File:Practical Differentiator Circuit Diagram.svg
Size of this PNG preview of this SVG file: 321 × 219 pixels. Other resolutions: 320 × 218 pixels | 640 × 437 pixels | 1,024 × 699 pixels | 1,280 × 873 pixels | 2,560 × 1,747 pixels.
Original file (SVG file, nominally 321 × 219 pixels, file size: 9 KB)
 | This is a file from the Wikimedia Commons. Information from its description page there is shown below. Commons is a freely licensed media file repository. You can help. |
Summary
| Description |
English: Practical Differentiator Circuit Diagram (Using op-amp) |
| Date | |
| Source | Own work |
| Author | Kjerish |
Licensing
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
Source
LaTeX TikZ source :
\documentclass[border=10pt]{standalone}
\usepackage{circuitikz}
\begin{document}
\begin{circuitikz}
% Input voltage node
\draw (0,1.5) node[left] {$V_i$} to[short, *-] (0.5,1.5);
% Resistor R1
\draw (0.5,1.5) to[R, l=$R_1$] (2.5,1.5);
% Capacitor C
\draw (2.5,1.5) to[C, C=$C$, -] (3,1.5);
% Operational Amplifier
\draw (5,1) node[op amp] (opamp) {};
\draw (opamp.-) -| (3,1.5);
\draw (opamp.+) to[short] ++(0,-0.5) node[ground] {};
% Feedback Resistor and Capacitor
\draw (opamp.-) to[short] (3.8,4) to[C, C=$C_1$] (6,4) to[short] (6.2,4) to[short] (opamp.out);
\draw (opamp.-) to[short] (3.8,2.5) to[R, l=$R$] (6,2.5) to[short] (6.2,2.5) to[short] (opamp.out);
%\draw (opamp.-) to[R, l=$R$] (2,3) to[short] (opamp.out);
% Output voltage node
\draw (opamp.out) to[short, -o] ++(1,0) node[right] {$V_o$};
\end{circuitikz}
\end{document}
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 16:25, 13 October 2023 | | 321 × 219 (9 KB) | Kjerish | Uploaded own work with UploadWizard |
File usage
The following page uses this file:
