Jump to content

Cable-stayed bridge

From Wikipedia, the free encyclopedia
(Redirected from Cable stay bridge)

Cable-stayed bridge
The Russky Bridge in Vladivostok has a central span of 1,104 metres (3,622 ft), the world's longest cable-stayed bridge span as of 2024.
The Russky Bridge in Vladivostok has a central span of 1,104 metres (3,622 ft), the world's longest cable-stayed bridge span as of 2024.
AncestorSuspension bridge
RelatedExtradosed bridge
DescendantSide-spar cable-stayed bridge, Self-anchored suspension bridge, cantilever spar cable-stayed bridge
CarriesPedestrians, bicycles, automobiles, trucks, light rail
Span rangeMedium to Long
MaterialSteel rope, post-tensioned concrete box girders, steel or concrete pylons
MovableNo[citation needed]
Design effortmedium
Falsework requiredNormally none
Øresund Bridge from Malmö to Copenhagen in Sweden and Denmark

A cable-stayed bridge has one or more towers (or pylons), from which cables support the bridge deck. A distinctive feature are the cables or stays, which run directly from the tower to the deck, normally forming a fan-like pattern or a series of parallel lines. This is in contrast to the modern suspension bridge, where the cables supporting the deck are suspended vertically from the main cable, anchored at both ends of the bridge and running between the towers. The cable-stayed bridge is optimal for spans longer than cantilever bridges and shorter than suspension bridges. This is the range within which cantilever bridges would rapidly grow heavier, and suspension bridge cabling would be more costly.

Cable-stayed bridges were being designed and constructed by the late 16th century,[1] and the form found wide use in the late 19th century. Early examples, including the Brooklyn Bridge, often combined features from both the cable-stayed and suspension designs. Cable-stayed designs fell from favor in the early 20th century as larger gaps were bridged using pure suspension designs, and shorter ones using various systems built of reinforced concrete. It returned to prominence in the later 20th century when the combination of new materials, larger construction machinery, and the need to replace older bridges all lowered the relative price of these designs.[2]

History

[edit]
Chain-stayed bridge by the Renaissance polymath Fausto Veranzio, from 1595/1616. Prior to industrial manufacture of heavy wire rope (steel cable), suspended or stayed bridges were firstly constructed with linked rods (chain).

Cable-stayed bridges date back to 1595, where designs were found in Machinae Novae, a book by Croatian-Venetian inventor Fausto Veranzio. Many early suspension bridges were cable-stayed construction, including the 1817 footbridge Dryburgh Abbey Bridge, James Dredge's patented Victoria Bridge, Bath (1836), and the later Albert Bridge (1872) and Brooklyn Bridge (1883). Their designers found that the combination of technologies created a stiffer bridge. John A. Roebling took particular advantage of this to limit deformations due to railway loads in the Niagara Falls Suspension Bridge.

The earliest known surviving example of a true cable-stayed bridge in the United States is E.E. Runyon's largely intact steel or iron Bluff Dale Suspension bridge with wooden stringers and decking in Bluff Dale, Texas (1890), or his weeks earlier but ruined Barton Creek Bridge between Huckabay, Texas and Gordon, Texas (1889 or 1890).[3][4] In the twentieth century, early examples of cable-stayed bridges included A. Gisclard's unusual Cassagnes bridge (1899),[5] in which the horizontal part of the cable forces is balanced by a separate horizontal tie cable, preventing significant compression in the deck, and G. Leinekugel le Coq's bridge[6] at Lézardrieux in Brittany (1924). Eduardo Torroja designed a cable-stayed aqueduct[7] at Tempul in 1926.[8] Albert Caquot's 1952 concrete-decked cable-stayed bridge[9] over the Donzère-Mondragon canal at Pierrelatte is one of the first of the modern type, but had little influence on later development.[8] The steel-decked Strömsund Bridge designed by Franz Dischinger (1955) is, therefore, more often cited as the first modern cable-stayed bridge.

