Jump to content

SS Edward L. Ryerson

Add links
Coordinates: 46°44′18″N 92°06′14″W / 46.73822°N 92.10375°W / 46.73822; -92.10375
From Wikipedia, the free encyclopedia
(Redirected from Edward L. Ryerson)

Edward L. Ryerson in 2007
History
United States
Name
  • Edward L. Ryerson (1960–1998)
  • Str. Edward L. Ryerson (1998–present)
NamesakeEdward Larned Ryerson
OwnerCentral Marine Logistics, Griffith, Indiana[2]
Port of registry Indiana Harbor, Indiana[1]
BuilderManitowoc Shipbuilding Company, Manitowoc, Wisconsin
Yard number425[3]
Laid downApril 20, 1959
LaunchedJanuary 21, 1960
Maiden voyageAugust 4, 1960
Out of service2009
Identification
Nickname(s)Fast Eddie
StatusLaid up in Superior, Wisconsin.[4] Located at 46°44′18″N 92°06′14″W / 46.73822°N 92.10375°W / 46.73822; -92.10375
General characteristics
TypeLake freighter
Tonnage
Displacement9,050 long tons (9,195 t)[1] (lightweight)
Length
Beam75 ft (23 m)
Draft26.6 ft (8.1 m)[1]
Depth39 ft (12 m)
Installed power
PropulsionSingle five bladed fixed pitch 20 ft (6.1 m) propeller
Speed19 mph (31 km/h)
Capacity26,574 long tons (29,763 short tons; 27,000 t)

SS Edward L. Ryerson is a steel-hulled American Great Lakes freighter that entered service in 1960. Built between April 1959 and January 1960 for the Inland Steel Company, she was the third of the thirteen so-called 730-class of lake freighters, each of which shared the unofficial title of "Queen of the Lakes", as a result of their record-breaking length. She was not only the last steam-powered freighter built on the lakes but also the last one that was not a self-unloader. Since 2009, she has been in long-term layup in Superior, Wisconsin. She is one of only two American-owned straight deck lake freighters, the other being John Sherwin, built in 1958.[a]

Built to transport iron ore almost exclusively, Edward L. Ryerson completed her sea trials on August 3, 1960. She then travelled to Escanaba, Michigan, where she loaded a cargo of iron ore, embarking on her maiden voyage for Indiana Harbor, Indiana, on August 4. She set a Great Lakes iron ore cargo haulage record that stood for three years on August 28, 1962, after loading 24,623 long tons (27,578 short tons; 25,018 t) of iron ore in Superior, Wisconsin. Due to her top speed of 19 mph (31 km/h), she received the nickname of "Fast Eddie". Enthusiasts consider Edward L. Ryerson to be one of the most aesthetically pleasing lake freighters ever built; she quickly became one of the most popular boats on the lakes, to the point that there were rumors that at the Soo Locks, she would regularly be directed through the lock closest to the shore, the MacArthur Lock, for the benefit of boat watchers.

As a result of a downturn in the steel industry, Edward L. Ryerson was laid up in Indiana Harbor for the 1986 and 1987 shipping seasons, returning to service in 1988. She was laid up for a second time in January 1994 in Sturgeon Bay, Wisconsin, where she remained inactive until April 1997. In 1998, Inland Steel was acquired by the Netherlands-based Ispat International N.V. The same year, Edward L. Ryerson was renamed Str. Edward L. Ryerson. She was sold to the Indiana Harbor Steamship Company later in 1998; she entered long-term layup at the Bay Shipbuilding Company in Sturgeon Bay in December the same year, returning to the lakes in 2006. In 2009, she entered long-term layup at the Fraser Shipyard in Superior, remaining stationary as of October, 2024.

History

[edit]

Design and construction

[edit]
Edward L. Ryerson being fitted out

In 1959, the Inland Steel Company of Chicago contracted H.C. Downer & Associates Incorporated of Cleveland to design a ship to be constructed by the Manitowoc Shipbuilding Company in Manitowoc, Wisconsin.[1][6] This vessel was one of the first lakers built to the maximum length allowed for passage through the St. Lawrence Seaway, which was completed in the same year as the vessel.[7][8] Her hull has an overall length of 730 feet (222.5 m) and a length between perpendiculars of 712 feet (217.0 m). She has a 75 foot (23 m) beam and a draft of 26.6 feet (8.1 m).[1][3] The depth of her hull is 39 ft (12 m).[1] She has a gross register tonnage of 12,170 tons and a net register tonnage of 7,637 tons.[3]

