Jump to content

File:Square rigged sail parts and running rigging.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (1,024 × 961 pixels, file size: 361 KB, MIME type: image/jpeg)

Summary

Description
English: Edges and corners of a square sail are shown on the uppermost sail:
  • The sail is attached to a spar (or yard) at its head and tensioned outwards at the head cringles.
  • The side edges are the leeches.
  • The bottom edge is the foot and is attached to the yard below by sheets (not labelled) at the clews which are the corners.

Running rigging is shown on the lower sail:

  • The lifts are shown slack, because the spar (or yard) is raised, but would support the lowered spar, as shown on the topmost spar.
  • The sheets pull the clews down to the yard below when setting sail.
  • The clewlines raise the clews to the yard above when dousing (striking or furling) sail.
  • The halyard raises a yard into place, seen as two line converging on a block, which is attached to a line that goes up to the crosstrees and through a sheave to raise the yard.
  • The braces adjust the sail side-to-side by tension applied from below to a block on the spar, countered by tension at the other end on a mast behind the spar, pulling one end aft and allowing the other end to rotate forward.

References:

Date
Source
File:Fortop2.jpg
Author Troels Eske

Licensing

w:en:Creative Commons
attribution
This file is licensed under the Creative Commons Attribution 3.0 Unported license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

inception

3 January 2017

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:03, 11 April 2017Thumbnail for version as of 21:03, 11 April 20171,024 × 961 (361 KB)HopsonRoadCorrected labeling.
14:37, 5 January 2017Thumbnail for version as of 14:37, 5 January 20171,024 × 961 (242 KB)HopsonRoadTopmost lifts are labeled.
04:25, 5 January 2017Thumbnail for version as of 04:25, 5 January 20171,024 × 961 (240 KB)HopsonRoadOrientation of text.
04:11, 5 January 2017Thumbnail for version as of 04:11, 5 January 20171,024 × 961 (240 KB)HopsonRoadIncludes ''head cringles''.
22:49, 4 January 2017Thumbnail for version as of 22:49, 4 January 20171,024 × 961 (235 KB)HopsonRoadUser created page with UploadWizard

Global file usage

The following other wikis use this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://en.wikipedia.org/wiki/File:Square_rigged_sail_parts_and_running_rigging.jpg"