Jump to content

Renfe Class 310

From Wikipedia, the free encyclopedia
(Redirected from RENFE Class 310.1)
Renfe 310
Renfe 310.009 (August 2003)
Type and origin
Power typeDiesel-electric
BuilderMeinfesa, Wesa[1]
GM-EMD (engine)[1]
ModelSW 1001 AC[1]
Build date1989-91[2]
Total produced60[2]
Specifications
Configuration:
 • UICBo'Bo'[2]
Gauge1,668 mm (5 ft 5+2132 in)[2]
Wheel diameter1,067 mm (42.0 in)[1]
Length12.550 m (41 ft 2.09 in)[1]
Width3.085 m (10 ft 1.46 in)[1]
Height4.305 m (14 ft 1.49 in)[1]
Loco weight78 t (77 long tons; 86 short tons)[2]
Prime moverGM 8-645-E[1]
Engine typeTwo-stroke Diesel engine
Traction motors4[2]
TransmissionElectric
Loco brakePneumatic[2]
Performance figures
Maximum speed110 km/h (68 mph)[2] (or 114 km/h or 71 mph[1])
Power output598 kW (802 hp)[2]
Tractive effort131.59 kN (29,580 lbf) up to 17 km/h (4.7 m/s)[1]
Career
OperatorsRenfe
LocaleSpain

The Renfe Class 310 is a class of 60 four axle Bo'Bo' diesel-electric locomotives for shunting and freight built by Meinfesa with General Motors Electromotive Division components (engine, electrical transmission).

In the mid-2000s 4 units were converted to a subclass 310.1; a push-pull container train with a 310 class locomotive at each end; the units later became the property of Ferrocarrils de la Generalitat de Catalunya (FGC) and became the 353 Series.

History and design

[edit]

The Renfe 310 was ordered in the late 1980s as a replacement for the Renfe Class 307 and 308. The order was part of a modernisation of the diesel shunting fleet in the 1980s which also resulted in the Renfe Class 309 and 311. The 310 Class is a variant of the General Motors SW1001 switcher with a modified cab shape.

The locomotives were painted in the standard silver and red livery standard for Renfe shunting locomotives.[3]

As of 2010 the class are split between Adif and Renfe Mercancías.[3]

Class 310.1

[edit]

4 units have been converted to a formation known as "Medium Distance Teco" (TMD)[1] (Spanish: Teco de Media Distancia); this is a service intended to move containerised freight a distance between 120 and 300 km (75 and 186 mi), and compete with road transport.[note 1] Each train consists of 8 60 ft (18.29 m) wagons and a class 310 locomotive at either end, with a container capacity of 24 TEU.[4] The locomotives are connected by optical fibre.[2] The 310.1 locomotives received modified cabs, similar to the design of the rebuilt Renfe 333.3 subclass.

Later the two sets were sold to FGC and in 2009 began use transporting car parts to a SEAT factory.[5] Under FGC ownership the units became the class FGC 353.

See also

[edit]
  • EMD SW1001 General Motors switcher locomotive, and basis of the class 310 design

Notes

[edit]
  1. ^ The push-pull freight train concept is also found in the CargoSprinter (Germany) and M250 series (Japan)

References

[edit]
  1. ^ a b c d e f g h i j k "Caract. técnicas - Material motor - Renfe 310". www.listadotren.es (in Spanish).
  2. ^ a b c d e f g h i j Jorge Sanz Mongay. "SERIE 310". www.jorges.arrakis.es (in Spanish). Archived from the original on 2008-04-30. Retrieved 2010-08-28.
  3. ^ a b "ADIF - 310". www.listadotren.es (in Spanish).
  4. ^ Barry Cross (June 2004). "Freight innovations to win back traffic from road: Renfe's freight business unit is introducing innovations to try to increase traffic and win back market share from road while at the same time making better use of existing resources". findarticles.com. International Railway Journal.
  5. ^ "Cargometro: nuevo servicio de mercancías para Seat entre Barcelona y Martorell". www.vialibre-ffe.com (in Spanish). 5 June 2009.

Literature

[edit]
  • Enguix i Peiro, Joan Carles : Las nuevas locomotoras 310, in Carril n° 30, 06/1990
  • Galan Eruste, Manuel : Mercancias regionales : TMD. In Maquetren n° 125, 08/2003
  • Gutiérrez Ruiz, Antonio : Serie 310 : Metamorfosis, in Maquetren n° 130, 01/2004