The first keel plate was laid on April 20, 1959.[1] Edward L. Ryerson was the third of the thirteen so-called 730-class of lake freighters built; five were American, of which she is the first.[1] With a cargo capacity of 26,574 long tons (29,763 short tons; 27,000 t), and a 730-foot (220 m) hull, Edward L. Ryerson was one of the longest ships on the Great Lakes at the time of her construction. This earned her the unofficial title of Queen of the Lakes,[9] which she shared with the other ships in her class until December 7, 1962, when the 730.2-foot (222.6 m) Frankcliffe Hall was launched.[1][10] Edward L. Ryerson's four unique vertical-sided cargo holds were loaded through 18 watertight hatches, each 20 by 54 feet (6.1 by 16.5 m). The vertical sides of the cargo holds were designed to speed up the loading and unloading process and reduce the damage caused by Hulett unloaders,[11] and the large hatches gave the operators better visibility and access to the cargo.[1][12][13] Each hatch admitted two chutes to ease the loading of ore.[13] She was the first vessel on the Great Lakes to be equipped with aluminium hatch covers.[14]

She is equipped with two 9,900 shp (7,400 kW) General Electric cross-compound steam turbines, which are powered by two 465 psi oil-burning Combustion Engineering boilers. Her boilers featured the first hydraulic combustion controls installed on an American vessel.[15] She can carry 139,128 U.S. gal (526,660 L; 115,848 imp gal) of fuel oil.[1] Propelled by a single five-bladed fixed pitch 20 ft (6.1 m) propeller—the largest propeller used on a lake freighter in 1960[16]—she had a top speed of 19 mph (31 km/h). In 1969, the installation of a diesel-powered bow thruster improved Edward L. Ryerson's maneuverability.[1]

Edward L. Ryerson's owners intended her to be as aesthetically attractive and luxurious as possible, spending a total of $8 million (equivalent to $64 million in 2023[17]) on her.[18] Her accommodations, which were the first of any ship on the Great Lakes to be fully air conditioned, can accommodate up to 37 crewmen and eight guests.[1][13][19] Boatnerd writer George Wharton described her as "the most aesthetically pleasing of all lake boats".[1] Edward L. Ryerson was equipped with a magnetic stainless steel map of the Great Lakes for the benefit of passengers, many of whom included members of Inland Steel's management and guests from other companies.[20] In her basic design and construction, Edward L. Ryerson was considered to be a larger version of Inland Steel's 1949 freighter Wilfred Sykes.[1][9] She is the last steam-powered American freighter built on the lakes, and also the last one built without a self-unloading boom. She was the last American freighter built on the lakes until Stewart J. Cort in 1972, and the last lake freighter constructed in Manitowoc.[1][3]

Name and launch

[edit]

Edward L. Ryerson was named after Inland Steel's chairman of the board, Edward Larned Ryerson. He was the president of the steel service center, Joseph T. Ryerson & Son, until 1935, when the company merged with Inland Steel. From 1940 until his retirement in 1953, Ryerson remained the chairman of the board of both companies.[1] The christening and launch ceremony of Edward L. Ryerson took place at 11:58 a.m. on January 21, 1960. Sponsored by Mrs. Edward L. Ryerson, the new vessel was launched sideways on wooden rollers into the ice-filled Manitowoc River, in front of approximately 5000 people.[1][7][11][19] The waves caused by Edward L. Ryerson sent large pieces of ice flying into the dock across the river, causing serious damage.[11] She was set to leave the shipyard through the Manitowoc River on July 28, 1960, but there were several areas of the river that she could not transit as a result of her size. Dredging was necessary at these sections, and at one point, part of the shoreline had to be dug away. The work lasted for four hours.[21] An article published in The Herald Times Reporter described moving Edward L. Ryerson "like building a cruiser in the basement and then engineering it through a door too small for its shortest dimension".[1][21] Edward L. Ryerson completed her sea trials on August 3.[1]

Career and layup

[edit]
Edward L. Ryerson on her first record setting trip

Edward L. Ryerson was designed almost exclusively for the iron ore trade.[7] After completing her sea trials, she departed Manitowoc in ballast shortly after midnight on August 4, for Escanaba, Michigan.[21] Upon arriving at Escanaba, she loaded 22,846 long tons (25,588 short tons; 23,213 t) of iron ore bound for Indiana Harbor, Indiana, where she arrived on August 6.[1][16][19] Edward L. Ryerson set Great Lakes iron ore cargo haulage records twice during the early 1960s.[1][7] Both times, she loaded iron ore in Superior, Wisconsin, and headed for Indiana Harbor, Indiana. She set the first record in 1960, when she loaded 23,009 long tons (25,770 short tons; 23,378 t) of ore.[7] While underway, she broke a stud of her stuffing box.[18] She set her second record on August 28, 1962, when she loaded 24,623 long tons (27,578 short tons; 25,018 t) of ore at the Great Northern Railway's Allouez ore docks. Her second record would be broken in 1965.[1][7][19] Due to her top speed, she received the nickname "Fast Eddie".[1] Edward L. Ryerson quickly became a favourite among boat watchers on the lakes and there were rumors she was regularly directed through the lock closest to the shore, the MacArthur Lock, for their benefit.[1][20] On board, a stainless steel map of the Great Lakes, with a magnetic representation of Edward L. Ryerson, was installed to keep the guests informed about her location.[20] In 1976, Joseph L. Block superseded Edward L. Ryerson as Inland Steel's largest vessel.[20]

