Beale number
 | This article relies largely or entirely on a single source. (June 2024) |
In mechanical engineering, the Beale number is a parameter that characterizes the performance of Stirling engines.[1] It is often used to estimate the power output of a Stirling engine design. For engines operating with a high temperature differential, typical values for the Beale number are in the range 0.11−0.15; where a larger number indicates higher performance.
Definition
[edit]The Beale number can be defined in terms of a Stirling engine's operating parameters:
where:
- Bn is the Beale number
- Wo is the power output of the engine (watts)
- P is the mean average gas pressure (Pa) or (MPa, if volume is in cm3)
- V is swept volume of the power piston (m3, or cm3, if pressure is in MPa)
- F is the engine cycle frequency (Hz)
Estimating Stirling power
[edit]To estimate the power output of an engine, nominal values are assumed for the Beale number, pressure, swept volume and frequency, then the power is calculated as the product of these parameters, as follows:
See also
[edit]References
[edit]- ^ American Society of Mechanical Engineers, New York (1981). "Intersociety Energy Conversion Engineering Conference". 16th, Atlanta, GA, August 9-14, 1981. 2. (A82-11701 02-44): 1886, 1887.
External links
[edit] | This thermodynamics-related article is a stub. You can help Wikipedia by expanding it. |
 | This article about a mechanical engineering topic is a stub. You can help Wikipedia by expanding it. |