Jump to content

Brine

From Wikipedia, the free encyclopedia
(Redirected from Brine water)
For other uses, see Brine (disambiguation).
Part of a series on
Water salinity
Salinity levels
Fresh water (< 0.05%)
Brackish water (0.05–3%)
Saline water (3–5%)
Brine (> 5% up to 26%–28% max)
Bodies of water

Brine (or briny water) is water with a high-concentration solution of salt (typically sodium chloride or calcium chloride). In diverse contexts, brine may refer to the salt solutions ranging from about 3.5% (a typical concentration of seawater, on the lower end of that of solutions used for brining foods) up to about 26% (a typical saturated solution, depending on temperature). Brine forms naturally due to evaporation of ground saline water but it is also generated in the mining of sodium chloride.[1] Brine is used for food processing and cooking (pickling and brining), for de-icing of roads and other structures, and in a number of technological processes. It is also a by-product of many industrial processes, such as desalination, so it requires wastewater treatment for proper disposal or further utilization (fresh water recovery).[2]

In nature

[edit]
Main article: Saline water
A NASA technician measures the concentration level of brine using a hydrometer at a salt evaporation pond in San Francisco.

Brines are produced in multiple ways in nature. Modification of seawater via evaporation results in the concentration of salts in the residual fluid, a characteristic geologic deposit called an evaporite is formed as different dissolved ions reach the saturation states of minerals, typically gypsum and halite. Dissolution of such salt deposits into water can produce brines as well. As seawater freezes, dissolved ions tend to remain in solution resulting in a fluid termed a cryogenic brine. At the time of formation, these cryogenic brines are by definition cooler than the freezing temperature of seawater and can produce a feature called a brinicle where cool brines descend, freezing the surrounding seawater.

The brine cropping out at the surface as saltwater springs are known as "licks" or "salines".[3] The contents of dissolved solids in groundwater vary highly from one location to another on Earth, both in terms of specific constituents (e.g. halite, anhydrite, carbonates, gypsum, fluoride-salts, organic halides, and sulfate-salts) and regarding the concentration level. Using one of several classification of groundwater based on total dissolved solids (TDS), brine is water containing more than 100,000 mg/L TDS.[4] Brine is commonly produced during well completion operations, particularly after the hydraulic fracturing of a well.

Uses

[edit]

Culinary

[edit]
Main article: Brining

Brine is a common agent in food processing and cooking. Brining is used to preserve or season the food. Brining can be applied to vegetables, cheeses, fruit and some fish in a process known as pickling. Meat and fish are typically steeped in brine for shorter periods of time, as a form of marination, enhancing its tenderness and flavor, or to enhance shelf period.

Chlorine production

[edit]
Main article: Chlorine production

Elemental chlorine can be produced by electrolysis of brine (NaCl solution). This process also produces sodium hydroxide (NaOH) and hydrogen gas (H2). The reaction equations are as follows:

  • Cathode: 2 H+ + 2 e− → H2 ↑
  • Anode: 2 Cl− → Cl2 ↑ + 2 e−
  • Overall process: 2 NaCl + 2 H2O → Cl2 + H2 + 2 NaOH

Refrigerating fluid

[edit]

Brine is used as a secondary fluid in large refrigeration installations for the transport of thermal energy. Most commonly used brines are based on inexpensive calcium chloride and sodium chloride.[5] It is used because the addition of salt to water lowers the freezing temperature of the solution and the heat transport efficiency can be greatly enhanced for the comparatively low cost of the material. The lowest freezing point obtainable for NaCl brine is −21.1 °C (−6.0 °F) at the concentration of 23.3% NaCl by weight.[5] This is called the eutectic point.

Because of their corrosive properties salt-based brines have been replaced by organic liquids such as ethylene glycol.[6]

Sodium chloride brine spray is used on some fishing vessels to freeze fish.[7] The brine temperature is generally −5 °F (−21 °C). Air blast freezing temperatures are −31 °F (−35 °C) or lower. Given the higher temperature of brine, the system efficiency over air blast freezing can be higher. High-value fish usually are frozen at much lower temperatures, below the practical temperature limit for brine.