Abdoun Bridge, Amman, Jordan, example of an extradosed bridge

Other key pioneers included Fabrizio de Miranda, Riccardo Morandi, and Fritz Leonhardt. Early bridges from this period used very few stay cables, as in the Theodor Heuss Bridge (1958). However, this involves substantial erection costs, and more modern structures tend to use many more cables to ensure greater economy.

Comparison with suspension bridge

[edit]
Ada Bridge at dusk in Belgrade (Serbia)
Prins Clausbrug across the Amsterdam-Rhine Canal in Utrecht

Cable-stayed bridges may appear to be similar to suspension bridges, but they are quite different in principle and construction. In suspension bridges, large main cables (normally two) hang between the towers and are anchored at each end to the ground. This can be difficult to implement when ground conditions are poor. The main cables, which are free to move on bearings in the towers, bear the load of the bridge deck. Before the deck is installed, the cables are under tension from their own weight. Along the main cables smaller cables or rods connect to the bridge deck, which is lifted in sections. As this is done, the tension in the cables increases, as it does with the live load of traffic crossing the bridge. The tension on the main cables is transferred to the ground at the anchorages and by downwards compression on the towers.

  • Difference between types of bridges
  • Suspension bridge
    Suspension bridge
  • Cable-stayed bridge, fan design
    Cable-stayed bridge, fan design

In cable-stayed bridges, the towers are the primary load-bearing structures that transmit the bridge loads to the ground. A cantilever approach is often used to support the bridge deck near the towers, but lengths further from them are supported by cables running directly to the towers. That has the disadvantage, unlike for the suspension bridge, that the cables pull to the sides as opposed to directly up, which requires the bridge deck to be stronger to resist the resulting horizontal compression loads, but it has the advantage of not requiring firm anchorages to resist the horizontal pull of the main cables of the suspension bridge. By design, all static horizontal forces of the cable-stayed bridge are balanced so that the supporting towers do not tend to tilt or slide and so must only resist horizontal forces from the live loads.

The following are key advantages of the cable-stayed form:

  • much greater stiffness than the suspension bridge, so that deformations of the deck under live loads are reduced
  • can be constructed by cantilevering out from the tower – the cables act both as temporary and permanent supports to the bridge deck
  • for a symmetrical bridge (in which the spans on either side of the tower are the same), the horizontal forces balance and large ground anchorages are not required

Designs

[edit]

There are four major classes of rigging on cable-stayed bridges: mono, harp, fan, and star.[10]

  • The mono design uses a single cable from its towers and is one of the lesser-used examples of the class.
  • In the harp or parallel design, the cables are nearly parallel so that the height of their attachment to the tower is proportional to the distance from the tower to their mounting on the deck.
  • In the fan design, the cables all connect to or pass over the top of the towers. The fan design is structurally superior with a minimum moment applied to the towers, but, for practical reasons, the modified fan (also called the semi-fan) is preferred, especially where many cables are necessary. In the modified fan arrangement, the cables terminate near the top of the tower but are spaced from each other sufficiently to allow better termination, improved environmental protection, and good access to individual cables for maintenance.[11]
  • In the star design, another relatively rare design, the cables are spaced apart on the tower, like the harp design, but connect to one point or a number of closely spaced points on the deck.[12]
  • Difference between types of bridges
  • Mono design
    Mono design
  • Harp design
    Harp design
  • Fan design
    Fan design
  • Star design
    Star design
All the seven column arrangements of a cable-stayed bridge

There are also seven main arrangements for support columns: single, double, portal, A-shaped, H-shaped, inverted Y and M-shaped. The last three are hybrid arrangements that combine two arrangements into one.[10]

Depending on the design, the columns may be vertical or angled or curved relative to the bridge deck.

Variations

[edit]

Side-spar cable-stayed bridge

[edit]
Puente de la Unidad, joining San Pedro Garza García and Monterrey, a Cantilever spar cable-stayed bridge

A side-spar cable-stayed bridge uses a central tower supported only on one side. This design allows the construction of a curved bridge.

