Jump to content

Buick Park Avenue

From Wikipedia, the free encyclopedia
(Redirected from Buick Park Avenue Essence)
Buick Park Avenue
Overview
ManufacturerBuick (General Motors 1991-2005)
SAIC-GM (2007-2012)
Production1990–2005 (U.S.)
2007–2012 (China)
Model years1991–2005 (U.S.)
2007–2012 (China)
Body and chassis
ClassFull-size car
Body style4-door sedan
LayoutTransverse front-engine, front-wheel drive (1991–2005)
FR layout (2007–2012)
Chronology
PredecessorBuick Electra
Buick Royaum (China)
SuccessorBuick Lucerne

The Buick Park Avenue is a full-size car built by Buick. The nameplate was first used in 1975 for an appearance option package on the Electra 225 Limited. It became an Electra trim level in 1978 and its own model starting in the 1991 model year after the Electra was discontinued.

There were two generations of the Park Avenue that were manufactured in the United States until 2005. In 2007, the nameplate was revived on a large Buick sedan built by Shanghai GM for the Chinese market based on the Holden Caprice from the WM/WN range. The nameplate is derived from the affluent New York City boulevard, Park Avenue.

Electra Park Avenue (1975–1990)

[edit]

1975-1976

Park Avenue first appeared as an appearance package on the 1975 Buick Electra Limited. It included similar seats to the Cadillac Sixty Special, optional full center console, Buick 455ci V8, posi-traction, 15-inch rallye sport wheels, rear automatic leveling, optional leather, optional Air Cushion Restraint System, remote mirror with thermometer, and automatic climate control. The 1976 cars were largely the same except for some styling revisions and added emissions systems.[1][2] [3][4]

1977-1984

Park Avenue, previously an appearance option package, became an official trim level on the Electra in 1978. Cosmetically, a different grille and redesigned tail lights were the only notable cosmetic changes that year but 1979 brought a redesigned, flat front end and a subtly different taillight treatment featuring a Buick crest and bisecting horizontal silver line. A more extensive redesign occurred for the 1980 model year.[5][6][7][8]

1985-1990

Park Avenue remained the top trim on the Buick Electra, it was redesigned along with the rest of the Electra line, moving to the heavily downsized front wheel drive GM C-Body. It featured a Buick 3800 V6.[9][10][11] The coupe version was discontinued in 1987. For 1989, Buick introduced the Park Avenue Ultra trim level. The Ultra was an upgrade to the Electra Park Avenue trim and featured a standard leather interior with dual 20-way power front seats designed and manufactured by Lear Siegler and styled by Giorgetto Giugiaro of Italdesign; lower-body accent exterior paint treatment; distinctive thick-padded french-seamed vinyl top with limousine-style rear-window surround (available only on Ultra); simulated burled elm trim on the doors and instrument panel; unique aluminum wheels; anti-lock brakes; chromed B-pillar moldings; specific grille and tail lamps; leather-wrapped steering wheel; electronic instrumentation; padded glove-compartment door and unique interior door panel trim. The Park Avenue Ultra carried a higher base price than Cadillac's Sedan de Ville. The Park Avenue Ultra did not gain much popular recognition, however, until the following generation of Park Avenue where the "Ultra" badge offered even more features.[12]

Essence concept car

[edit]
1989 Buick Park Avenue Essence

The Buick Park Avenue Essence was a concept car designed and engineered by the Buick division of General Motors to showcase advanced technology and styling. First shown in 1989 in a metallic light green color, the Essence made rounds through the auto show circuits later in a metallic white. Inside the Essence was a wide, sweeping instrument panel that housed a prototype Delco Navicar navigation system among other innovations. Smooth, graceful body lines forecast the eventual production Park Avenue, introduced in 1990. The Essence was powered by the then-new 165 hp version of Buick's 3800 OHV V6 engine.

