File:Rock gypsum (gyprock) (Salina Group, Upper Silurian; Ottawa County, Ohio, USA).jpg
Original file (3,086 × 1,961 pixels, file size: 2.92 MB, MIME type: image/jpeg)
This is a file from the Wikimedia Commons. Information from its description page there is shown below. Commons is a freely licensed media file repository. You can help. |
Summary
DescriptionRock gypsum (gyprock) (Salina Group, Upper Silurian; Ottawa County, Ohio, USA).jpg |
English: Rock gypsum from the Silurian of Ohio, USA. (public display, Geology Department, Wittenberg University, Springfield, Ohio, USA)
Sedimentary rocks form by the solidification of loose sediments. Loose sediments become hard rocks by the processes of deposition, burial, compaction, dewatering, and cementation. There are three categories of sedimentary rocks: 1) Siliciclastic sedimentary rocks form by the solidification of sediments produced by weathering & erosion of any previously existing rocks. 2) Biogenic sedimentary rocks form by the solidification of sediments that were once-living organisms (plants, animals, micro-organisms). 3) Chemical sedimentary rocks form by the solidification of sediments formed by inorganic chemical reactions. Most sedimentary rocks have a clastic texture, but some are crystalline. Rock gypsum (also known as gyprock) is a chemical sedimentary rock. It is an example of an evaporite - it forms by the evaporation of water (usually seawater) and the precipitation of dissolved minerals. Rock salt & rock gypsum often occur together in evaporitic successions. Rock gypsum is composed of the mineral gypsum (CaSO4·2H2O - hydrous calcium sulfate). Heating of gypsum or rock gypsum drives off the water, leaving only calcium sulfate behind (the mineral anhydrite). Adding water to anhydrite results in the formation of gypsum again. Rock gypsum, unlike rock salt, does not have a salty taste, and is softer (H = 2) - it can be scratched with a fingernail. Rock gypsum’s color is often a mottled whitish-light grayish-light brownish. It is usually microcrystalline and powdery looking (it’s much finer-grained than typical rock salt deposits). Rock gypsum superficially resembles chalk. Chalk is calcitic, and so will bubble in acid - rock gypsum does not bubble in acid. Rock gypsum samples vary from extremely friable to moderately solid. Stratigraphy: unrecorded/undisclosed, but probably from the F Unit of the Salina Group, ~mid-Upper Silurian Locality: unrecorded/undisclosed site in Ottawa County (but likely from a gypsum mine at or near the town of Gypsum), far-northern Ohio, USA For more info., see: geosurvey.ohiodnr.gov/portals/geosurvey/PDFs/Newsletter/2... |
Date | |
Source | https://www.flickr.com/photos/47445767@N05/41632221472/ |
Author | James St. John |
Licensing
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
This image was originally posted to Flickr by James St. John at https://flickr.com/photos/47445767@N05/41632221472. It was reviewed on 13 October 2020 by FlickreviewR 2 and was confirmed to be licensed under the terms of the cc-by-2.0. |
13 October 2020
Items portrayed in this file
depicts
some value
24 March 2018
0.01666666666666666666 second
11
11.614 millimetre
image/jpeg
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 02:10, 13 October 2020 | 3,086 × 1,961 (2.92 MB) | Ser Amantio di Nicolao | Uploaded a work by James St. John from https://www.flickr.com/photos/47445767@N05/41632221472/ with UploadWizard |
File usage
The following page uses this file:
Metadata
This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.
If the file has been modified from its original state, some details may not fully reflect the modified file.
Camera manufacturer | Canon |
---|---|
Camera model | Canon PowerShot D10 |
Exposure time | 1/60 sec (0.016666666666667) |
F-number | f/11 |
ISO speed rating | 80 |
Date and time of data generation | 15:42, 24 March 2018 |
Lens focal length | 11.614 mm |
Image title | |
Width | 4,000 px |
Height | 3,000 px |
Bits per component |
|
Pixel composition | RGB |
Orientation | Normal |
Number of components | 3 |
Horizontal resolution | 180 dpi |
Vertical resolution | 180 dpi |
Software used | Adobe Photoshop Elements 13.0 (Macintosh) |
File change date and time | 11:05, 24 April 2018 |
Y and C positioning | Co-sited |
Exif version | 2.21 |
Date and time of digitizing | 15:42, 24 March 2018 |
Meaning of each component |
|
Image compression mode | 3 |
Shutter speed | 5.90625 |
APEX aperture | 6.90625 |
Exposure bias | −0.66666666666667 |
Maximum land aperture | 4 APEX (f/4) |
Metering mode | Pattern |
Flash | Flash fired, compulsory flash firing, red-eye reduction mode |
Supported Flashpix version | 1 |
Color space | sRGB |
Focal plane X resolution | 16,460.905349794 |
Focal plane Y resolution | 16,483.516483516 |
Focal plane resolution unit | inches |
Sensing method | One-chip color area sensor |
File source | Digital still camera |
Custom image processing | Normal process |
Exposure mode | Manual exposure |
White balance | Auto white balance |
Digital zoom ratio | 1 |
Scene capture type | Portrait |
Lens used | 6.2-18.6 mm |
Date metadata was last modified | 07:05, 24 April 2018 |
Unique ID of original document | D3ED5AA2F1A989D57E202A3170F46935 |
IIM version | 29,735 |