Jump to content

aptX

From Wikipedia, the free encyclopedia
(Redirected from AptX Adaptive)
aptX
Internet media typeaudio/aptx
Developed byQualcomm[1][2]
Type of formatAudio codec

aptX (apt stands for audio processing technology[3]) is a family of proprietary audio codec compression algorithms owned by Qualcomm, with a heavy emphasis on wireless audio applications.

History

[edit]

The original compression algorithm was developed in the 1980s by Dr. Stephen Smyth as part of his Ph.D. research at Queen's University Belfast School of Electronics, Electrical Engineering and Computer Science[4] its design is based on time domain ADPCM principles without psychoacoustic auditory masking techniques.

The algorithm was then commercialized under the name aptX and first introduced to the commercial market as a semiconductor product, a custom programmed DSP integrated circuit with part name APTX100ED, which was initially adopted by broadcast automation equipment manufacturers who required a means to store CD-quality audio on a computer hard disk drive for automatic playout during a radio show, for example, hence replacing the task of the disc jockey.

The company was bought by Solid State Logic ca. 1988, and became part of Carlton Communications plc.[5] in 1989. In the early 1990s, APT's codecs were used to transfer audio via ISDN lines[6][7] by companies such as Disney to check dubbing done in Europe. On 23 December 1999,[8] Solid State Logic was sold by Carlton Communications to 3i.[9][10] Then in 2005, Solid State Logic sold APT in a management buyout.[4][3] On 1 March 2005 APT Licensing Ltd. was incorporated in Belfast (until 18 December 2008 named Audio Processing Technology Holdings Limited).[11]

The range of aptX algorithms for real-time audio data compression expanded with intellectual property becoming available in the form of software, firmware and programmable hardware for professional audio, television and radio broadcast, and consumer electronics, especially applications in wireless audio, low latency wireless audio for gaming and video, and audio over IP.[12] In addition, the aptX codec was introduced as an alternative to SBC, the sub-band coding scheme for lossy stereo/mono audio streaming mandated by the Bluetooth SIG for the Advanced Audio Distribution Profile (A2DP) of Bluetooth, the short-range wireless personal area network standard. aptX is supported in high-performance Bluetooth peripherals.[13][14]

Today, standard aptX and Enhanced aptX (E-aptX) are used in both ISDN and IP audio codec hardware from numerous broadcast equipment makers. An addition to the aptX family in the form of aptX Live, offering up to 8:1 compression, was introduced in 2007;[15] and aptX HD, a lossy, but scalable, adaptive, "near-lossless" quality audio codec was announced in April 2009.[16]

The company split in 2009; the broadcast hardware business was acquired by Audemat and became part of what is now WorldCast Systems, and the licensing business became APT Licensing and was acquired by CSR plc in 2010.[17] aptX was previously styled apt-X until acquired by CSR in 2010. CSR was subsequently acquired by Qualcomm in August 2015.[18]

Variants

[edit]
aptX variants[19]
SBC aptX aptX LL aptX HD aptX Adaptive Audio CD
(for reference) @ 279 kbit/s @ 420 kbit/s @ up to ~1.2 mbit/s (for reference)
misc. Launch ? < 2009[20] 2012[21] 2016[20] 2018[20] 2021[22] 1980s
Trademark – Qualcomm
(until August 2015: CSR, until July 2010: APT Licensing Ltd., until March 2005: Solid State Logic)		 –
Related patents EP 0400755B1 [23] (expired) EP 0398973B1 [24] (revoked) aptX,
US 9398620B1 [25] (expired)		 aptX ? –
Free implementations FFmpeg, libsbc FFmpeg, libopenaptx FFmpeg, libopenaptx FFmpeg, libopenaptx N/A –
Proprietary implementations Multiple Qualcomm libaptX[26] None Qualcomm libaptXHD[26] ? –
Chip – CSR8635 CSR8670 CSR8675 QCC5100 –
Audio
Encoding 		Word depth ? 16-bit 16-bit 16-bit
24-bit		 24-bit 16-bit 16-bit
Sampling rate 44.1 kHz
48 kHz
 		 44.1 kHz
48 kHz
 		 44.1 kHz
48 kHz
 		 44.1 kHz
48 kHz
 		 44.1 kHz
48 kHz
96 kHz 		44.1 kHz 44.1 kHz