First generation (1991–1996)

[edit]
First generation
Overview
TypePassenger car
ManufacturerBuick
Production1990–1996
Model years1991–1996
AssemblyWentzville, Missouri, United States (Wentzville Assembly) 1991-1994
Flint, Michigan, United States (Buick City) 1994-1996
DesignerDave Holls (1988)[13]
Body and chassis
Body style4-door sedan
LayoutTransverse front-engine, front-wheel drive
PlatformC-body
RelatedBuick LeSabre
Cadillac Sixty Special
Cadillac Fleetwood
Cadillac DeVille
Cadillac Seville
Oldsmobile 98
Pontiac Bonneville
Powertrain
Engine3800 V6 Series I L27 NA (91-94)

3800 V6 Series I L67 SC (91-95)
3800 V6 Series II L67 SC (1996)

3800 V6 Series II L36 NA (95-96)
Power outputL27 series I: 170 hp (91-94)
L36 series II: 205 hp (95-96)
L67 series I: 205 hp (91-93)
L67 series I: 225 (94-95)
L67 Series II: 240hp (96)
Transmission4-speed 4T60-E automatic
Dimensions
Wheelbase110.8 in (2,814 mm)
Length1991–93: 205.2 in (5,212 mm)
1994–96: 205.9 in (5,230 mm)
Width1991–93: 74.9 in (1,902 mm)
1994–96: 74.1 in (1,882 mm)
Height1991–93: 55.3 in (1,405 mm)
1994–96: 55.1 in (1,400 mm)
Curb weight3,536 lb (1,604 kg)
Chronology
PredecessorBuick Electra

The 1991 Park Avenue, introduced in July 1990, used GM's C platform and was previewed by the 1989 Park Avenue Essence show car. Much of the Park Avenue's styling vocabulary made their way to subsequent Buick models restyled in the 1990s. Projections were for sales of 100,000 annually.[14]

The Park Avenue was Buick's largest front-wheel-drive sedan, but the even larger rear-wheel-drive Roadmaster returned to the line for 1991 as a station wagon and 1992 as a sedan. However, the base Park Avenue was still priced higher than the Roadmaster Limited (its more luxurious trim).[15] Park Avenue was marketed as the flagship of the Buick line.

This generation featured DynaRide, a deflected-disc strut valving system which first appeared as standard on the Electra, LeSabre, Riviera, and Skylark in 1988.[16][17][18] Also included was an automatic level control system, where an air compressor pressurized the rear Chapman struts to maintain an overall level ride height. DynaRide and automatic level control were not available on vehicles equipped with the optional Gran Touring suspension package. Larger 16" aluminum wheels were also included with the package starting in 1992, while the standard model had 15" aluminum wheels.

The base-model Park Avenue featured a 3.8 L naturally-aspirated V6 engine and velour interior, upgradeable to leather. Starting in 1992, the Ultra came with a 3.8 L supercharged V6 engine and leather interior. The Park Avenue received various exterior and interior cosmetic changes, as well as powertrain updates, during this run. Some of the new options and features added to the first generation included driver (and later passenger) airbags, dual-zone climate control, traction control, and variable-effort steering (Ultra only).

Buick Park Avenue Production Figures[19]
Yearly Total
1991 117,075
1992 63,390
1993 55,210
1994 64,665
1995 62,994
1996 46,953
Total 410,287

Europe

[edit]

The Park Avenue was available in Europe from 1991 until 1996 and varied from the North American version by featuring a truncated taillamps with separate amber turn signal indicators and red brake lamps, wider numberplate bezel, fitment of rear red fog lamps, headlamps with different lens pattern, white front side running markers, amber front turn signal indicators, side turn signal repeaters, "flagpole" external rear-view mirrors (mirrors on US version are fixed and do not turn), different door handles, some with a badge mounted directly to the hood rather than an ornament, stronger seat belt and anchors, "softer" air bags, metric speedometer and gauges. They are to comply with the European regulatory and safety standards. This generation of the Park Avenue was the last Buick to be officially marketed by GM in Europe. This move was to reduce the "cluttered" model range that confused the European consumers. After 1996, Cadillac and Chevrolet remained the sole General Motors North American brands to be sold in Europe.

