N50, L50, and related statistics
 | This article includes a list of general references, but it lacks sufficient corresponding inline citations. (November 2015) |
In computational biology, N50 and L50 are statistics of a set of contig or scaffold lengths. The N50 is similar to a mean or median of lengths, but has greater weight given to the longer contigs. It is used widely in genome assembly, especially in reference to contig lengths within a draft assembly. There are also the related U50, UL50, UG50, UG50%, N90, NG50, and D50 statistics.
To provide a better assessment of assembly output for viral and microbial datasets, a new metric called U50 should be used. The U50 identifies unique, target-specific contigs by using a reference genome as baseline, aiming at circumventing some limitations that are inherent to the N50 metric. The use of the U50 metric allows for a more accurate measure of assembly performance by analyzing only the unique, non-overlapping contigs. Most viral and microbial sequencing have high background noise (i.e., host and other non-targets), which contributes to having a skewed, misrepresented N50 value - this is corrected by U50.[1]
Definition
[edit]N50
[edit]N50 statistic defines assembly quality in terms of contiguity. Given a set of contigs, the N50 is defined as the sequence length of the shortest contig at 50% of the total assembly length. It can be thought of as the point of half of the mass of the distribution; the number of bases from all contigs longer than the N50 will be close to the number of bases from all contigs shorter than the N50. For example, consider 9 contigs with the lengths 2,3,4,5,6,7,8,9, and 10; their sum is 54, half of the sum is 27, and the size of the genome also happens to be 54. Then, 50% of this assembly would be 10 + 9 + 8 = 27 (half the length of the sequence). Thus the N50=8, which is the size of the contig which, along with the larger contigs, contain half of sequence of a particular genome. Note: When comparing N50 values from different assemblies, the assembly sizes must be the same size in order for N50 to be meaningful.
N50 can be described as a weighted median statistic such that 50% of the entire assembly is contained in contigs or scaffolds equal to or larger than this value.
L50
[edit]Given a set of contigs, each with its own length, the L50 is defined as count of smallest number of contigs whose length sum makes up half of genome size. From the example above the L50=3.
N90
[edit]The N90 statistic is less than or equal to the N50 statistic; it is the length for which the collection of all contigs of that length or longer contains at least 90% of the sum of the lengths of all contigs.
NG50
[edit]Note that N50 is calculated in the context of the assembly size rather than the genome size. Therefore, comparisons of N50 values derived from assemblies of significantly different lengths are usually not informative, even if for the same genome. To address this, the authors of the Assemblathon competition came up with a new measure called NG50. The NG50 statistic is the same as N50 except that it is 50% of the known or estimated genome size that must be of the NG50 length or longer. This allows for meaningful comparisons between different assemblies. In the typical case that the assembly size is not more than the genome size, the NG50 statistic will not be more than the N50 statistic.
D50
[edit]The D50 statistic (also termed D50 test) is similar to the N50 statistic in definition though it is generally not used to describe genome assemblies. The D50 statistic is the lowest value d for which the sum of the lengths of the largest d lengths is at least 50% of the sum of all of the lengths.[2]
U50
[edit]U50 is the length of the smallest contig such that 50% of the sum of all unique, target-specific contigs is contained in contigs of size U50 or larger.[1]
UL50
[edit]UL50 is the number of contigs whose length sum produces U50.
UG50
[edit]UG50 is the length of the smallest contig such that 50% of the reference genome is contained in unique, target-specific contigs of size UG50 or larger.
UG50%
[edit]UG50% is the estimated percent coverage length of the UG50 in direct relation to the length of the reference genome. The calculation is (100 × (UG50/Length of reference genome). The UG50%, as a percentage-based metric, can be used to compare assembly results from different samples or studies.