Water softening and purification

[edit]

Brine is an auxiliary agent in water softening and water purification systems involving ion exchange technology. The most common example are household dishwashers, utilizing sodium chloride in form of dishwasher salt. Brine is not involved in the purification process itself, but used for regeneration of ion-exchange resin on cyclical basis. The water being treated flows through the resin container until the resin is considered exhausted and water is purified to a desired level. Resin is then regenerated by sequentially backwashing the resin bed to remove accumulated solids, flushing removed ions from the resin with a concentrated solution of replacement ions, and rinsing the flushing solution from the resin.[8] After treatment, ion-exchange resin beads saturated with calcium and magnesium ions from the treated water, are regenerated by soaking in brine containing 6–12% NaCl. The sodium ions from brine replace the calcium and magnesium ions on the beads.[9][10]

De-icing

[edit]

In lower temperatures, a brine solution can be used to de-ice or reduce freezing temperatures on roads.[11]

Quenching

[edit]

Quenching is a heat-treatment process when forging metals such as steel. A brine solution, along with oil and other substances, is commonly used to harden steel. When brine is used, there is an enhanced uniformity of the cooling process and heat transfer.[12]

Desalination

[edit]

The desalination process consists of the separation of salts from an aqueous solution to obtain fresh water from a source of seawater or brackish water; and in turn, a discharge is generated, commonly called brine.[13]

Marine brine discharge in Chile with its surrounding marine life

Characteristics

[edit]

The characteristics of the discharge depend on different factors, such as the desalination technology used, salinity and quality of the water used, environmental and oceanographic characteristics, desalination process carried out, among others.[14] The discharge of desalination plants by seawater reverse osmosis (SWRO), are mainly characterized by presenting a salinity concentration that can, in the worst case, double the salinity of the seawater used, and unlike of thermal desalination plants, have practically the same temperature and dissolved oxygen as the seawater used.[15][16]

Dissolved chemicals

[edit]

The discharge could contain trace chemical products used during the industrial treatments applies,such as antiscalants,[17] coagulants, flocculants which are discarded together with the discharge, and which could affect the physical-chemical quality of the effluent. However, these are practically consumed during the process and the concentrations in the discharge are very low, which are practically diluted during the discharge, without affecting marine ecosystems.[18][19]

Heavy metals

[edit]

The materials used in SWRO plants are dominated by non-metallic components and stainless steels, since lower operating temperatures allow the construction of desalination plants with more corrosion-resistant coatings.[20][14] Therefore, the concentration values of heavy metals in the discharge of SWRO plants are much lower than the acute toxicity levels to generate environmental impacts on marine ecosystems.[21][14][22]

Discharge

[edit]

The discharge is generally dumped back into the sea, through an underwater outfall or coastal release, due to its lower energy and economic cost compared to other discharge methods.[19][23] Due to its increase in salinity, the discharge has a greater density compared to the surrounding seawater. Therefore, when the discharge reaches the sea, it can form a saline plume that can tends to follow the bathymetric line of the bottom until it is completely diluted.[24][25][26] The distribution of the salt plume may depend on different factors, such as the production capacity of the plant, the discharge method, the oceanographic and environmental conditions of the discharge point, among others.[15][24][23][27]

Marine environment

[edit]

Brine discharge might lead to an increase in salinity above certain threshold levels that has the potential to affect benthic communities, especially those more sensitive to osmotic pressure, finally having an effect on their abundance and diversity.[28][29][30]

However, if appropriate mitigation measures are applied, the potential environmental impacts of discharges from SWRO plants can be correctly minimized.[19][27] Some examples can be found in countries such as Spain, Israel, Chile or Australia, in which the mitigation measures adopted reduce the area affected by the discharge, guaranteeing a sustainable development of the desalination process without significant impacts on marine ecosystems.[31][32][33][34][35][27][36] When noticeable effects have been detected on the environment surrounding discharge areas, it generally corresponds to old desalination plants in which the correct mitigation measures were not implemented.[37][31][38] Some examples can be found in Spain, Australia or Chile, where it has been shown that saline plumes do not exceed values of 5% with respect to the natural salinity of the sea in a radius less than 100 m from the point of discharge when proper measures are adopted.[33][27]

