English: This was taken at the base of a ventilation shaft, with the open top just out of sight. The shaft is in Melbourne, on the south side of Swan Street (Olympic Parade) just west of Gosch's Paddock. It's about half-way along the Burnley tunnel on the CityLink freeway. When this photo was taken (mid 1997), the shaft was 65 metres deep and 10 metres diameter. At the time, the shaft was being used for the construction of the Burnley tunnel instead of permanent ventilation. The two big steel circular ducts running down the sides were temporary ventilation ducts to extract foul air from the headings east and west of the shaft, and there was a crane that raised & lowered a birdcage for the tunnellers (the birdcage isn't shown, but its cable is just visible mid-field).Once the tunnelling was completed, the shaft was fitted out with the following: a 250 mm thick secondary lining to stop the weeping water; a staircase; steelwork to support a pair of fans used for air supply/smoke extract; and an Alimak hoist down to road level. If you go to the site today, all you'll see is a grey one-storey building with an external steel frame and an octagonal ventilation intake/outlet on the roof. The location of the shaft is marked on the Melways map as an escape route from the Burnley tunnel.
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
This licensing tag was added to this file as part of the GFDL licensing update.http://creativecommons.org/licenses/by-sa/3.0/CC BY-SA 3.0Creative Commons Attribution-Share Alike 3.0truetrue
Original upload log
The original description page was here. All following user names refer to en.wikipedia.