Jump to content

HAWK beacon

Edit links
From Wikipedia, the free encyclopedia
(Redirected from Pedestrian hybrid beacon)

A HAWK beacon on the campus of Texas A&M University–Commerce

A HAWK beacon (high-intensity activated crosswalk beacon) is a traffic control device used to stop road traffic and allow pedestrians to cross safely. It is officially known as a pedestrian hybrid beacon. The purpose of a HAWK beacon is to allow protected pedestrian crossings, stopping vehicular traffic only as needed. The HAWK beacon is a type of traffic control alternative to traffic control signals and/or where an intersection does not meet traffic signal warrants.[1]: 509 

A HAWK beacon is used only for marked crosswalks. A similar hybrid beacon, called "emergency-vehicle hybrid beacons" are allowed at driveways of emergency service buildings such as fire stations.[1]: 513–515 

History

[edit]

The first beacon was developed in Tucson, Arizona by Transportation Administrator R. B. Nassi,[2] and installed in 2000. After being inspired by a trip to Bristol where he saw a pelican crossing, he developed a prototype and his wife suggested the abbreviation HAWK.[3] Prior to its full implementation, the HAWK beacon was categorized as an experimental device. At the time, United States transportation agencies that wanted to use the HAWK signal were required to obtain interim approval from the Federal Highway Administration (FHWA). The interim approval also required the agencies to collect and submit data on the effectiveness of the device. The device was fully implemented when it was included in the 2009 edition of the Manual on Uniform Traffic Control Devices (MUTCD) as a pedestrian hybrid beacon.[1]: 509–512 

Design

[edit]
Diagram of the signal head of a HAWK beacon

The vehicular signal head has three sections, consisting of two horizontally arranged circular red sections over a single circular yellow section that is centered between the red lights. The MUTCD requires at least two HAWK signal faces facing each vehicular approach to the crossing. Normal pedestrian signal heads control pedestrian traffic.

The MUTCD has guidelines that should be met before a HAWK beacon is installed. The guidelines consider pedestrian and vehicle traffic volumes, vehicle speeds, and roadway width.

Operation

[edit]
HAWK Signal
Animation demonstrating the operation of a HAWK beacon

Unlike ordinary traffic signals, the vehicular signal heads of a HAWK beacon are unlit until activated by a pedestrian who wishes to cross the roadway. The pedestrian signal heads operate normally, displaying an upraised hand (don't walk) aspect during the time that vehicles have the right of way.[4] When a pedestrian activates the beacon by pushing the pedestrian call button, the HAWK beacon sequence is started. First with flashing yellow, then steady yellow, and finally steady red over a period of several seconds. Pedestrian signal heads at either end of the crosswalk display the upraised hand (don't walk) signal until the HAWK beacon displays the steady red signal, at which time, the pedestrian heads change to the walking-person (walk) aspect.

As the pedestrian phase starts to end, the walking-person (walk) aspect changes to a flashing upraised hand (don't walk) with a countdown indicator. Pedestrians in the roadway should finish crossing the roadway, and anyone who wishes to cross but has not entered the roadway should reactivate the signal and wait. At this point, the vehicular signal heads change to display an alternating flashing red aspect. Vehicles must yield to any pedestrians still in the crosswalk. If the crosswalk is clear they may proceed after coming to a full stop.

Once the pedestrian crossing phase comes to an end, the countdown indicator reaches "0", and the pedestrian signal changes back to the non-flashing upraised hand (don't walk). Then the vehicle signal head returns to the dark state, and vehicle traffic has the right of way, until the signal is reactivated.