Mitigation measures

[edit]

The mitigation measures that are typically employed to prevent negatively impact sensitive marine environment are listed below:[39][40][41]

  • A well-designed discharge mechanisms, employing the use of efficient diffusers or pre-dilution of discharges with seawater
  • An environmental evaluation study, which assesses the correct location of the discharge point, considering geomorphological and oceanographic variables, such as currents, bathymetry, and type of bottom, which favor a rapid mixing process of the discharges;
  • The implementation of an adequate environmental surveillance program, which guarantees the correct operation of the desalination plants during their operational phase, allowing an accurate and early diagnostics of potential environmental threats

Regulation

[edit]

Currently, in many countries, such as Spain, Israel, Chile and Australia, the development of a rigorous environmental impact assessment process is required, both for the construction and operational phases.[42][43][44] During its development, the most important legal management tools are established within the local environmental regulation, to prevent and adopt mitigation measures that guarantee the sustainable development of desalination projects. This includes a series of administrative tools and periodic environmental monitoring, to adopt preventive, corrective and further monitoring measures of the state of the surrounding marine environment.[45][46]

Under the context of this environmental assessment process, numerous countries require compliance with an Environmental Monitoring Program (PVA), in order to evaluate the effectiveness of the preventive and corrective measures established during the environmental assessment process, and thus guarantee the operation of desalination plants without producing significant environmental impacts.[47][48] The PVAs establishes a series of mandatory requirements that are mainly related to the monitoring of discharge, using a series of measurements and characterizations based on physical-chemical and biological information.[47][48] In addition, the PVAs could also include different requirements related to monitoring the effects of seawater intake and those that may potentially be related to effects on the terrestrial environment.

Wastewater

[edit]
Main article: Industrial wastewater treatment § Brine treatment

Brine is a byproduct of many industrial processes, such as desalination, power plant cooling towers, produced water from oil and natural gas extraction, acid mine or acid rock drainage, reverse osmosis reject, chlor-alkali wastewater treatment, pulp and paper mill effluent, and waste streams from food and beverage processing. Along with diluted salts, it can contain residues of pretreatment and cleaning chemicals, their reaction byproducts and heavy metals due to corrosion.

Wastewater brine can pose a significant environmental hazard, both due to corrosive and sediment-forming effects of salts and toxicity of other chemicals diluted in it.[49]

Unpolluted brine from desalination plants and cooling towers can be returned to the ocean. From the desalination process, reject brine is produced, which proposes potential damages to the marine life and habitats.[50] To limit the environmental impact, it can be diluted with another stream of water, such as the outfall of a wastewater treatment or power plant. Since brine is heavier than seawater and would accumulate on the ocean bottom, it requires methods to ensure proper diffusion, such as installing underwater diffusers in the sewerage.[51] Other methods include drying in evaporation ponds, injecting to deep wells, and storing and reusing the brine for irrigation, de-icing or dust control purposes.[49]

Technologies for treatment of polluted brine include: membrane filtration processes, such as reverse osmosis and forward osmosis; ion exchange processes such as electrodialysis or weak acid cation exchange; or evaporation processes, such as thermal brine concentrators and crystallizers employing mechanical vapour recompression and steam. New methods for membrane brine concentration, employing osmotically assisted reverse osmosis and related processes, are beginning to gain ground as part of zero liquid discharge systems (ZLD).[52]

Composition and purification

[edit]

Brine consists of concentrated solution of Na+ and Cl− ions. Sodium chloride per se does not exist in water: it is fully ionized. Other cations found in various brines include K+, Mg2+, Ca2+, and Sr2+. The latter three are problematic because they form scale and they react with soaps. Aside from chloride, brines sometimes contain Br− and I− and, most problematically, SO2−
4. Purification steps often include the addition of calcium oxide to precipitate solid magnesium hydroxide together with gypsum (CaSO4), which can be removed by filtration. Further purification is achieved by fractional crystallization. The resulting purified salt is called evaporated salt or vacuum salt.[1]

