Jump to content

File:Subsea blowout preventer stack riser mud.svg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (SVG file, nominally 2,625 × 1,223 pixels, file size: 36 KB)

Description
English: Schematic illustration of a subsea blowout preventer stack installed on the seabed with a riser insertion tube in place at the left and kill and choke lines connected to a top kill mud manifold on the right.

Legend:

  • red represents the blowout preventer stack
  • grey represents the oil flow passage
  • white tubing represents the kill (left) and choke (right) lines
  • brown represents the top of the subsea well casing
  • the five grey rectangles within the lower red shape represent ram-type blowout preventers
  • the two grey rectangles within the upper red shape represent annular-type blowout preventers
  • the orange pipes are flexible hoses connected to various rigid pipes
Date
Source

Own illustration, created with approximate reference to the following sources:

Using Inkscape 0.47.
Author User:84user
Other versions
Subsea blowout preventer stack with top kill mud lines shown unattached
stack with top kill mud lines attached
stack set up for a top kill plus riser insertion tube
stack in top kill mode plus riser insertion tube and kill mud manifold
large context diagram showing both sea surface and subsea
Public domain I, the copyright holder of this work, release this work into the public domain. This applies worldwide.
In some countries this may not be legally possible; if so:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.
 
W3C-validity not checked.
 
This W3C-unspecified vector image was created with Inkscape .

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

inception

27 May 2010

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current01:05, 28 May 2010Thumbnail for version as of 01:05, 28 May 20102,625 × 1,223 (36 KB)84user{{Information |Description={{en|1=Schematic illustration of a subsea blowout preventer stack installed on the seabed with a riser insertion tube in place at the left and kill and choke lines connected to a top kill mud manifold on the right. Legend: *red

The following page uses this file:

Retrieved from "https://en.wikipedia.org/wiki/File:Subsea_blowout_preventer_stack_riser_mud.svg"