Sequence of signal

[edit]
Signal operation sequence and driver responsibility[5][6]
Pedestrian Hybrid Beacon aspect[1]: 511  Pedestrian Signal Aspect Driver response Pedestrian response
Drivers may proceed normally, without stopping at the crosswalk. Pedestrians press the pedestrian call button.
Drivers should slow down and prepare to stop soon. Pedestrians wait.
Drivers should stop, if able to do so safely. The signal is changing to red in a moment. Pedestrians continue to wait.
Drivers must stop before the crosswalk. Pedestrians may start crossing the street.
Drivers may proceed after coming to a full stop, and checking that the crosswalk is clear. (Similar to a stop sign.) Pedestrians already crossing the street should finish.
Pedestrians that have not started crossing the street, should not start.
Drivers may proceed without stopping, if the crosswalk is clear. Pedestrians press the pedestrian call button.
End of sequence.

Effectiveness

[edit]

One study released by the Federal Highway Administration observed after a week of installing a HAWK beacon at an intersection: there was a 29 percent reduction in total crashes, a 15 percent reduction in severe crashes, and a 69 percent reduction in pedestrian crashes. The percentages are compared with an unsignalized intersection (no treatment to the intersection).[7] Another report observed 97% motorists complied with the HAWK beacon. This is higher than crossings with flashing yellow beacons but not for signalized intersections.[8]

Some motorist confusion has been reported at newly installed HAWK beacons. When first introduced to an area, enforcement and public education are needed until users understand how the beacon works. When the beacon has not been activated, some drivers have acted as if the signal is dark due to a power outage, but that has not been experienced by all jurisdictions with HAWKs in operation. The flashing red phase is sometimes misunderstood by drivers farther back in the queue, and they follow the lead driver through the crosswalk instead of stopping at the stop line as required.[7] Additionally, motorists sometimes remain stopped during the flashing red phase when the crosswalk is clear due to the similarity to a railroad crossing signal.[9] In 2016, to help address this issue, the Federal Highway Administration authorized use of a new traffic sign, 'R10-23a', as an alternative sign to use at HAWK beacons. The alternative signage describes the steady red and flashing red aspects more clearly to drivers.[10]

HAWK signals were widely adopted in Phoenix, Arizona starting in 2018, resulting in significantly fewer crashes and fatalities citywide.[11]

Issues with unique meanings of HAWK signal aspects

[edit]
See also: Variations in traffic light operation § Pedestrian crossings

The design and operation of the HAWK beacon/crossing differs materially from the meanings and operation of the same signal aspects when used in other contexts, and thus may be unintuitive to drivers unfamiliar with them:

  • Some motor vehicle codes require that motorists stop at dark signals, which are typically indicative of an abnormality in the normal operation of the signal, such as a power failure. However, the dark signal is a normal display at HAWK beacons, where it designates the right-of-way for vehicular traffic.
  • Drivers may fail to appreciate the conversion of a flashing yellow to a steady yellow signal, and thence fail to comprehend that the signal is about to change from steady yellow to red. Flashing yellow signals in other contexts are simply caution markers, and do not convert to steady yellow and thence to red in this way.
  • At conventional traffic signals, the entire pedestrian crossing phase, including the entire flashing upright hand (don't walk) "pedestrian change interval" is protected from vehicle traffic of the roadway pedestrians are crossing. However, at HAWK crossings, during the flashing upright hand (don't walk) "pedestrian change interval", vehicles may legally proceed through the crosswalk after stopping. This could create a collision risk from a pedestrian not expecting a vehicle to enter the crosswalk.
  • The arrangement and colors can confuse colorblind drivers given that the red and yellow lights can appear to be the same color and so depend upon placement to distinguish.[12] Colorblind drivers may also rely on placement and assume that the bottom signal is green. If colorblind drivers misperceive the top two lights as yellow, this is contrary to the intention of the inventor R. B. Nassi, who said "We need to get red lights showing on these locations. Red means stop."[13]

Alternating flashing red aspect

[edit]

The alternating flashing red aspect used with the HAWK beacon has a different meaning than that of other traffic control devices.

  • The alternating flashing red (wig-wag) aspect is used in several other applications for vehicle control in the United States.