Cantilever spar cable-stayed bridge

[edit]

Far more radical in its structure, the Puente del Alamillo (1992) uses a single cantilever spar on one side of the span, with cables on one side only to support the bridge deck. Unlike other cable-stayed types, this bridge exerts considerable overturning force upon its foundation and the spar must resist the bending caused by the cables, as the cable forces are not balanced by opposing cables. The spar of this particular bridge forms the gnomon of a large garden sundial. Related bridges by the architect Santiago Calatrava include the Puente de la Mujer (2001), Sundial Bridge (2004), Chords Bridge (2008), and Assut de l'Or Bridge (2008).

Multiple-span cable-stayed bridge

[edit]
Zhivopisny Bridge in Moscow is a multiple-span design.

Cable-stayed bridges with more than three spans involve significantly more challenging designs than do 2-span or 3-span structures.

In a 2-span or 3-span cable-stayed bridge, the loads from the main spans are normally anchored back near the end abutments by stays in the end spans. For more spans, this is not the case and the bridge structure is less stiff overall. This can create difficulties in both the design of the deck and the pylons. Examples of multiple-span structures in which this is the case include Ting Kau Bridge, where additional 'cross-bracing' stays are used to stabilise the pylons; Millau Viaduct and Mezcala Bridge, where twin-legged towers are used; and General Rafael Urdaneta Bridge, where very stiff multi-legged frame towers were adopted. A similar situation with a suspension bridge is found at both the Great Seto Bridge and San Francisco–Oakland Bay Bridge where additional anchorage piers are required after every set of three suspension spans – this solution can also be adapted for cable-stayed bridges.[13]

Extradosed bridge

[edit]
The Twinkle-Kisogawa is an extradosed design, with long gaps between the cable supported sections.

An extradosed bridge is a cable-stayed bridge with a more substantial bridge deck that, being stiffer and stronger, allows the cables to be omitted close to the tower and for the towers to be lower in proportion to the span. The first extradosed bridges were the Ganter Bridge and Sunniberg Bridge in Switzerland. The first extradosed bridge in the United States, the Pearl Harbor Memorial Bridge was built to carry I-95 across the Quinnipiac River in New Haven, Connecticut, opening in June 2012.

Cable-stayed cradle-system bridge

[edit]

A cradle system carries the strands within the stays from the bridge deck to bridge deck, as a continuous element, eliminating anchorages in the pylons. Each epoxy-coated steel strand is carried inside the cradle in a one-inch (2.54 cm) steel tube. Each strand acts independently, allowing for removal, inspection, and replacement of individual strands. The first two such bridges are the Penobscot Narrows Bridge, completed in 2006, and the Veterans' Glass City Skyway, completed in 2007.[14]

[edit]

Self-anchored suspension bridge

[edit]

A self-anchored suspension bridge has some similarity in principle to the cable-stayed type in that tension forces that prevent the deck from dropping are converted into compression forces vertically in the tower and horizontally along the deck structure. It is also related to the suspension bridge in having arcuate main cables with suspender cables, although the self-anchored type lacks the heavy cable anchorages of the ordinary suspension bridge. Unlike either a cable-stayed bridge or a suspension bridge, the self-anchored suspension bridge must be supported by falsework during construction and so it is more expensive to construct.