See also

[edit]

References

[edit]
  1. ^ a b Westphal, Gisbert; Kristen, Gerhard; Wegener, Wilhelm; Ambatiello, Peter; Geyer, Helmut; Epron, Bernard; Bonal, Christian; Steinhauser, Georg; Götzfried, Franz (2010). "Sodium Chloride". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a24_317.pub4. ISBN 978-3527306732.
  2. ^ Panagopoulos, Argyris; Haralambous, Katherine-Joanne; Loizidou, Maria (November 2019). "Desalination brine disposal methods and treatment technologies – A review". Science of the Total Environment. 693: 133545. Bibcode:2019ScTEn.693m3545P. doi:10.1016/j.scitotenv.2019.07.351. PMID 31374511. S2CID 199387639.
  3. ^ "The Scioto Saline-Ohio's Early Salt Industry" (PDF). dnr.state.oh.us. Archived from the original (PDF) on 2012-10-07.
  4. ^ "Global Overview of Saline Groundwater Occurrence and Genesis". igrac.net. Archived from the original on 2011-07-23. Retrieved 2017-07-17.
  5. ^ a b "Secondary Refrigerant Systems". Cool-Info.com. Retrieved 17 July 2017.
  6. ^ "Calcium Chloride versus Glycol". accent-refrigeration.com. Retrieved 17 July 2017.
  7. ^ Kolbe, Edward; Kramer, Donald (2007). Planning for Seafood Freezing (PDF). Alaska Sea Grant College Program Oregon State University. ISBN 978-1566121194. Archived from the original (PDF) on 12 July 2017. Retrieved 17 July 2017.
  8. ^ Kemmer, Frank N., ed. (1979). The NALCO Water Handbook. McGraw-Hill. pp. 12–7, 12–25.
  9. ^ "Hard and soft water". GCSE Bitesize. BBC.
  10. ^ Arup K. SenGupta (2016). Ion Exchange and Solvent Extraction: A Series of Advances. CRC Press. pp. 125–. ISBN 978-1-4398-5540-9.
  11. ^ "Prewetting with Salt Brine for More Effective Roadway Deicing". www.usroads.com. Archived from the original on 2015-01-07. Retrieved 2012-01-14.
  12. ^ 3. Luís H. Pizetta Zordão, Vinícius A. Oliveira, George E. Totten, Lauralice C.F. Canale, "Quenching power of aqueous salt solution", International Journal of Heat and Mass Transfer, Volume 140, 2019, pp. 807–818.
  13. ^ Mezher, Toufic; Fath, Hassan; Abbas, Zeina; Khaled, Arslan (2011-01-31). "Techno-economic assessment and environmental impacts of desalination technologies". Desalination. 266 (1): 263–273. Bibcode:2011Desal.266..263M. doi:10.1016/j.desal.2010.08.035. ISSN 0011-9164.
  14. ^ a b c Panagopoulos, Argyris; Haralambous, Katherine-Joanne (December 2020). "Environmental impacts of desalination and brine treatment - Challenges and mitigation measures". Marine Pollution Bulletin. 161 (Pt B): 111773. Bibcode:2020MarPB.16111773P. doi:10.1016/j.marpolbul.2020.111773. ISSN 0025-326X. PMID 33128985.
  15. ^ a b Abessi, Ozeair (2018), "Brine Disposal and Management—Planning, Design, and Implementation", Sustainable Desalination Handbook, Elsevier, pp. 259–303, doi:10.1016/b978-0-12-809240-8.00007-1, ISBN 978-0-12-809240-8, retrieved 2024-04-09
  16. ^ Mezher, Toufic; Fath, Hassan; Abbas, Zeina; Khaled, Arslan (January 2011). "Techno-economic assessment and environmental impacts of desalination technologies". Desalination. 266 (1–3): 263–273. Bibcode:2011Desal.266..263M. doi:10.1016/j.desal.2010.08.035. ISSN 0011-9164.
