Water in Fuel sensor
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
A Water in Fuel Sensor, or WiF sensor, is an electronic sensor used to indicate the presence of water in fuel. It is installed in a fuel filter. When the water level in the water separator reaches the warning level, the WiF sends an electrical signal to the ECU or to dashboard (lamp).[1] The WiF is often used in common rail engines to avoid fuel injector damage.[2]
The WiF sensor uses the difference of electric conductivity of water compared to diesel and gasoline to determine the presence of water. The WiF sensor can consist of two electrodes that reads the level of resistance in the fluid or between the ground and the electrode.[3]
First generation WiF sensors use a potting resin to isolate the electronic circuit, while the latest generation of WiF sensors (the WS3 sensor in surface-mount technology) are made totally without leakage using an innovative co-molding process.
The latest generation of WiF sensors have a high resistance to vibrations and to thermal excursion cycles.
The main automotive WiF designer and producer is SMP Poland.[citation needed]
References
[edit]- ^ "Sensors/Water In Fuel Sensor WIF Sensor – KLM Performance". www.klmperformance.com. Retrieved 2019-11-23.
- ^ Parlatore, Bill (21 April 2017). "Down The Rabbit Hole: Finding Water In A Fuel Tank". PassageMaker. Retrieved 2019-11-23.
- ^ "Littelfuse Sensor Automotive Water Fuel Datasheet" (PDF). LittelFuse. 2018. Retrieved November 23, 2019.
.JPG){kind=small} | This article about an automotive part or component is a stub. You can help Wikipedia by expanding it. |