Notable cable-stayed bridges

[edit]
See also: List of longest cable-stayed bridge spans and Category:Cable-stayed bridges
Erasmus Bridge, Erasmusbrug, in Rotterdam, Netherlands
  • Erasmus Bridge crosses the Nieuwe Maas in Rotterdam, Netherlands. The southern span of the bridge has an 89 metres (292 ft) bascule bridge for ships that cannot pass under the bridge. The bascule bridge is the largest and heaviest in West Europe and has the largest panel of its type in the world.
A view of the Golden Horn Metro Bridge, with the Galata Tower at the left end of the frame, Istanbul, Turkey
Margaret Hunt Hill Bridge over the Trinity River in Dallas, Texas, U.S. (2012)
  • Margaret Hunt Hill Bridge in Dallas, Texas, U.S., which opened in 2012 and spans the Trinity River. In 2012, the bridge received an Outstanding Civil Engineering Achievement Award from the Texas section of the American Society of Civil Engineers.[19][20] The bridge also received a 2012 European Convention for Constructional Steelwork Award For Steel Bridges.[21]
  • Millau Viaduct, the bridge with the tallest piers in the world: 341 metres (1,119 ft) tall and roadway 266 metres (873 ft) high, spanning the river Tarn in France. With a total length of 2,460 metres (8,070 ft) and seven towers, it also has the longest cable-stayed suspended deck in the world.
Most SNP (Bridge of the Slovak National Uprising) – the world's longest cable-stayed bridge to have one pylon and one cable-stayed plane (Bratislava, Slovakia, 1967–1972)
  • Most SNP (Nový most), the world's longest cable-stayed bridge in category with one pylon and with one cable-stayed plane, spanning the Danube in Bratislava, Slovakia. The main span is 303 metres (994 ft), total length 430.8 metres (1,413 ft). The only member of World Federation of Great Towers that is primarily used as a bridge. It houses a flying-saucer restaurant at the top of pylon 85 metres (279 ft) tall.
  • Octavio Frias de Oliveira bridge crosses the Pinheiros River in São Paulo, 2008. It has a 138 metres (453 ft)-high pylon under which two stayed roads cross each other turning 90° to the opposite bank of the river.
  • Oresund Bridge, a combined two-track rail and four-lane road bridge with a main span of 490 metres (1,610 ft) and a total length of 7.85 kilometres (4.88 mi), crossing the Öresund between Malmö, Sweden, and the Danish Capital Region.
Pelješac Bridge connects the southeastern Croatian exclave to the rest of the country.
  • Pelješac Bridge, Dubrovnik-Neretva County, Croatia. It is a 2,404 metres (7,887 ft) long and 98 metres (322 ft) tall road bridge that connects the southeastern semi-exclave to the rest of the country, spanning the sea channel between Komarna and Pelješac.
  • Penobscot Narrows Bridge and Observatory, a road bridge with an observatory at the top of one of the towers, and a span of 2,120 feet (646 m).
  • Ponte Morandi, part of which collapsed during a rainstorm on 14 August 2018
  • Pont de Normandie, crosses the Seine in Normandy, France (1988–1995) – briefly the world's longest cable-stayed bridge.
  • Queensferry Crossing (formerly the Forth Replacement Crossing) is a road bridge in Scotland. It is built alongside the existing, suspension, Forth Road Bridge across the Firth of Forth and upon completion in 2017 became the longest triple-tower cable-stayed bridge in the world at 2700m.[22]
  • Pont de Brotonne, first modern cable-stayed bridge of that type, opened to traffic in 1977.[citation needed]
  • Rande Bridge in Spain near Vigo is the highway cable-stayed bridge with the longest and slenderest span in the world at the time of construction (1973–1977). Three long spans of 148 metres (486 ft) + 400 metres (1,300 ft) + 148 metres (486 ft). Pylons in concrete, girder in steel.
  • Rio-Antirio bridge crosses the Gulf of Corinth near Patras, Greece. At a total length of 2,880 metres (9,450 ft) and four towers, it has the second longest cable-stayed suspended deck (2,258 metres (7,408 ft) long) in the world, with only the deck of the Millau Viaduct in southern France being longer at 2,460 metres (8,070 ft). However, as the latter is also supported by bearings at the pylons apart from cable stays, the Rio–Antirrio bridge deck might be considered the longest cable-stayed fully suspended deck in the world.
Rio–Antirrio bridge that crosses the Gulf of Corinth near Patras, linking the town of Rio on the Peloponnese peninsula to Antirrio on mainland Greece by road.
Rio Negro Bridge, at 3,595 metres (11,795 ft), is the longest cable-stayed bridge in Brazil.[15]

See also

[edit]