Examples
[edit]Consider two fictional, highly simplified genome assemblies, A and B, that are derived from two different species. Assembly A contains six contigs of lengths 80 kbp, 70 kbp, 50 kbp, 40 kbp, 30 kbp, and 20 kbp. The sum size of assembly A is 290 kbp, the N50 contig length is 70 kbp because 80 + 70 is greater than 50% of 290, and the L50 contig count is 2 contigs. The contig lengths of assembly B are the same as those of assembly A, except for the presence of two additional contigs with lengths of 10 kbp and 5 kbp. The size of assembly B is 305 kbp, the N50 contig length drops to 50 kbp because 80 + 70 + 50 is greater than 50% of 305, and the L50 contig count is 3 contigs. This example illustrates that one can sometimes increase the N50 length simply by removing some of the shortest contigs or scaffolds from an assembly.
If the estimated or known size of the genome from the fictional species A is 500 kbp then the NG50 contig length is 30 kbp because 80 + 70 + 50 + 40 + 30 is greater than 50% of 500. In contrast, if the estimated or known size of the genome from species B is 350 kbp then it has an NG50 contig length of 50 kbp because 80 + 70 + 50 is greater than 50% of 350.
Alternate computation
[edit]N50 can be found mathematically for a list L of positive integers as follows:
- Create another list L' , which is identical to L, except that every element n in L has been replaced with n copies of itself.
- The median of L' is the N50 of L. (The 10% quantile of L' is the N90 statistic.)
For example: If L = (2, 2, 2, 3, 3, 4, 8, 8), then L' consists of six 2's, six 3's, four 4's, and sixteen 8's. That is, L' has twice as many 2s as L; it has three times as many 3s as L; it has four times as many 4s; etc. The median of the 32-element set L' is the average of the 16th smallest element, 4, and 17th smallest element, 8, so the N50 is 6. We can see that the sum of all values in the list L that are smaller than or equal to the N50 of 6 is 16 = 2+2+2+3+3+4 and the sum of all values in the list L that are larger than or equal to 6 is also 16 = 8+8. For comparison with the N50 of 6, note that the mean of the list L is 4 while the median is 3. To recapitulate in a more visual way, we have:
Values of the list L = (2, 2, 2, 3, 3, 4, 8, 8)
Values of the new list L' = (2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8)
Ranks of L' values = 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
See also
[edit]References
[edit]- ^ a b Castro, Christina J.; Ng, Terry Fei Fan (November 2017). "U50: A New Metric for Measuring Assembly Output Based on Non-Overlapping, Target-Specific Contigs". Journal of Computational Biology. 24 (11): 1071–1080. doi:10.1089/cmb.2017.0013. PMC 5783553. PMID 28418726.
- ^ Han, J.; Sanders, C. M.; Wang, C.; Yang, Q.; Wimbish, J.; Boone, B. E.; Thomas, S. J.; Levy, S.E. (25 September 2012). Measurement of T cell repertoire diversity in the peripheral blood by novel multiplex PCR and high-performance sequencing methods. MipTec. Basel Switzerland. Archived from the original on 5 October 2015. Retrieved 5 October 2015.
- Arachne wiki at Broad Institute
- Miller, JR; Koren, S; Sutton, G (2010). "Assembly algorithms for next-generation sequencing data". Genomics. 95 (6): 315–327. doi:10.1016/j.ygeno.2010.03.001. PMC 2874646. PMID 20211242.
- Earl, D; Bradnam, K; St. John, J; Darling, A; Lin, D; Fass, J; Yu, HOK; Buffalo, V; Zerbino, DR; Diekhans, M; Nguyen, N; Ariyaratne, PN; Sung, W-K; Ning, Z; Haimel, M; Simpson, JT; Fonseca, NA; Birol, I; Docking, TR; Ho, IY; Rokhsar, DS; Chikhi, R; Lavenier, D; Chapuis, G; Naquin, D; Maillet, N; Schatz, MC; Kelley, DR; Phillippy, AM; Koren, S (2011). "Assemblathon 1: A competitive assessment of de novo short read assembly methods". Genome Research. 21 (12): 2224–2241. doi:10.1101/gr.126599.111. PMC 3227110. PMID 21926179.
- L50-vs-N50 blog post (07-Oct-2015)
External links
[edit]- contig_info: A tool to estimate standard descriptive statistics from contig sequences, e.g. N(G)50, N(G)75, N(G)90, L(G)50, L(G)75, L(G)90, auN ...