The MUTCD states if two horizontally aligned red signal indications are used on an approach for an intersection control beacon, they shall be flashed simultaneously to avoid being confused with grade crossing flashing-light signals (e.g. railroad crossings).[1]: 523  However, at a HAWK beacon, an alternating flashing red aspect instructs drivers to stop and proceed when clear, and is not supposed to be treated as stop and stay by drivers.

  • Emergency-vehicle hybrid beacons, for emergency vehicle facilities (i.e. fire stations), use the same signal head design, and uses an alternating flashing red aspect to protect departing emergency vehicles. The only distinguishing part of the design is a different sign, R10-14, which is used with the signal. Unlike at a HAWK beacon, drivers are expected to remain stopped during this time to allow emergency vehicles to enter the roadway.[1]: 513–515 

References

[edit]
  1. ^ a b c d e f Manual on Uniform Traffic Control Devices. Washington, DC: Federal Highway Administration. 2009. OCLC 777002425. Retrieved August 11, 2021.
  2. ^ Fitzpatrick, Kay (May 1, 2012). "Safety Effectiveness of the HAWK or Pedestrian Hybrid Beacon" (PDF). Texas Transportation Institute. Retrieved April 15, 2022.
  3. ^ Sanders, Rob (January 17, 2022). Can this "HAWK" STOP LIGHT make walking feel SAFE again?. Event occurs at 9 minutes and 14 seconds in. Retrieved May 31, 2022 – via YouTube. My wife and I were there in Bristol and I saw a signal unit. A red light stops all the cars but then it flashes yellow, which is more like a stop sign. This is what you got to do! That lets drivers go and it's clear, rather than waiting 30 seconds. If pedestrians are out of the way, no more wasting time. This is exactly what the United States had been looking for." "My wife came up with the name.
  4. ^ Chalmers, Mike (August 9, 2010). "New traffic signals make it safer for pedestrians". USA Today. Retrieved August 11, 2021.
  5. ^ "What should you know about... HAWK Pedestrian Signals?" (PDF). City of Des Moines. Engineering Department. p. 2. Archived from the original (PDF) on June 27, 2020. Retrieved August 13, 2021.
  6. ^ Slager, Melissa (December 19, 2016). "What those HAWK crosswalk signals mean for drivers". HeraldNet.com. Retrieved December 6, 2018.
  7. ^ a b Fitzpatrick, Kay; Park, Eun Sug (July 2010). Safety Effectiveness of the HAWK Pedestrian Crossing Treatment (PDF) (Report). Vol. FHWA-HRT-10-042. Federal Highway Administration. Retrieved June 9, 2023.
  8. ^ Godavarthy, Ranjit Prasad (2010). "2.1.5 Summary of the Fitzpatrick, et al. (2006) Study". Effectiveness of a Pedestrian Hybrid Beacon at mid-block pedestrian crossings in decreasing unnecessary delay to drivers and a comparison to other systems (PDF) (Master of Science thesis). Kansas State University. p. 16. Retrieved August 12, 2021.
  9. ^ Funk, Joel (October 16, 2015). "WYDOT: Signals have caused some confusion". Wyoming Tribune Eagle. Retrieved August 11, 2021.
  10. ^ "Interpretation Letter 4(09)-61 (I) — Use of an Alternative Pedestrian Hybrid Beacon Sign". Federal Highway Administration. December 5, 2016. Retrieved May 31, 2022.
  11. ^ Melissa Blasius (July 9, 2021). "How HAWK beacons save pedestrians' lives". ABC 15 Arizona.
  12. ^ "Signalized Intersections Informational Guide: Second Edition" (PDF). dot.gov. FHWA. July 1, 2013. Retrieved April 15, 2022. (the shape of the signal is clear, helping a color deficient driver identify red-yellow-green by placement rather than color
  13. ^ Video on YouTube
[edit]
Wikimedia Commons has media related to HAWK beacons.
Retrieved from "https://en.wikipedia.org/w/index.php?title=HAWK_beacon&oldid=1246188662"