  17. ^ Chuan Yee Lee, Brandon; Tan, Eileen; Lu, Yinghong; Komori, Hideyuki; Pietsch, Sara; Goodlett, Robb; James, Matt (2023-10-01). "Antiscalant and its deactivation in zero/minimized liquid discharge (ZLD/MLD) application in the mining sector – Opportunities, challenges and prospective". Minerals Engineering. 201: 108238. Bibcode:2023MiEng.20108238C. doi:10.1016/j.mineng.2023.108238. ISSN 0892-6875.
  18. ^ Blanco-Murillo, Fabio; Marín-Guirao, Lázaro; Sola, Iván; Rodríguez-Rojas, Fernanda; Ruiz, Juan M.; Sánchez-Lizaso, José Luis; Sáez, Claudio A. (November 2023). "Desalination brine effects beyond excess salinity: Unravelling specific stress signaling and tolerance responses in the seagrass Posidonia oceanica". Chemosphere. 341: 140061. Bibcode:2023Chmsp.34140061B. doi:10.1016/j.chemosphere.2023.140061. hdl:10045/137033. ISSN 0045-6535. PMID 37689149.
  19. ^ a b c Fernández-Torquemada, Yolanda; Carratalá, Adoración; Sánchez Lizaso, José Luis (2019). "Impact of brine on the marine environment and how it can be reduced". Desalination and Water Treatment. 167: 27–37. Bibcode:2019DWatT.167...27F. doi:10.5004/dwt.2019.24615. hdl:10045/101370.
  20. ^ Lin, Yung-Chang; Chang-Chien, Guo-Ping; Chiang, Pen-Chi; Chen, Wei-Hsiang; Lin, Yuan-Chung (August 2013). "Potential impacts of discharges from seawater reverse osmosis on Taiwan marine environment". Desalination. 322: 84–93. Bibcode:2013Desal.322...84L. doi:10.1016/j.desal.2013.05.009. ISSN 0011-9164.
  21. ^ Gheorghe, Stefania; Stoica, Catalina; Vasile, Gabriela Geanina; Nita-Lazar, Mihai; Stanescu, Elena; Lucaciu, Irina Eugenia (2017-01-18), "Metals Toxic Effects in Aquatic Ecosystems: Modulators of Water Quality", Water Quality, IntechOpen, doi:10.5772/65744, ISBN 978-953-51-2882-3, retrieved 2024-04-09
  22. ^ Zhou, Jin; Chang, Victor W.-C.; Fane, Anthony G. (January 2013). "An improved life cycle impact assessment (LCIA) approach for assessing aquatic eco-toxic impact of brine disposal from seawater desalination plants". Desalination. 308: 233–241. Bibcode:2013Desal.308..233Z. doi:10.1016/j.desal.2012.07.039. ISSN 0011-9164.
  23. ^ a b Missimer, Thomas M.; Maliva, Robert G. (May 2018). "Environmental issues in seawater reverse osmosis desalination: Intakes and outfalls". Desalination. 434: 198–215. Bibcode:2018Desal.434..198M. doi:10.1016/j.desal.2017.07.012. ISSN 0011-9164.
  24. ^ a b Fernández-Torquemada, Yolanda; Gónzalez-Correa, José Miguel; Loya, Angel; Ferrero, Luis Miguel; Díaz-Valdés, Marta; Sánchez-Lizaso, José Luis (May 2009). "Dispersion of brine discharge from seawater reverse osmosis desalination plants". Desalination and Water Treatment. 5 (1–3): 137–145. Bibcode:2009DWatT...5..137F. doi:10.5004/dwt.2009.576. hdl:10045/11309. ISSN 1944-3994.
  25. ^ Loya-Fernández, Ángel; Ferrero-Vicente, Luis Miguel; Marco-Méndez, Candela; Martínez-García, Elena; Zubcoff Vallejo, José Jacobo; Sánchez-Lizaso, José Luis (April 2018). "Quantifying the efficiency of a mono-port diffuser in the dispersion of brine discharges". Desalination. 431: 27–34. Bibcode:2018Desal.431...27L. doi:10.1016/j.desal.2017.11.014. ISSN 0011-9164.
