Jump to content

Beijing–Shanghai railway

From Wikipedia, the free encyclopedia
(Redirected from Beijing-Shanghai Railway)
Beijing–Shanghai railway
The Nanjing Yangtze River Bridge, an important part of the railway, was opened for traffic in 1968
Overview
Other name(s)Jinghu railway
Native name京沪铁路
StatusOperational
OwnerChina Railway
LocaleNorth and East China
Termini
Stations89
Service
TypeHeavy rail
Operator(s)
History
Opened1968
Technical
Line length1,451.4 km (901.9 mi)
Number of tracks2
Track gauge1,435 mm (4 ft 8+12 in) standard gauge
Electrification25 kV 50 Hz AC overhead catenary
Operating speed
  • 160 kilometres per hour (99 mph) (operations)
  • 200–250 kilometres per hour (120–160 mph) (design)
SignallingAutomatic block signaling
Route map

km
0.0
Beijing
8.6
Beijing South
Beijing Fengtai
Fengtai West marshalling yard
33.1
Huangcun
73.2
Guangyang
Yangcun
Hangouzhen
Nancang–Caozhuang line
Beicang
Nancang marshalling yard
Wangqinzhuang
Tianjin North
Tianjin
136.1
Tianjin West
Caozhuang
Tianjin South
Yangliuqing
Jinghai
251.2
Cangzhou
291.5
Botou
365.8
Dezhou
Huangheya
Pingyuan
Handan–Jinan railway to Handan South
Yancheng North
Yancheng
Qiaonan
connection to Jinan Railway
470
Jixi marshalling yard│Jinan West
Jinan
Dangjiazhuang
555.8
Taishan
Shanxi–Henan–Shandong railway
to Watang│to Jufeng
Ciyao
Ciyao–Laiwu railway to Dongdu & Laiwu East
Yanzhou North marshalling yard
640.4
Yanzhou
Chengjiazhuang
673
Zoucheng
Jingting
735.5
Zaozhuang West
Xuzhou North marshalling yard
802.9
Xuzhou
Xuzhou South yard
Fuliji
877.9
Suzhou
Old and new bridge over Huai River
968.2
Bengbu
Bengbu East marshalling yard
1,094.4
Chuzhou North
Yongningzhen
Linchang
Puzhen
Nanjing North
former Nanjing
Railway Ferry
Nanjing Yangtze
River Bridge
Nanjing West
Nanjing EMU depot
1,150.1
Nanjing
Nanjing Chengbei loop line
Xingweicun
Nanjing East marshalling yard
Ningxi Railway
(part of the original route)
Qixiashan
Qixiashan North
to Xinshengwei Port
Longtan
Xiashu
Gaozi
1,213.9
Zhenjiang
1,242.1
Danyang East
Lücheng
Benniu
Xinzhazhen
1,286.3
Changzhou
Qishuyan
1,325.4
Wuxi
Wuxi South
Zhoujingxiang
Shuofang
Wangting
Xushuguan
Suzhou West
1,367.7
Suzhou
Waikuatang
Weiting
1,402.2
Kunshan
Lujiabang
Anting WestAnting North
Anting
Huangdu
Fengbang
Nanxiang North
Nanxiang marshalling yard
Jiangqiaozhen
Nanxiang loop line
Shanghai West
1,451.4
Shanghai
Shanghai North
Shanghai Railway Museum
Shanghai Railway Museum
km

The Beijing–Shanghai railway or Jinghu railway (simplified Chinese: 京沪铁路; traditional Chinese: 京滬鐵路; pinyin: Jīnghù tiělù) is a railway line between Beijing and Shanghai.

The line has a total length of 1,462 km (908 mi) and connects the municipalities of Beijing, Tianjin, and Shanghai, as well as the provinces of Hebei, Shandong, Anhui and Jiangsu. It is commonly referred to as the Jinghu railway, taking on the abbreviated names of the two terminal cities. In Chinese, Jing means "capital" and refers to Beijing, and Hu is the abbreviated name for Shanghai.

History

[edit]

The Beijing–Shanghai railway is composed of three sections. These three sections are some of the earliest railways in China, built before 1910 during the Qing dynasty. The first section is from Beijing to Tianjin, constructed as part of the Imperial Railways of Northern China between 1897 and 1900.

The second section is from Tianjin to Pukou – a suburb of Nanjing – and used to be called the Tianjin–Pukou railway.

The third section is from Nanjing to Shanghai, built between 1905 and 1908. This section is called Shanghai–Nanjing railway. During 1927–1949, however, when China's capital was Nanjing, this section alone was called the "Jinghu" railway.

Between Pukou and Xiaguan, the railway crosses the Yangtze River. Before the completion of the Nanjing Yangtze River Bridge in 1968, the trains were ferried across car-by-car. Passengers could also disembark at Nanjing North (Pukou), take a passenger ferry, and take a train again at the then Nanjing main station south of the river (now known as Nanjing West).

After the Nanjing Yangtze River Bridge was completed in 1968, these three sections were linked together and renamed as a single Beijing–Shanghai or Jinghu railway.

In May 2007, electrification of the section between Fuliji railway station and Linchang railway station was completed.[1]

Current status

[edit]

The railway line is the principal line between Beijing and Shanghai and along with the Beijing–Shanghai high-speed railway, it serves as one of the busiest rail corridors in China. It has dual tracks between Beijing and Shanghai, and the full length of the railway has been electrified. The entire line is dual tracked. Passenger rail service now offers overnight service on CRH Sleepers (D-series trains).

D type express overnight sleeper bullet trains have now commenced operation between Beijing and Nanjing/Shanghai/Hangzhou.. There are currently 6 overnight D bullet trains. Overnight Bullet trains take between 9 hours and 23 minutes to 9 hours, 36 minutes between Beijing and Nanjing and were Soft sleeper only but now changed to sleeper first-class and sleeper second-class, which provide better facilities than Soft and Hard sleepers on conventional trains respectively. Some trains also have second-class seat cars.

On June 30, 2011, the Beijing–Shanghai high-speed railway opened and runs roughly parallel to the Beijing–Shanghai railway. The opening of the high-speed railway relieved the Beijing–Shanghai railway from overcrowding, and it's increasingly shifted to freight traffic. As of 2017, two regular trains per day (not including aforementioned overnight sleepers) go the full way from Beijing to Shanghai on the old line, although hundreds of trains still use selected sections of it.

See also

[edit]

References

[edit]
  1. ^ "京沪铁路电气化改造符离集至林场段完工" [The electrification of the Beijing-Shanghai railway between Fuliji and Linchang is complete]. China News (in Chinese). 2006-05-17. Archived from the original on 2019-04-27. Retrieved 2021-06-09.