Ion-attachment mass spectrometry

Ion attachment mass spectrometry
Acronym	IAMS
Related items	Chemical ionization

Ion-attachment mass spectrometry (IAMS) is a form of mass spectrometry that uses a "soft" form of ionization similar to chemical ionization in which a cation is attached to the analyte molecule in a reactive collision:

{\ce {{M}+ {X+}+ A -> {MX+}+ A}}

Where M is the analyte molecule, X⁺ is the cation and A is a non-reacting collision partner.^[1]

Principle

This technique is applicable to gases or any materials that can be vaporized. It uses a non-fragmenting non-conventional ionisation mode, by attachment of a lithium (or alkaline) ion to the gas to be analysed with a more traditional mass filter. This instrument is more dedicated to analysis of moderately-sized molecules such as organic or aromatic compounds.^[2]

Applications

Currently, it is used industrially to verify, with a high throughput, the concentrations of brominated flame retardants (BFR) in plastics in compliance with European RoHS (Restriction of Hazardous Substances) regulation in place since 2006. The banned molecules include PBB and PBDE, whose concentration should not exceed 0.1% w/w.^[3]^[4]^[5]

IAMS has also been used to analyze diesel exhaust particles,^[6] in ceramic processing ^[7] and in critical silicon etching during semiconductor manufacturing.^{[citation needed]}

References

^ P. Christopher Selvin1; Toshihiro Fujii (2001). "Lithium ion attachment mass spectrometry: Instrumentation and features". Review of Scientific Instruments. 72 (5): 2248. Bibcode:2001RScI...72.2248S. doi:10.1063/1.1362439.{{cite journal}}: CS1 maint: numeric names: authors list (link)
^ "Aromatic ion attachment mass spectrometry: an ion-molecule reaction for organosulfur analysis". Organic Mass Spectrometry.
^ "The guide of environmental quality assurance for a supplier of JVC" (PDF). JVC. July 2006.^{[permanent dead link‍]}
^ Pittcon 2006; Poster by Y. Shiokawa; The Rapid Analysis of Brominated Flame Retardants in Resin Used for Electrical Appliances by Ion Attachment Mass Spectrometry.
^ "State of bromine based flame retarding agent mixing and its countermeasure". Sangyo to Kankyo.
^ Masaki H, Chen L, Korenaga T (2006). "Direct analysis of diesel exhaust particles by fragmentation-free mass spectrometry using ion attachment mass spectrometry". Environmental Sciences. 13 (6): 347–52. PMID 17273150.
^ Tsugoshi T, Nagaoka T, Nakamura M, Shiokawa Y, Watari K (2006). "Application of ion attachment mass spectrometry to evolved gas analysis for in situ monitoring of porous ceramic processing". Anal. Chem. 78 (7): 2366–9. doi:10.1021/ac0518248. PMID 16579621.

Bibliography

Y. Shiokawa; M. Nakamura; H. Maruyama; Y. Hirano; Y. Taneda; M. Inoue; T. Fujii (2004). "Development of ion attachment mass spectrometry and its applications". Bunseki Kagaku (in Japanese). 53 (6): 475–489. doi:10.2116/bunsekikagaku.53.475.
M. Nakamura; K. Hino; T. Sasaki; Y. Shiokawa; T. Fujii (2001). "In situ analysis of perfluoro compounds in semiconductor process exhaust: Use of Li+ ion-attachment mass spectrometry". Journal of Vacuum Science and Technology A. 19 (4): 1105. Bibcode:2001JVSTA..19.1105N. doi:10.1116/1.1376704.
Fujii T.; Selvin P.C.; Sablier M.; Iwase K. (2001). "Lithium ion attachment mass spectrometry for on-line analysis of trace components in air: direct introduction". Journal of Vacuum Science and Technology A. 19 (1): 39–45. Bibcode:2001IJMSp.209...39F. doi:10.1016/S1387-3806(01)00469-9.
T. Ishiguro; A. Matsunami; K. Matsumoto; K. Kitagawa; N. Arai; A. K. Gupta (2001). "Mass Spectrometric Detection of Ionic and Neutral Species During Highly Preheated Air Combustion by Alkali Element Ion Attachment". Journal of Engineering for Gas Turbines and Power. 19 (4): 1105. doi:10.1115/1.1473158.

External links

US 7164121, Hirano, Yoshiki & Shiokawa, Yoshiro, "Ion attachment mass spectrometry method", published 2007-01-16, assigned to Anelva Corp.
US 7084397, Hirano, Yoshiki; Shiokawa, Yoshiro & Maruyama, Harumi et al., "Ion attachment mass spectrometry apparatus", published 2006-08-01, assigned to Anelva Corp.

[1] P. Christopher Selvin1; Toshihiro Fujii (2001). "Lithium ion attachment mass spectrometry: Instrumentation and features". Review of Scientific Instruments. 72 (5): 2248. Bibcode:2001RScI...72.2248S. doi:10.1063/1.1362439.{{cite journal}}: CS1 maint: numeric names: authors list (link)

[2] "Aromatic ion attachment mass spectrometry: an ion-molecule reaction for organosulfur analysis". Organic Mass Spectrometry.

[3] "The guide of environmental quality assurance for a supplier of JVC" (PDF). JVC. July 2006.^{[permanent dead link‍]}

[4] Pittcon 2006; Poster by Y. Shiokawa; The Rapid Analysis of Brominated Flame Retardants in Resin Used for Electrical Appliances by Ion Attachment Mass Spectrometry.

[5] "State of bromine based flame retarding agent mixing and its countermeasure". Sangyo to Kankyo.

[pmid17273150-6] Masaki H, Chen L, Korenaga T (2006). "Direct analysis of diesel exhaust particles by fragmentation-free mass spectrometry using ion attachment mass spectrometry". Environmental Sciences. 13 (6): 347–52. PMID 17273150.

[pmid16579621-7] Tsugoshi T, Nagaoka T, Nakamura M, Shiokawa Y, Watari K (2006). "Application of ion attachment mass spectrometry to evolved gas analysis for in situ monitoring of porous ceramic processing". Anal. Chem. 78 (7): 2366–9. doi:10.1021/ac0518248. PMID 16579621.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

v t e Mass spectrometry
Mass m/z Mass spectrum MS software Acronyms
Ion source	APCI APLI APPI CI DAPPI DART DESI DIOS EESI EI ESI FAB FD GD IA ICP LAESI MALDI MALDESI MIP PTR SESI SIMS SS SSI SELDI TI TS
Mass analyzer	Sector Wien filter Time-of-flight Quadrupole mass filter Quadrupole ion trap Penning trap FT-ICR Orbitrap
Detector	Electron multiplier Microchannel plate detector Daly detector Faraday cup Langmuir–Taylor detector
MS combination	MS/MS QqQ AMS Hybrid MS GC/MS LC/MS IMS/MS CE-MS
Fragmentation	BIRD CID ECD EDD ETD HCD IRMPD NETD SID
Category Commons WikiProject