  26. ^ Palomar, P.; Lara, J.L.; Losada, I.J.; Rodrigo, M.; Alvárez, A. (March 2012). "Near field brine discharge modelling part 1: Analysis of commercial tools". Desalination. 290: 14–27. Bibcode:2012Desal.290...14P. doi:10.1016/j.desal.2011.11.037. ISSN 0011-9164.
  27. ^ a b c d Sola, Iván; Fernández-Torquemada, Yolanda; Forcada, Aitor; Valle, Carlos; del Pilar-Ruso, Yoana; González-Correa, José M.; Sánchez-Lizaso, José Luis (December 2020). "Sustainable desalination: Long-term monitoring of brine discharge in the marine environment". Marine Pollution Bulletin. 161 (Pt B): 111813. Bibcode:2020MarPB.16111813S. doi:10.1016/j.marpolbul.2020.111813. hdl:10045/110110. ISSN 0025-326X. PMID 33157504.
  28. ^ de-la-Ossa-Carretero, J. A.; Del-Pilar-Ruso, Y.; Loya-Fernández, A.; Ferrero-Vicente, L. M.; Marco-Méndez, C.; Martinez-Garcia, E.; Giménez-Casalduero, F.; Sánchez-Lizaso, J. L. (2016-02-15). "Bioindicators as metrics for environmental monitoring of desalination plant discharges". Marine Pollution Bulletin. 103 (1): 313–318. Bibcode:2016MarPB.103..313D. doi:10.1016/j.marpolbul.2015.12.023. ISSN 0025-326X. PMID 26781455.
  29. ^ Del-Pilar-Ruso, Yoana; Martinez-Garcia, Elena; Giménez-Casalduero, Francisca; Loya-Fernández, Angel; Ferrero-Vicente, Luis Miguel; Marco-Méndez, Candela; de-la-Ossa-Carretero, Jose Antonio; Sánchez-Lizaso, José Luis (2015-03-01). "Benthic community recovery from brine impact after the implementation of mitigation measures". Water Research. 70: 325–336. Bibcode:2015WatRe..70..325D. doi:10.1016/j.watres.2014.11.036. hdl:10045/44105. ISSN 0043-1354. PMID 25543242.
  30. ^ Sánchez-Lizaso, José Luis; Romero, Javier; Ruiz, Juanma; Gacia, Esperança; Buceta, José Luis; Invers, Olga; Fernández Torquemada, Yolanda; Mas, Julio; Ruiz-Mateo, Antonio; Manzanera, Marta (2008-03-01). "Salinity tolerance of the Mediterranean seagrass Posidonia oceanica: recommendations to minimize the impact of brine discharges from desalination plants". Desalination. European Desalination Society and Center for Research and Technology Hellas (CERTH), Sani Resort 22 –25 April 2007, Halkidiki, Greece. 221 (1): 602–607. Bibcode:2008Desal.221..602S. doi:10.1016/j.desal.2007.01.119. ISSN 0011-9164.
  31. ^ a b Del-Pilar-Ruso, Yoana; Martinez-Garcia, Elena; Giménez-Casalduero, Francisca; Loya-Fernández, Angel; Ferrero-Vicente, Luis Miguel; Marco-Méndez, Candela; de-la-Ossa-Carretero, Jose Antonio; Sánchez-Lizaso, José Luis (March 2015). "Benthic community recovery from brine impact after the implementation of mitigation measures". Water Research. 70: 325–336. Bibcode:2015WatRe..70..325D. doi:10.1016/j.watres.2014.11.036. hdl:10045/44105. ISSN 0043-1354. PMID 25543242.
  32. ^ Fernández-Torquemada, Yolanda; Carratalá, Adoración; Sánchez Lizaso, José Luis (2019). "Impact of brine on the marine environment and how it can be reduced" (PDF). Desalination and Water Treatment. 167: 27–37. Bibcode:2019DWatT.167...27F. doi:10.5004/dwt.2019.24615. hdl:10045/101370.
