Jump to content

Px27-775

From Wikipedia, the free encyclopedia
(Redirected from PKP class Px27)
Px27
Px27-775 in Museum in Wenecja
Type and origin
Power typesteam
BuilderFablok
Serial number343 & 344
ModelW5A
Build date1929
Total produced2
Specifications
Configuration:
 • Whyte0-8-0T
 • UICD (Dn2t+t)
Gauge600 mm (1 ft 11+58 in)
Driver dia.650 mm (26 in)
Tender wheels570 mm (22 in)
Minimum curve30 m (98 ft)
Wheelbase2,400 mm (7 ft 10 in) ​
 • Coupled800 mm (2 ft 7 in)
Length6,120 mm (20 ft 1 in)
(9,720 mm or 31 ft 11 in with tender)
Width2,000 mm (6 ft 7 in)
Height3,100 mm (10 ft 2 in)
Axle load4.25 t
Loco weight17 t
Tender weight9 t
Tender type2-axle
Fuel typecoal
Fuel capacity300 kg coal, 1.5 m3 water
Tender cap.1700 kg coal, 3.3 m3 water
Firebox:
 • Grate area0.88 m2 (9.5 sq ft)
Boiler pressure13 kg/cm2
Heating surface38 m2 (410 sq ft)
Cylinders2
Cylinder size285 mm (11.2 in) bore
350 mm (14 in) stroke
Valve gearHeusinger
Loco brakeSteam and hand
Performance figures
Maximum speed30 km/h (19 mph)
Power output110 hp
Tractive effort4265 kg
Career
OperatorsWyrzyskie Koleje Powiatowe
Polish State Railways (PKP)
Number in class2
Retired1976
Current ownerNarrow Gauge Railway Museum in Wenecja (Px27-775)
Dispositionexhibit

Px27 is a class of Polish State Railways (PKP) 600 mm (1 ft 11+58 in) narrow-gauge steam locomotive built by Fablok in Chrzanów, Poland, in 1929 (factory type W5A). Only two locomotives of this class were made, and one, Px27-775, is currently preserved.

History

[edit]

In 1927 Wyrzysk County Railways (Wyrzyskie Koleje Powiatowe) ordered two locomotives in the First Locomotive Factory in Poland (Fablok), fit for service on sloping line profile. Fablok designed and manufactured two W5A type locomotives in 1929.[1] After 1961 these were designated as PKP class Px27. It was a D (0-8-0T) locomotive with a two-axle tender. The design based upon Fablok's earlier W2A type tank locomotive (later Tx26-427). Only after nine years, in 1938 the third and last slightly differing locomotive of W5A type was ordered by other railway (it was later designed as Px38 class).[1]

Both locomotives, factory numbers 343 and 344, received stock numbers 25 and 26 respectively and stationed in Białośliwie depot.[1] Both survived World War II, working on their railway. After the war, all county railways were taken over by the Polish State Railways (PKP) and in 1947 the locomotives were included into PKP Px2 collective class and given numbers Px2-801 (ex 26) and 802 (ex 25).[1] According to new regulations, in 1961 both locomotives were classified as Px27 class, being the only ones in this class (P - locomotive with a tender, x - D axle arrangement, 27 – Polish origin locomotive designed in 1927). Px2-801 (factory no. 344) was renamed Px27-774, and Px2-802 (factory no. 343) was renamed Px27-775.[1]

After World War II both locomotives worked still on Bydgoszcz-Wyrzysk railway, basing in Białośliwie. Px27-774 was retired on 26 September 1970, and then scrapped.[1] Px 27-775 worked until 1976, then it was given to Narrow Gauge Railway Museum in Wenecja, as a cold exhibit.[1] (It might be noted, that also Px38-805 of W5A type is preserved in Wenecja).[1]

Build no. year no.: until 1948 1949-1960 from 1961 disposition
Fablok 343 1929 25 Px2-802 Px27-775 retired in 1976, preserved
Fablok 344 1929 26 Px2-801 Px27-774 retired in 1970, scrapped

References

[edit]
  1. ^ a b c d e f g h Pokropiński (2016), p. 38-42, 204
  • Pokropiński, Bogdan (2015). Parowozy wąskotorowe produkcji polskiej [Narrow-gauge steam locomotives of Polish production] (in Polish). Warsaw: Wydawnictwa Komunikacji i Łączności. ISBN 978-83-206-1963-8..

See also

[edit]
[edit]