Photograph of Edward L. Ryerson in the Tower Slip
Edward L. Ryerson laid up in the Tower Slip

As a result of a downturn in the steel industry, Edward L. Ryerson was laid up in Indiana Harbor from the end of 1985 to the beginning of 1988, when she returned to service.[1][20] On July 18, 1992, Edward L. Ryerson loaded the first ever cargo of iron ore pellets to leave Escanaba.[22] She once again entered layup on January 24, 1994, in Sturgeon Bay, Wisconsin, remaining inactive until 1996, returning to service on April 5, 1997.[1][23] In 1998, the Netherlands-based Ispat International N.V. acquired Inland Steel, at which time Edward L. Ryerson was renamed Str. Edward L. Ryerson.[1] She was sold to the Indiana Harbor Steamship Company, which was managed by Central Marine Logistics of Griffith, Indiana,[1][2] later in 1998, entering long-term layup at the Bay Shipbuilding Company in Sturgeon Bay on December 12.[1] Throughout the 1998 shipping season, Edward L. Ryerson carried 1,476,310 long tons (1,653,467 short tons; 1,500,000 t) of iron ore from Escanaba over the course of 55 visits.[24] As part of her layup, she was moved to Sturgeon Bay's east dock on December 7, 2000, and back to Bay Shipbuilding on August 17, 2004.[1] Edward L. Ryerson re-entered service on June 3, 2006, departing Sturgeon Bay for Escanaba on July 22, 2006, where she loaded 25,227 long tons (28,254 short tons; 25,632 t) of iron ore bound for Indiana Harbor.[1] She entered layup in 2009, at the Fraser Shipyard in Superior, Wisconsin.[3] In 2013, she was moved to the Tower Slip, near Barko Hydraulics due to of soil testing at the Fraser Shipyards. She was moved into the Cumming Slip in 2019, by reason of soil testing at the Tower Slip.[4] Edward L. Ryerson is one of only two American-owned straight deck lake freighters, the other one being the 1958-built freighter John Sherwin.[1][a]

In their port report from February 7, 2023, Boatnerd reported that Edward L. Ryerson's automatic identification system (AIS) was reactivated for the first time since 2009. Her future, and whether or not she will return to service remains uncertain. In the same report, they further reported that indeterminate work was being carried out on Edward L. Ryerson, despite her owners not making any long-term plans for her future.[25]

See also

[edit]

Notes

[edit]
  1. ^ a b In this context, "straight deck" indicates that Edward L. Ryerson is unequipped with a self unloading boom.[5]

References

[edit]
  1. ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag Wharton (2008).
  2. ^ a b Central Marine Logistics (2010).
  3. ^ a b c d e f g Bowling Green State University (2010).
  4. ^ a b Erickson (2019).
  5. ^ Thompson (1991), p. 198.
  6. ^ Small Business Administration (1963), p. 634.
  7. ^ a b c d e f Bawal (2009), p. 75.
  8. ^ Thompson (1994), pp. 163–171.
  9. ^ a b Thompson (1994), p. 171.
  10. ^ Thompson (1994), p. 178.
  11. ^ a b c Yuenger (1960), p. 7.
  12. ^ Great Lakes Maritime Institute (1995), p. 115.
  13. ^ a b c The Daily Calumet (1960), p. 3.
  14. ^ National Park Service (1987), p. 16.
  15. ^ The Times of Northwest Indiana (1) (1960), p. 10.
  16. ^ a b Great Lakes Maritime Institute (1995), p. 116.
  17. ^ Johnston, Louis; Williamson, Samuel H. (2023). "What Was the U.S. GDP Then?". MeasuringWorth. Retrieved November 30, 2023. United States Gross Domestic Product deflator figures follow the MeasuringWorth series.
  18. ^ a b The Times of Northwest Indiana (2) (1960), p. 10.
  19. ^ a b c d Manitowoc County Historical Society (2020).
  20. ^ a b c d e Bawal (2009), p. 77.
  21. ^ a b c Shedal (2020).
  22. ^ Bawal (2009), p. 79.
  23. ^ Burdick (1997), p. 87.
  24. ^ Burdick (1999), p. 87.
  25. ^ Boatnerd (2023).

Sources

[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=SS_Edward_L._Ryerson&oldid=1257875340"