Second generation (1997–2005)

[edit]
Second generation
Overview
Production1996–2005
Model years1997–2005
AssemblyHamtramck, Michigan, United States (Detroit/Hamtramck Assembly)
Lake Orion, Michigan, United States (Orion Assembly)
DesignerBill Porter[20]
Body and chassis
Body style4-door sedan
LayoutTransverse front-engine, front-wheel drive
PlatformG platform[21]
RelatedBuick Riviera
Oldsmobile Aurora
Cadillac DeVille
Cadillac Seville
Buick LeSabre
Pontiac Bonneville
Powertrain
Engine3.8 L Buick V6 (Series II)
3.8 L Buick V6 (Series II Supercharged)
Transmission4-speed 4T65-E automatic
4-speed 4T65-E HD automatic
Dimensions
Wheelbase113.8 in (2,890 mm)
Length206.8 in (5,250 mm)
Width74.7 in (1,900 mm)
Height57.4 in (1,460 mm)
Curb weight3,778–3,884 lb (1,714–1,762 kg)

An updated Park Avenue was released in October 1996 as a 1997 model, using GM's G platform, which was stronger and more substantial than its predecessor. GM chose to continue to refer to it as the C platform.[22]

The new generation was powered by updated Series II variants of the 3800 and as before, only Ultra models were supercharged. The base trim featured a hood ornament while the Ultra had a less conspicuous tri-shield inset on the upper edge of the grille. The base Park Avenue was the last USDM Buick to carry a factory hood ornament.

For 2001, the base model's cloth interior was dropped as an option in favor of standard leather trim. Ultrasonic rear park assist was a new option that year as well. For 2003, trademark Buick "Ventiports" returned on the Park Avenue Ultra along with a bolder grille that carried a larger monochromatic tri-shield badge in the center. New 17-inch wheels, a revised interior and revised instrument cluster were changed for the 2003 model year on the Ultra.

For 2005, the final model year in North America, base Park Avenues received a revised grille, and the previously Ultra-exclusive Ventiports. Also, the rear fascia was updated across the model line with a prominent chrome bar above the license plate holder with an embossed Park Avenue script and amber turn signal flashers.

The last 3,000 of 7,000 Park Avenues carried Special Edition badging that featured the namesake script underneath a silhouette of the New York City skyline. 300 of these were painted with a special two-tone black-on-platinum finish. Production ended on June 18, 2004.[23] The Park Avenue was discontinued after 2005 in the North American market and was replaced in 2006 by the Buick Lucerne.

Third generation (2007–2012)

[edit]
Third generation
Overview
ManufacturerSAIC-GM
Also calledHolden Special Vehicles Grange Holden Caprice/Statesman
Chevrolet Caprice
Daewoo Veritas
HSV Grange
Bitter Vero
Production2007–2012
AssemblyElizabeth, South Australia (All Parts)
Shanghai, China (Final Assembly)
DesignerJames C. Shyr (2007; interior)
Body and chassis
Body style4-door sedan
LayoutFR layout
PlatformGM Zeta platform
RelatedHolden Commodore
Pontiac G8
Chevrolet Camaro
Chevrolet Lumina
Powertrain
Engine2.8 L LP1 V6
3.0 L LF1 V6
3.6 L LY7 V6
Transmission5-speed GM 5L40E automatic (2007–2009)
6-speed GM 6L50E automatic (2010–2012)
Dimensions
Wheelbase3,009 mm (118.5 in)
Length5,175 mm (203.7 in)
Width1,899 mm (74.8 in)
Height1,480 mm (58.3 in)
Chronology
PredecessorBuick Royaum
Back of the Buick Park Avenue

In April 2007, General Motors reintroduced the Park Avenue nameplate in China on a luxury sedan that replaced the Buick Royaum. Like its predecessor, the vehicle is based on the Australian-built Holden Caprice (this time on the contemporary WM/WN generation), though, unlike the Royaum, it was assembled by Shanghai GM from CKD kits shipped from Holden's Elizabeth factory in South Australia.[24] It is offered in five trim levels: 舒适型 (Comfort), 精英型 (Elite), 豪华型 (Luxury - 2.8 only), 旗舰型 (Flagship) and 旗舰版 (Ultimate - 2010 only)

The Park Avenue was powered by Australian-built versions of the GM High Feature engine. The standard engines were the 2.8 L LP1 and the 3.6 L LY7 engine available as an option on the Elite and Flagship models from 2007 to 2009. The engine control unit is a Bosch E77 32-bit ECM processor.[25]

Type Displacement Power Torque Model years
2.8 L LP1 V6 2,792 cc (170 cu in) 150 kW (201 hp) at 6500 rpm 265 N⋅m (195 lbf⋅ft) at 2600 rpm 2007–2009
3.6 L LY7 V6 3,564 cc (217 cu in) 187 kW (251 hp) at 6600 rpm 340 N⋅m (251 lbf⋅ft) at 2800 rpm 2007–2009
3.0 L LF1 V6 2,994 cc (183 cu in) 187 kW (251 hp) at 6700 rpm 296 N⋅m (218 lbf⋅ft) at 2900 rpm 2010–2012

