Brennabor Typ S
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
The Brennabor Typ S, launched in 1922, was a car introduced by the Brennabor company in order to complement their larger Typ P model. In 1925 it was replaced by the Brennabor Typ R which was essentially an updated version of the same model.
The Typ S was powered by a 4-cylinder side-valve engine of 1.57 litres (96 in3), mounted ahead of the driver and delivering 20 horsepower (15 kW) at 2,200 rpm. Power was delivered to the rear wheels through a single-plate dry clutch and a three-speed gear box controlled with centrally positioned floor-mounted gear stick.
The car sat on a U-profile pressed-steel chassis with rigid axles and semi-elliptical leaf springing. In 1922 it was offered only as an open-topped four-seater. The mechanically linked foot and hand brakes both operated directly against the rear wheels.
By 1925 Brennabor had produced approximately 3,000 Typ Ss
In 1925 the company updated its ranges, and the Brennabor Typ S found itself replaced by the Brennabor Typ R. The engine configuration and size were unchanged, but claimed power increased to 25 horsepower (19 kW) at 2,800 rpm. The car was slightly longer and wider (though also slightly lower) than its predecessor and a range of different body types was offered in addition to the open-topped four-seater. A three-door Phaeton model was designated the R4, and a two-door sedan was known as the R8. A two-door "roadster" and a "droschke-laundaulet" were also listed.
The Type R appeared at a time when the German economy was recovering, at least for the time being, from the most savage predations of the post war slump, and by 1928, after three years in production, the company had produced approximately 20,000 Typ Rs.
Technical details
[edit]Type | S (6/20 PS) (6 tax horsepower / 20 German hp) | R (6/25 PS) (6 tax horsepower / 25 German hp) |
Years in production | 1922–1925 | 1925–1928 |
Bodies | Open 4-seater, | Open 4-seater, 2-door roadster/sedan/cabriolet, 4-door landaulet |
Motor | 4 cyl. In-line 4-stroke | 4 cyl. In-line 4-stroke |
Valvegear | side (SV) | side (SV) |
Bore x stroke | 70 mm (2.8 in) x 102 mm | 70 mm (2.8 in) x 102 mm |
capacity | 1569 cc | 1569 cc |
Power (PS / German hp) | 20 PS (15 kW; 20 hp) | 20 PS (15 kW; 20 hp) |
at rpm (1/min.) | 2,200 | 2,800 |
Torque | 83.4 N⋅m (62 lb⋅ft) | 83.4 N⋅m (62 lb⋅ft) |
at rpm (1/min.) | 800 | 800 |
Compression ratio | 5.25 : 1 | 5.25 : 1 |
fuel consumption | 10.5 L / 100 km | 10.5 L / 100 km |
Gears | 3-speed with central floor-mounted lever | 3-speed with central floor-mounted lever |
Top speed | 70 km/h (43 mph) | 70 km/h (43 mph) |
Unladen weight | ca. 950 kg (2,094 lb) | 1050 – 1,170 kg (2,579 lb) |
Gross loaded weight | 1500 – 1,620 kg (3,571 lb) | ca. 1,500 kg (3,307 lb) |
Electrical system | 6 Volt | 6 Volt |
Length | 3,900 mm (153.5 in) | 4,120 mm (162.2 in) |
Width | 1,470 mm (57.9 in) | 1,560 mm (61.4 in) |
Height | 1,900 mm (74.8 in) | 1,840 mm (72.4 in) |
Wheel base | 2,610 mm (102.8 in) | 2,710 mm (106.7 in) |
Track front / back | 1280 mm / 1280 mm | 1280 mm / 1280 mm |
Tires | 730 x 130 HD or 28" x 4,95" HD or 27" x 4,40" ND | 730 x 130 HD or 28" x 4,95" HD or 27" x 4,40" ND |
Sources
[edit]- Werner Oswald: Deutsche Autos 1920–1945. Motorbuch Verlag Stuttgart, 10. Auflage (1996), ISBN 3-87943-519-7