  33. ^ a b Kelaher, Brendan P.; Clark, Graeme F.; Johnston, Emma L.; Coleman, Melinda A. (2020-01-21). "Effect of Desalination Discharge on the Abundance and Diversity of Reef Fishes". Environmental Science & Technology. 54 (2): 735–744. Bibcode:2020EnST...54..735K. doi:10.1021/acs.est.9b03565. ISSN 0013-936X. PMID 31849222.
  34. ^ Muñoz, Pamela T.; Rodríguez-Rojas, Fernanda; Celis-Plá, Paula S. M.; López-Marras, Américo; Blanco-Murillo, Fabio; Sola, Iván; Lavergne, Céline; Valenzuela, Fernando; Orrego, Rodrigo; Sánchez-Lizaso, José Luis; Sáez, Claudio A. (2023). "Desalination effects on macroalgae (part b): Transplantation experiments at brine-impacted sites with Dictyota spp. from the Pacific Ocean and Mediterranean Sea". Frontiers in Marine Science. 10. doi:10.3389/fmars.2023.1042799. hdl:10045/131985. ISSN 2296-7745.
  35. ^ Rodríguez-Rojas, Fernanda; López-Marras, Américo; Celis-Plá, Paula S.M.; Muñoz, Pamela; García-Bartolomei, Enzo; Valenzuela, Fernando; Orrego, Rodrigo; Carratalá, Adoración; Sánchez-Lizaso, José Luis; Sáez, Claudio A. (September 2020). "Ecophysiological and cellular stress responses in the cosmopolitan brown macroalga Ectocarpus as biomonitoring tools for assessing desalination brine impacts". Desalination. 489: 114527. Bibcode:2020Desal.48914527R. doi:10.1016/j.desal.2020.114527. ISSN 0011-9164.
  36. ^ Sola, Iván; Zarzo, Domingo; Carratalá, Adoración; Fernández-Torquemada, Yolanda; de-la-Ossa-Carretero, José A.; Del-Pilar-Ruso, Yoana; Sánchez-Lizaso, José Luis (October 2020). "Review of the management of brine discharges in Spain". Ocean & Coastal Management. 196: 105301. Bibcode:2020OCM...19605301S. doi:10.1016/j.ocecoaman.2020.105301. ISSN 0964-5691.
  37. ^ Belatoui, Abdelmalek; Bouabessalam, Hassiba; Hacene, Omar Rouane; de-la-Ossa-Carretero, Jose Antonio; Martinez-Garcia, Elena; Sanchez-Lizaso, Jose Luis (2017). "Environmental effects of brine discharge from two desalinations plants in Algeria (South Western Mediterranean)". Desalination and Water Treatment. 76: 311–318. Bibcode:2017DWatT..76..311B. doi:10.5004/dwt.2017.20812.
  38. ^ Fernández-Torquemada, Yolanda; González-Correa, José Miguel; Sánchez-Lizaso, José Luis (January 2013). "Echinoderms as indicators of brine discharge impacts". Desalination and Water Treatment. 51 (1–3): 567–573. Bibcode:2013DWatT..51..567F. doi:10.1080/19443994.2012.716609. hdl:10045/27557. ISSN 1944-3994.
  39. ^ Sola, Iván; Fernández-Torquemada, Yolanda; Forcada, Aitor; Valle, Carlos; del Pilar-Ruso, Yoana; González-Correa, José M.; Sánchez-Lizaso, José Luis (December 2020). "Sustainable desalination: Long-term monitoring of brine discharge in the marine environment". Marine Pollution Bulletin. 161 (Pt B): 111813. Bibcode:2020MarPB.16111813S. doi:10.1016/j.marpolbul.2020.111813. hdl:10045/110110. ISSN 0025-326X. PMID 33157504.
  40. ^ Sola, Iván; Sáez, Claudio A.; Sánchez-Lizaso, José Luis (November 2021). "Evaluating environmental and socio-economic requirements for improving desalination development". Journal of Cleaner Production. 324: 129296. doi:10.1016/j.jclepro.2021.129296. hdl:10045/118667. ISSN 0959-6526.