 
Bit rate 345 kbit/s (@ 48 kHz) 352 kbit/s (@ 44.1 kHz)
384 kbit/s (@ 48 kHz)		 352 kbit/s (@ 48 kHz) 576 kbit/s (24 bits @ 48 kHz) 279 kbit/s 420 kbit/s ~140 kbit/s to 1.2 mbit/s (content dependent)[27][22] 1411 kbit/s (@ 44.1 kHz)
Constant Constant Constant Constant Variable Variable Constant
Codec latency ? 1.8 – 2.0 ms ? 1.8 – 2.0 ms 1.4 – 2.0 ms ? –
Hardware transmitter latency ? ? ≈ 40 ms[28]
(using dedicated antenna)		 ? ≈ 80 ms[29] ? –
Software transmitter latency (most phones) 200 – 500 ms[30]
depending on the transmitting device		 –
Backwards compatible with – SBC[citation needed] SBC, aptX SBC, aptX SBC, aptX, aptX HD ? ?
Sound
quality 		THD+N @ 1 kHz −67 dB[31] or −85 dB?[19] −85 dB -80 dB[32] or −90 dB?[19] −90 dB −100 dB −96 dB −96 dB
Multi-tone @ 1 kHz −100 dB ? −100 dB −90 dB −100 dB ?
Multi-tone @ 10 kHz −65 dB ? −90 dB −85 dB −95 dB ?
Crosstalk −120 dB ? −155 dB −90 dB −200 dB ?
SNR @ 1 kHz 93 dB 93 dB 129 dB 130 dB 135 dB −96 dB −96 dB
PEAQ ODG −0.18[31] or −0.08?[19] ? 0.05[32] or 0.04?[19] −0.06 0.045 ?
Frequency response over BT 20 Hz – 22.7 kHz 20 Hz – 22.7 kHz 20 Hz – 22.7 kHz 20 Hz – 22.7 kHz 20 Hz – 22 kHz 20 Hz – 22 kHz

aptX

[edit]

The aptX audio codec is used for consumer and automotive wireless audio applications, notably the real-time streaming of lossy stereo audio over the Bluetooth A2DP connection/pairing between a "source" device (such as a smartphone, tablet or laptop) and a "sink" accessory (e.g. a Bluetooth stereo speaker, headset or headphones). The technology must be incorporated in both transmitter and receiver to derive the sonic benefits of aptX audio coding over the default sub-band coding (SBC) mandated by the Bluetooth standard. Products bearing the CSR aptX logo are certified for interoperability with each other.[33]

Enhanced aptX

[edit]

Enhanced aptX provides coding at 4:1 compression ratios for professional audio broadcast applications and is suitable for AM, FM, DAB, HD Radio and 5.1. Enhanced aptX can handle up to 4 stereo pairs of AES3 audio and compress to 1 AES3 stream for transmit. Enhanced aptX supports bit-depths of 16, 20 or 24 bit. For audio sampled at 48 kHz, the bit-rate for E-aptX is 384 kbit/s (dual channel), 768 kbit/s (quad channel), 1024 kbit/s (5.1-channel), and 1280 kbit/s (5.1 channels plus stereo). Its lowest bit-rate is 60(?) kbit/s for mono audio sampled at 16 kHz, offering about 7.5 kHz frequency response just below that of wideband telephony codecs (which usually operate at 16 kHz sampling rate).[34]

aptX Live

[edit]

aptX Live is a low-complexity audio codec that is specifically designed to maximise digital wireless microphone channel density in bandwidth-constrained scenarios, such as live performance (a.k.a. Programme Making and Special Events), where the spectrum-efficiency of radio-based devices (wireless microphones, in-ear monitoring, talk-back systems) is becoming a prime operational consideration. aptX Live offers up to 8:1 compression of 24-bit resolution digital audio streams while maintaining acoustic integrity (approx. 120 dB dynamic range) and ensuring latency of around 1.8 ms at 48 kHz sampling rates. In addition, aptX Live also features techniques that aid connection in situations where the bit error rate (BER) is excessively high.

aptX LL

[edit]

aptX LL or aptX Low Latency is intended for video and gaming applications requiring comfortable audio-video synchronization whenever the stereo audio is transmitted over short-range radio to the listener(s) using the Bluetooth A2DP audio profile standard. The technology offers an end-to-end latency of 32 ms over Bluetooth. By comparison, the latency of standard Bluetooth stereo varies greatly depending on the system implementation and buffering. Solutions are available that use standard SBC encoding/decoding that achieve end-to-end latency of less than 40 ms. The recommended latency for audio-to-video synchronization in broadcast television is within +40 ms and −60 ms (audio before/after video, respectively).[35] However, AptX Low Latency requires a dedicated, wireless antenna, so it did not achieve much adoption in smartphones and was retired by Qualcomm in favor of aptX Adaptive.[36][37] Its main competitor is the LLAC.

