Jump to content

File:Split-ring resonator array 10K sq nm.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Split-ring_resonator_array_10K_sq_nm.jpg (350 × 263 pixels, file size: 78 KB, MIME type: image/jpeg)

Summary

Description
English: Figure 2 Part of the left-handed metamaterial array configuration, which was constructed of copper split-ring resonators and wires mounted on interlocking sheets of fiberglass circuit board. The total array consists of 3 by 20 by 20 unit cells with overall dimensions of 10 by 100 by 100 mm.

Split-ring resonator consisting of an inner square with a split on one side embedded in an outer square with a split on the other side. Split-ring resonators are on the front and right surfaces of the square grid, and single vertical wires are on the back and left surfaces. References:

  1. Chevalier, Christine T.; and Wilson, Jeffrey D.: Frequency Bandwidth Optimization of Left-Handed Metamaterial. NASA/TM--2004-213403, 2004.
  2. Wilson, Jeffrey D.; and Schwartz, Zachary D.: Multifocal Flat Lens With Left-Handed Metamaterial. Appl. Phys. Lett., vol. 86, no. 2, 2005.
  3. Smith, D.R., et al.: Composite Medium With Simultaneously Negative Permeability and Permittivity. Phys. Rev. Lett., vol. 84, no. 18, 2000.
  4. Shelby, R.A., et al.: Microwave Transmission Through a Two-Dimensional, Isotropic, Left-Handed Metamaterial. Appl. Phys. Lett., vol. 78, no. 4, 2001.
Date
Source NASA Glenn Research
Author Jeffrey.D.Wilson@nasa.gov (Glenn research contact)
Permission
(Reusing this file)		 Public Domain

Licensing

Public domain This file is in the public domain in the United States because it was solely created by NASA. NASA copyright policy states that "NASA material is not protected by copyright unless noted". (See Template:PD-USGov, NASA copyright policy page or JPL Image Use Policy.)
Warnings:

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

inception

6 October 2006

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:54, 2 August 2009Thumbnail for version as of 17:54, 2 August 2009350 × 263 (78 KB)Ti-30X{{Information |Description={{en|1=[http://www.grc.nasa.gov/WWW/RT/2005/RC/RCE-wilson1.html Figure 2] Part of the left-handed metamaterial array configuration, which was constructed of copper split-ring resonators and wires mounted on interlocking sheets o

Global file usage

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://en.wikipedia.org/wiki/File:Split-ring_resonator_array_10K_sq_nm.jpg"