In 2010, only one engine option was offered, a 3 L SIDI (251 bhp) replacing the old 2.8 V6 and 3.6 V6 due to fuel consumption with the 2.8 litre engine rated at 11.4 litres per 100 kilometres (20.6 MPG US) and the 3.6 litre engine rated 11.6 litres per 100 kilometres (20.3 MPG US) respectively. The 3 litre engine was rated 10.9 litres per 100 kilometres (21.6 MPG US). The third-generation Park Avenue remained a China exclusive and was never offered by Buick in North America. A version of the car did eventually see release in the US market as the stripped down, rebadged Chevrolet Caprice PPV (Police Patrol Vehicle).

It was discontinued in China in October 2012.[26]

References

[edit]
  1. ^ "1975 Buick". www.lov2xlr8.no.
  2. ^ "1975 Buick". www.lov2xlr8.no.
  3. ^ "Photo" (JPG). www.lov2xlr8.no. Retrieved 2019-08-09.
  4. ^ "1975 Park Ave Executive Deluxe Prototype". V8buick.com.
  5. ^ "Auto Brochure". www.lov2xlr8.no.
  6. ^ "Photo" (JPG). www.lov2xlr8.no. Retrieved 2019-08-09.
  7. ^ "Photo" (JPG). www.lov2xlr8.no. Retrieved 2019-08-09.
  8. ^ "Photo" (JPG). www.lov2xlr8.no. Retrieved 2019-08-09.
  9. ^ Klockau, Tom (15 February 2022). "Curbside Classic: 1985 Buick Electra Park Avenue – Best-Dressed C-Body Of The Year".
  10. ^ "Photo" (JPG). www.lov2xlr8.no. Retrieved 2019-08-09.
  11. ^ "lov2xlr8.no". www.lov2xlr8.no.
  12. ^ "Brochures". www.lov2xlr8.no.
  13. ^ Lamm, Michael (13 December 2005). "Dave Holls, who led GM design, dies". Retrieved 16 October 2016.
  14. ^ J.P. Vettraino (March 26, 1990). "Buick's 91 Ultra not quite the Ultimate, p.26". Autoweek. {{cite magazine}}: Cite magazine requires |magazine= (help)
  15. ^ "1992 Combined Car Base Price Information" (PDF). michigan.gov.
  16. ^ "1988 Buick". www.lov2xlr8.no. Retrieved 2024-08-08.
  17. ^ "1991 Buick Full Line Prestige" (PDF). Dezo's Garage. Retrieved 2024-08-08.
  18. ^ "1991 Buick Park Avenue" (PDF). Dezo's Garage. Retrieved 2024-08-08.
  19. ^ Flammang, James M. (1999). Standard catalog of American cars, 1976-1999. Ron Kowalke (3rd ed.). Iola, WI: Krause Publications. ISBN 0-87341-755-0. OCLC 43301709.
  20. ^ "1997 Buick Park Avenue". 17 February 1996. Retrieved 17 October 2017.
  21. ^ Frame, Phil (16 January 1995). "GM H CARS MOVE TO G PLATFORM". Automotive News. Archived from the original on 16 June 2013. Retrieved 17 May 2013.
  22. ^ Frame, Phil (16 January 1995). "GM H CARS MOVE TO G PLATFORM". Automotive News. Archived from the original on 16 June 2013. Retrieved 17 May 2013.
  23. ^ "Buick Park Avenue". CarGurus.
  24. ^ Dornin, Tim (11 April 2007). "WM Statesman derived Buick to be assembled from CKD kits and sold in China". Fairfax Media. Archived from the original on 16 August 2013. Retrieved 15 April 2007.
  25. ^ Nunez, Alex (10 April 2007). "Buick reintroduces the Park Avenue...in China". Autoblog.
  26. ^ "Buick Park Avenue Is Coming to an End". ChinaAutoWeb. 22 October 2012. Retrieved 2 September 2014.
[edit]

Media related to Buick Park Avenue at Wikimedia Commons