Millbourne station
Millbourne  | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
.jpg) Station house as seen from Wister Drive | |||||||||||||
| General information | |||||||||||||
| Location | Wister Drive & Millbourne Avenue Millbourne, Pennsylvania | ||||||||||||
| Coordinates | 39°57′52″N 75°15′08″W / 39.9644°N 75.2523°W | ||||||||||||
| Owned by | Southeastern Pennsylvania Transportation Authority | ||||||||||||
| Platforms | 2 side platforms | ||||||||||||
| Tracks | 2 | ||||||||||||
| Construction | |||||||||||||
| Structure type | At-grade | ||||||||||||
| Accessible | Yes | ||||||||||||
| History | |||||||||||||
| Opened | March 4, 1907[1][2] | ||||||||||||
| Rebuilt | 2008[3] | ||||||||||||
| Previous names | 66th Street (concept name) | ||||||||||||
| Services | |||||||||||||
| |||||||||||||
| |||||||||||||
| |||||||||||||
| |||||||||||||
Millbourne station is a rapid transit station on SEPTA's Market-Frankford Line, located adjacent east of an intersection between Millbourne Avenue and Wister Drive in Millbourne, Pennsylvania. It is one of two ground-level stops on the Market–Frankford Line, as well as one of two SEPTA rapid transit stations located outside the Philadelphia city limits. The station lies two blocks north of the line's namesake street.
History
[edit]
Millbourne station is one of the original Market Street Elevated stations built by the Philadelphia Rapid Transit Company; the line opened for service on March 4, 1907 between 69th Street T.C. and 15th Street stations.[1][2]
The station was closed on April 23, 2007 for rehabilitation as part of a multi-phase reconstruction of the entire western Market Street Elevated.[4] The renovated station included new elevators, lighting, and other infrastructure, as well as a new brick station house.[3] Narrow wooden platforms[5] were replaced by concrete platforms complete with ADA-accessible tactile warning strips. The station reopened on June 16, 2008.[3]
During the Market–Frankford's rush-hour skip-stop service pattern, Millbourne was served by "B" trains, with "A" trains bypassing the station. Following a successful pilot program where all trains made all stops, the skip-stop practice was discontinued on February 24, 2020.[6][7]
Station layout
[edit]The station has two side platforms connected via an elevated walkway over the tracks to the station house at Wister Drive and Sellers Avenue. There is an additional exit-only gate at the east end of the eastbound platform, which leads to a staircase to North Millbourne Avenue, a dead-end residential street one block to the east.
References
[edit]- ^ a b Cox, Harold E. (1967). May, Jack (ed.). The Road from Upper Darby. The Story of the Market Street Subway-Elevated. New York, NY: Electric Railroaders' Association. p. 16. OCLC 54770701.
- ^ a b Hepp, John (2013). "Subways and Elevated Lines". The Encyclopedia of Greater Philadelphia.
- ^ a b c "Market Street Elevated (MSE) Reconstruction Project". SEPTA. Archived from the original on November 15, 2008.
- ^ "SEPTA 'Elebrates' End Of Project". September 11, 2009. Retrieved June 2, 2020.
- ^ Millbourne station on April 20, 2007, NYCSubway.org
- ^ Ralph, Pat (February 24, 2020). "SEPTA service changes mark end of skip-stop service on Market-Frankford Line". PhillyVoice. Retrieved June 2, 2020.
- ^ "SEPTA to Improve Market-Frankford Line Service Levels" (Press release). SEPTA. February 13, 2020. Retrieved June 2, 2020.
External links
[edit]
Media related to Millbourne station at Wikimedia Commons- SEPTA – Millbourne station
- Wister Drive and Sellers Avenue entrance from Google Maps Street View
- Images at NYCSubway.org
