Jump to content

Tower array

From Wikipedia, the free encyclopedia
(Redirected from Directional broadcasting)

A tower array is an arrangement of multiple radio towers which are mast radiators in a phased array.[1] They were originally developed as ground-based tracking radars.[2] Tower arrays can consist of free-standing or guyed towers or a mix of them. Tower arrays are used to constitute a directional antenna of a mediumwave or longwave radio station.

The number of towers in a tower array can vary. In many arrays all towers have the same height, but there are also arrays of towers of different height.[3] The arrangement can vary. For directional antennas with fixed radiation pattern, linear arrangements are preferred, while for switchable directional patterns (usually for daytime groundwave versus nighttime skywave), square arrangements are chosen.[4]

Examples

[edit]

Tower arrays with guyed masts

[edit]

Tower arrays with free-standing towers

[edit]

See also

[edit]

References

[edit]
  1. ^ Jacoby Barrera (2019). Broadcasting Journalism. EDTECH. pp. 129–132. ISBN 9781839472893.
  2. ^ John S. Seybold (2005). Introduction to RF Propagation. Wiley. p. 54. ISBN 9780471743682.
  3. ^ Graham A. Jones; David H. Layer; Thomas G. Osenkowsky; Edmund A. Williams (2013). National Association of Broadcasters Engineering Handbook: NAB Engineering Handbook. Taylor & Francis. p. 759. ISBN 9781136034107.
  4. ^ B. Whitfield Griffith (2000). Radio-electronic Transmission Fundamentals. Noble Publishing Corporation. pp. 411–419. ISBN 9781884932137.