2019)
Wikimedia Commons has media related to General Motors Family 0 engines.
Retrieved from "https://en.wikipedia.org/w/index.php?title=GM_Family_0_engine&oldid=1256476834#Generation_I"