Viper (Six Flags Darien Lake)

Viper
The Viper's 121-foot lift hill
Six Flags Darien Lake
Location	Six Flags Darien Lake
Coordinates	42°55′42″N 78°22′54″W
Status	Operating
Opening date	May 29, 1982 (1982-05-29)
Cost	$6.5 million
General statistics
Type	Steel
Manufacturer	Arrow Dynamics
Designer	Ron Toomer
Model	Custom Looping Coaster
Lift/launch system	Chain lift hill
Height	121 ft (37 m)
Drop	75 ft (23 m)
Length	3,100 ft (940 m)
Speed	50 mph (80 km/h)
Inversions	5
Duration	2:04
Capacity	2100 riders per hour
Height restriction	48 in (122 cm)
Trains	2 trains with 7 cars. Riders are arranged 2 across in 2 rows for a total of 28 riders per train.
Viper at RCDB

Viper is a steel roller coaster located at Six Flags Darien Lake amusement park in Darien, New York, United States. Built by the newly-formed Arrow Huss, the ride opened in 1982 as the first roller coaster in the world to feature five inversions, surpassing Carolina Cyclone at Carowinds which featured four. Viper retained the inversions record until Vortex opened at Kings Island in 1987.

History

On November 17, 1981, Darien Lake announced that they would be building a new roller coaster for the 1982 season. It would be built by Arrow Huss and be the park's first major roller coaster. This one would also be the first roller coaster to take guests upside down five times. The new coaster was set to be named Thunderbolt Express, but this was changed to Viper.

Viper officially opened to guests on May 29, 1982. The track was originally all black, but it was repainted to a green track with black supports when Six Flags took over Darien Lake in 1999. In 2010, Darien Lake repainted the Viper all black again.

The trains were once color coded blue, red and yellow. In 2013, the trains were given green vinyl wraps. One train had an orange stripe and another had a blue stripe. The third train was disassembled and used for spare parts for the two other trains. Currently, Viper only runs with one train with the two trains switching out every year.

Ride experience

Inversions

	Inversion
1	Vertical Loop
2	Part 1 of Batwing Element
3	Part 2 of Batwing Element
4	Corkscrew
5	Corkscrew

Layout

After exiting the station house, the track makes a wide U-Turn to the lift hill, which then brings the car up 121 feet (37 m) above the ground. Technically speaking, the "first drop" of The Viper is about 10 feet (3.0 m), which gives the train enough momentum to round a bend to the right, before dropping off the first real hill of roughly 75 feet (23 m). At the bottom of the first drop, the train reaches its maximum speed of 50 mph (80 km/h), which is followed by a vertical loop. Next, the train enters a batwing element (also known as boomerang on Arrow Dynamics coasters), which is a heart-shaped series of two inversions, consisting of a reverse sidewinder followed by a sidewinder. By the time the train exits those, the track has turned 180° and is now headed back towards the station. After a left turn the train encounters the mid-ride brakes. Next, the track makes a 180° turn to the right and enters two consecutive corkscrews. Then its off into a 540° helix where the track goes through a 110' tunnel, then finally returns to the station.

Points of interest: The entrance queue goes under portions of the track, allowing an underneath point of view for observers. During the event FrightFest, there is an attraction where an old mini golf course used to stand underneath the track as well, now only accessible during FrightFest. Also, there is an on-ride camera that takes pictures of the guests and photos can be purchased at a shack near the ride's exit. In the past, this camera was mounted beside the end of the second corkscrew. For the 2017 season, the camera was positioned at the top of the entrance to the tunnel.

External links

• Viper at the Roller Coaster DataBase