Jump to content

Cylinder blown sheet glass

From Wikipedia, the free encyclopedia
(Redirected from Cylinder method)
man cutting off the end of the glass cylinder and then slicing it lengthwise
Cutter removing ends of cylinder and slicing the tube lengthwise
man flattening cylinder in an oven
Sliced tube of glass is flattened in an oven

Cylinder blown sheet is a type of hand-blown window glass. It is created with a similar process to broad sheet, but with the use of larger cylinders. In this manufacturing process glass is blown into a cylindrical shape by a glass blower. The ends of the cylinder are cut off and a cut is made down the side of the cylinder. The cut cylinder is then placed in an oven where the cylinder unrolls into a flat glass sheet. Blenko Glass Company used this method to make flat glass during the 20th century, but it used a process patented by William Blenko that used molds for the cylinder to enable consistency in the size of the glass. In Blenko's case, slight imperfections were desired for the purpose of giving the flat glass the appearance of antique glass.[1]

The standard (non-Blenko) cylinder method caused surface damages on the glass due to the flattening and moving, and the sheet therefore had to be ground and polished. In 1839 the Chance Brothers invented the patent plate process where the glass plate was placed on a wet piece of leather and ground and polished to remove all the surface damage.[2]

Other methods of producing hand-blown window glass included broad sheet, blown plate, crown glass and polished plate. These methods of manufacture lasted at least until the end of the 19th century. The early 20th century marks the move away from hand-blown to machine manufactured glass such as rolled plate, machine drawn cylinder sheet, the Fourcault process of flat drawn sheet, single and twin ground polished plate and most common, float glass.

Cylinder blown sheet glass was manufactured in the UK in the mid 19th century. It had been manufactured in France and Germany (and imported to the UK) since the 18th century.

Notes

[edit]

Footnotes

[edit]

Citations

[edit]
  1. ^ U.S. patent 1,583,441, William Blenko, "Art Glass and Method of Making the Same", issued May 4, 1926 
  2. ^ Contribution of the glass cladding to the overall structural behaviour of 19th-century iron and glass roofs

References

[edit]
  • "Hand-blown glass: manufacturing process". London Crown Glass Company. Archived from the original on November 6, 2005. Retrieved December 30, 2005.