IEC Common Data Dictionary

IEC Common Data Dictionary (abbreviated: IEC CDD) is a metadata registry providing product classification and formalized product descriptions that can be used in the context of smart manufacturing and Industrie 4.0.

Data Model

IEC CDD is based on the data model defined in IEC 61360-2/ISO 13584–42 with an enhancement of its modelling capability adopted from IEC 62656-1. The description of the data model for dictionary developers in particular for those in electrotechnical domains is given in IEC 61360-1. Currently the scope of the registry is extended to cover all ISO and IEC domains, thus it is no longer "IEC CDD", nevertheless it is hosted by IEC-CO and is maintained by IEC SC 3D with a joint working group formed between IEC SC 3D and ISO TC 184/SC4. The data model of the CDD references ISO/IEC 11179 for the identification of the registered elements . It is used to host product classifications. - This means the IEC CDD is a database providing classifications and metadata definitions for describing products. The IEC CDD is an International Standard in the form of an online database, not in the form of (e-)paper, and is given the standard number IEC 61360-4 DB. Thus the metadata registered into the database has the status of International Standard. The procedure to add a new definition or a set of definitions is based on the IEC database procedure, described in Annex SL of the IEC supplementary of the ISO/IEC directive Part 1. This process for updating the content is called a "Change Request" and when a Change Request is issued and adopted, the proposed item will become part of the International Standard, IEC 61360-4 DB, within approximately 6 months.

Use

IEC CDD originally was intended to support electronic exchange of digital information (e.g. for e-commerce ^[1]).

The exchanged information is based on concepts, which are standardized as a common basis.

New information concepts related to smart manufacturing and Industrie 4.0 are based on use of IEC CDD and similar dictionaries. The intention for these use cases is to provide the meaning of data values by referencing the data definitions in the dictionaries. Such annotated data values then can be exchanged within one production system between machines of different manufacturers or between different companies.^[2]

Scope

The data specification for IEC CDD is provided by IEC 61360. This means IEC CDD stores concepts which are based on IEC 61360, such as

Uniquely identified classes and properties, and their relations;
Uniquely identified values and value lists;
terminology and definitions based on accepted international standards;
technical representation of concepts including units and data types and their identification.^[3]

The representation of a product and its features is based on a hierarchy of classes. The characteristics of the product are represented with help of the property definitions related to the classes. Such property definitions may be based on general datatypes or based on specific values and value lists (e.g. for defining a supported range). Each class and each property may be defined with name and textual descriptions in multiple languages.

Such a definition for a property representation can be used as base for product descriptions in e-catalogues or for B2B communications (see B2B e-commerce).^[4]

Content

The IEC CDD hosts different product classifications (based on international standards) for

process automation equipment (based on IEC 61987),
low voltage switchgear and controlgear (based on IEC 62683),
electro-electronic components (provided by IEC TC47),
optics (based on ISO 23584, test^{[note 1]}),
measuring instruments (based on IEC ISO 13584-501, test^{[note 1]}),
environmental declaration (based on IEC 60721, test^{[note 1]}).^[1]^[5]

The IEC CDD is organized into different domains, each domain providing one of these product classifications. Each of these domains can be accessed directly using the HTML user interface of IEC CDD.

The IEC CDD also hosts UNITS for MEASUREMENT (based on IEC 62720). These units are hosted in a domain which cannot be accessed directly by the HTML user interface, but which can be referenced by the product classifications listed above (for example it is referenced by the product classification for electro-electronic components).

Procedure to introduce new information into IEC CDD

The procedure to integrate new concepts is defined by "ISO/IEC directives supplement – Procedures specific to IEC",^[6] Annex SL. In order to provide new content or improvement of the content of IEC CDD, a Change Request (CR) may be submitted to IEC SC3D. The CR is reviewed by SC3D experts for syntactic correctness and completeness. After that, during Evaluation stage the CR will be checked for correctness of formal definitions according to the definition rules as defined by ISO/IEC directives Part 2,^[7] as well as syntactic and semantic consistency. After these checks the CR is voted to reach Validation stage.^[8]

Notes

^ ^a ^b ^c Ontologies marked with 'test' have restricted access only.

References

^ ^a ^b Juhel, P. (21 September 2017). "eCl@ss references to product standards requirements: IEC 62683 approach" (PDF). 6. eCl@ss Kongress 2017. Retrieved 29 January 2018.
^ "Examples of the Asset Administration Shell for Industrie 4.0 Components – Basic Part" (PDF). ZVEI. April 2017. Retrieved 26 September 2018.
^ "IEC CDD". IEC Common Data Dictionary. IEC. Retrieved 29 January 2018.
^ Morand, Fachot (2015). "Common Data Dictionary helps drive business forwards". eTech. Retrieved 20 October 2018.
^ Murayama, H.; Wang, L.; Hosokawa, A. "Building a bridge between CIM and PLIB ontologies via IEC62656 on data parcels" (PDF). Grid-Interop Forum 2010 (Nov 30 - Dec 3, 2010). Retrieved 22 November 2013.
^ ISO/IEC Directives Part 1 with IEC Supplement - Procedures for the technical work – Procedures specific to IEC (PDF). ISO/IEC. 2016. Retrieved 29 January 2018.
^ ISO/IEC Directives Part 2 - Principles and rules for the structure and drafting of ISO and IEC documents (PDF). ISO/IEC. 2016.
^ Nicolais, L.; Moreno, A. (2014). Interoperability for digital engineering systems. Milano: Angeli.

External links

International Electrotechnical Commission IEC 61360-4 - Common Data Dictionary (IEC CDD)

[Note1-5] Ontologies marked with 'test' have restricted access only.

[juhel-1] Juhel, P. (21 September 2017). "eCl@ss references to product standards requirements: IEC 62683 approach" (PDF). 6. eCl@ss Kongress 2017. Retrieved 29 January 2018.

[2] "Examples of the Asset Administration Shell for Industrie 4.0 Components – Basic Part" (PDF). ZVEI. April 2017. Retrieved 26 September 2018.

[3] "IEC CDD". IEC Common Data Dictionary. IEC. Retrieved 29 January 2018.

[4] Morand, Fachot (2015). "Common Data Dictionary helps drive business forwards". eTech. Retrieved 20 October 2018.

[mwh-6] Murayama, H.; Wang, L.; Hosokawa, A. "Building a bridge between CIM and PLIB ontologies via IEC62656 on data parcels" (PDF). Grid-Interop Forum 2010 (Nov 30 - Dec 3, 2010). Retrieved 22 November 2013.

[7] ISO/IEC Directives Part 1 with IEC Supplement - Procedures for the technical work – Procedures specific to IEC (PDF). ISO/IEC. 2016. Retrieved 29 January 2018.

[8] ISO/IEC Directives Part 2 - Principles and rules for the structure and drafting of ISO and IEC documents (PDF). ISO/IEC. 2016.

[9] Nicolais, L.; Moreno, A. (2014). Interoperability for digital engineering systems. Milano: Angeli.

[1]

[2]

[3]

[4]

[note 1]

[5]

[6]

[7]

[8]