References

[edit]
  1. ^ "Types of Bridges". History of Bridges. Retrieved 12 October 2020.
  2. ^ Nordrum, Amy. "Popular Cable-Stay Bridges Rise Across U.S. to Replace Crumbling Spans". Scientific American. Retrieved 30 April 2017.
  3. ^ "Bluff Dale Suspension Bridge". Historic American Engineering Record. Library of Congress.
  4. ^ "Barton Creek Bridge". Historic American Engineering Record. Library of Congress.
  5. ^ 42°30′14″N 2°08′37″E / 42.5040°N 2.1436°E / 42.5040; 2.1436
  6. ^ 48°46′51″N 3°06′24″W / 48.7807°N 3.1065345°W / 48.7807; -3.1065345
  7. ^ 36°38′56″N 5°55′49″W / 36.64876°N 5.9304°W / 36.64876; -5.9304
  8. ^ a b Troyano, Leonardo (2003). Bridge Engineering: A Global Perspective. Thomas Telford. pp. 650–652. ISBN 0-7277-3215-3.
  9. ^ 44°22′57″N 4°43′42″E / 44.3824°N 4.7284°E / 44.3824; 4.7284
  10. ^ a b "Cable Stayed Bridge". Middle East Economic Engineering Forum. Archived from the original on 25 May 2019. Retrieved 13 May 2016.
  11. ^ Sarhang Zadeh, Olfat (October 2012). "Comparison Between Three Types of Cable Stayed Bridges Using Structural Optimization" (PDF). Western University Canada.
  12. ^ T.K. Bandyopadhyay; Alok Baishya (2000). P. Dayaratnam; G.P. Garg; G.V. Ratnam; R.N. Raghavan (eds.). International Conference on Suspension, Cable Supported, and Cable Stayed Bridges: November 19–21, 1999, Hyderabad. Universities Press (India). pp. 282, 373. ISBN 978-81-7371-271-5.
  13. ^ Virlogeux, Michel (1 February 2001). "Bridges with multiple cable-stayed spans". Structural Engineering International. 11 (1): 61–82. doi:10.2749/101686601780324250. S2CID 109604691.
  14. ^ "Bridging To The Future Of Engineering" (Press release). American Society of Civil Engineers. 12 March 2007. Archived from the original on 10 October 2008. Retrieved 8 March 2008.
  15. ^ a b "First Amazon bridge to open world's greatest rainforest to development". The Guardian. 5 August 2010. Retrieved 19 January 2020.
  16. ^ "Rio Negro Bridge, $400-Million Economic Link, Opens in Amazon Basin". www.enr.com. Retrieved 7 December 2021.
  17. ^ "United States: The longest cable-stayed bridge in the West". 14 August 2015.
  18. ^ Paybarah, Azi; Schweber, Nate (29 August 2019). "The City's Most Hated Bridge Gets a Nearly $1 Billion Makeover". The New York Times. ISSN 0362-4331. Retrieved 29 August 2019.
  19. ^ "Margaret Hunt Hill Bridge, 2012 OCEA". Texas Section-American Society of Civil Engineers. Archived from the original on 5 January 2017. Retrieved 5 January 2017.
  20. ^ "Outstanding Civil Engineering Achievement Awards". Texas Section-American Society of Civil Engineers. Archived from the original on 18 February 2016. Retrieved 5 January 2017.
  21. ^ "Margaret Hunt Bridge, Dallas, USA". 2012 ECCS Award For Steel Bridges. Brussels, Belgium: European Convention for Constructional Steelwork. pp. 4–7. Archived from the original on 5 January 2017. Retrieved 5 January 2017.
  22. ^ "Queensferry Crossing | the Forth Bridges".
  23. ^ "Cable Stays: Second Severn Crossing" (PDF). Freyssinet.

Further reading

[edit]
  • De Miranda F., et al., (1979), "Basic problems in long span cable stayed bridges", Rep. n. 25, Dipartimento di Strutture – Università di Calabria – Arcavacata (CS) Italy, (242 pagg.) September 1979.
  • Gregory, Frank Hutson; Freeman, Ralph Anthony (1987). The Bangkok Cable Stayed Bridge. 3 F Engineering Consultants, Bangkok. ISBN 974-410-097-4.
  • Podolny, Walter; Scalzi, John B. (1986). Construction and design of cable-stayed bridges (2nd ed.). New York: Wiley. ISBN 0471826553.*
  • Walther, Rene; et al. (1999). Cable Stayed Bridges (2nd ed.). Thomas Telford. ISBN 0-7277-2773-7.
[edit]
Wikimedia Commons has media related to Cable-stayed bridges.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Cable-stayed_bridge&oldid=1256444038"