  41. ^ Sola, Iván; Sánchez-Lizaso, José Luis; Muñoz, Pamela T.; García-Bartolomei, Enzo; Sáez, Claudio A.; Zarzo, Domingo (October 2019). "Assessment of the Requirements within the Environmental Monitoring Plans Used to Evaluate the Environmental Impacts of Desalination Plants in Chile". Water. 11 (10): 2085. doi:10.3390/w11102085. hdl:10045/97207. ISSN 2073-4441.
  42. ^ Fuentes-Bargues, José Luis (August 2014). "Analysis of the process of environmental impact assessment for seawater desalination plants in Spain". Desalination. 347: 166–174. Bibcode:2014Desal.347..166F. doi:10.1016/j.desal.2014.05.032. ISSN 0011-9164.
  43. ^ Sadhwani Alonso, J. Jaime; Melián-Martel, Noemi (2018), "Environmental Regulations—Inland and Coastal Desalination Case Studies", Sustainable Desalination Handbook, Elsevier, pp. 403–435, doi:10.1016/b978-0-12-809240-8.00010-1, ISBN 978-0-12-809240-8, retrieved 2024-04-10
  44. ^ Sola, Iván; Sáez, Claudio A.; Sánchez-Lizaso, José Luis (November 2021). "Evaluating environmental and socio-economic requirements for improving desalination development". Journal of Cleaner Production. 324: 129296. doi:10.1016/j.jclepro.2021.129296. hdl:10045/118667. ISSN 0959-6526.
  45. ^ Elsaid, Khaled; Sayed, Enas Taha; Abdelkareem, Mohammad Ali; Baroutaji, Ahmad; Olabi, A. G. (2020-10-20). "Environmental impact of desalination processes: Mitigation and control strategies". Science of the Total Environment. 740: 140125. Bibcode:2020ScTEn.740n0125E. doi:10.1016/j.scitotenv.2020.140125. ISSN 0048-9697. PMID 32927546.
  46. ^ Sadhwani Alonso, J. Jaime; Melián-Martel, Noemi (2018-01-01), Gude, Veera Gnaneswar (ed.), "Chapter 10 - Environmental Regulations—Inland and Coastal Desalination Case Studies", Sustainable Desalination Handbook, Butterworth-Heinemann, pp. 403–435, doi:10.1016/b978-0-12-809240-8.00010-1, ISBN 978-0-12-809240-8, retrieved 2024-04-10
  47. ^ a b Sola, Iván; Sánchez-Lizaso, José Luis; Muñoz, Pamela T.; García-Bartolomei, Enzo; Sáez, Claudio A.; Zarzo, Domingo (October 2019). "Assessment of the Requirements within the Environmental Monitoring Plans Used to Evaluate the Environmental Impacts of Desalination Plants in Chile". Water. 11 (10): 2085. doi:10.3390/w11102085. hdl:10045/97207. ISSN 2073-4441.
  48. ^ a b Sola, Iván; Zarzo, Domingo; Sánchez-Lizaso, José Luis (2019-12-01). "Evaluating environmental requirements for the management of brine discharges in Spain". Desalination. 471: 114132. Bibcode:2019Desal.47114132S. doi:10.1016/j.desal.2019.114132. hdl:10045/96149. ISSN 0011-9164.
  49. ^ a b "7 Ways to Dispose of Brine Waste". Desalitech. Archived from the original on 27 September 2017. Retrieved 18 July 2017.
  50. ^ 5. A. Giwa, V. Dufour, F. Al Marzooqi, M. Al Kaabi, S.W. Hasan, "Brine management methods: Recent innovations and current status", Desalination, Volume 407, 2017, pp. 1–23
  51. ^ "Reverse Osmosis Desalination: Brine disposal". Lenntech. Retrieved 18 July 2017.
  52. ^ "Novel Technology for Concentration of Brine Using Membrane-Based System" (PDF). Water Today. Retrieved 31 August 2019.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Brine&oldid=1242476076"