Jump to content

Watercut meter

From Wikipedia, the free encyclopedia
(Redirected from Water cut)

A water cut meter measures the water content (cut) of crude oil and hydrocarbons as they flow through a pipeline. While the title "Water cut" has been traditionally used, the current API naming is Water Cut Analyser or WCA as OWD or On-Line Water Determination is trademarked. The API and ISO committees have not yet come out with a standard for these devices. Though the API is currently in late stages of balloting a draft. There are however standards in place for fiscal automatic sampling of crude oil namely API 8.2 and ISO 3171.[1]

Water cut meters are typically used in the petroleum industry to measure the water cut of oil flowing from a well, produced oil from a separator, crude oil transfer in pipelines and in loading tankers. There are several technologies used. The main technologies are dielectric measurements using radio or microwave frequency and NIR measurements and less common are gamma ray based instruments.

The water cut is the ratio of water produced compared to the volume of total liquids produced from an oil well. The water cut in waterdrive reservoirs can reach very high values.[2]

References

[edit]
  1. ^ Water cut meter at Schlumberger Oilfield Glossary
  2. ^ Water cut at Schlumberger Oilfield Glossary