aptX HD

[edit]

aptX HD or aptX High Definition has bit-rate of 576 kbit/s. It supports high-definition audio up to 48 kHz sampling rates and sample resolutions up to 24 bits. Unlike the name suggests, the codec is still considered lossy;[38] however, it permits a "hybrid" coding scheme for applications where average or peak compressed data rates must be capped at a constrained level. This involves the dynamic application of "near lossless" coding for those sections of audio where completely lossless coding is impossible due to bandwidth constraints. "Near lossless" coding maintains a high-definition audio quality, retaining audio frequencies up to 20 kHz and a dynamic range of at least 120 dB. Its main competitors are LDAC codec developed by Sony and LHDC.

Another scalable parameter within aptX HD is coding latency. It can be dynamically traded against other parameters such as levels of compression and computational complexity. The latency of the aptX HD codec can be scaled to as low as 1 ms for 48 kHz sampled audio, depending on the settings of other configurable parameters. aptX HD performs particularly well against other lossless codecs when the coding latency is constrained to be small, such as 5 ms or less, making it particularly appropriate for delay-sensitive interactive audio applications.

Many lossless codecs possess the benefit of a low computational overhead compared to well-known lossy codecs, such as MP3 and AAC. This is particularly important for deeply embedded audio applications running on low-power mobile devices. aptX HD promotes low computational overhead by dynamically selecting the simplest coding functions for each short segment of audio whilst complying with other operational constraints, such as levels of compression and coding delay. Depending on the settings of other scalable parameters, aptX HD can encode a 48 kHz 16-bit stereo audio stream using only 10 MIPS on a modern RISC processor with signal processing extensions. The corresponding decoder represents only 6 MIPS on the same platform.

User metadata and special synchronization data can be incorporated into the compressed format at configurable rates. The latter permits rapid decoder resynchronization in the event of data corruption or loss over communications links where quality of service (QoS) can vary rapidly. Depending on the settings of parameters, decoder resynchronization can occur within 1–2 ms.[39][40]

aptX Adaptive

[edit]

aptX Adaptive is a next-generation dynamically adjustable audio codec intended for premium audio quality and low-latency. aptX Adaptive's bitrate scales dynamically between 279 kbit/s and 420 kbit/s. It also works with a shared, rather than dedicated, wireless antenna.[36] Qualcomm claims their new compression algorithm provides a compression ratio between 5:1 to 10:1. This allows aptX Adaptive at 279 kbit/s and 420 kbit/s to produce the same sound quality as aptX at 352 kbit/s and aptX HD at 576 kbit/s. aptX Adaptive supports 16 and 24 bit-depths at 44.1, 48, and 96 kHz sample rates. Actual 96 kHz support, however, is depending on actual product hardware implementation. For example, B&O H95 only support 48 kHz at max even with AptX Adaptive support. Hardware aptX Adaptive has end-to-end latency of 80 ms,[29] but most phones are using a software transmitter - which does not have any latency advantages over other codecs.[41] aptX Adaptive is also backward compatible with older aptX and aptX HD codecs, but not with aptX LL.[36][42][43][44]

aptX Voice

[edit]

aptX Voice is a new feature of aptX Adaptive, and is designed to significantly improve the quality of voice for those using Bluetooth accessories to make voice calls. It does this by delivering 32 kHz voice call quality within the Bluetooth Hands-Free Profile.[45]

aptX Lossless

[edit]

In 2021, Qualcomm announced aptX Lossless, described as a new capability of the aptX Adaptive codec aimed to deliver CD-quality, 16-bit, 44.1kHz lossless audio over Bluetooth. aptX Lossless utilizes Qualcomm Bluetooth High Speed Link technology to scale up to about 1.2 mbit/s in favorable RF environments.[22]

Mode of operation

[edit]

The example CD-quality 16-bit 44 kHz (up to 22 kHz signal bandwidth) stream is divided by two layers of 64-tap QMF (Quadrature mirror filter) into four 16-bit subbands of 11 kHz (up to 5.5 kHz signal bandwidth each). The first 64-tap QMF divides into two bands (0–11 kHz and 11–22 kHz bands), and then each one is fed into another 64-tap QMF dividing into four bands: 0–5.5 kHz, 5.5–11 kHz, 11–16.5 kHz and 16.5–22 kHz. Reduced variance is generally expected to be found in higher bands compared to lower bands, thus ADPCM is employed to allocate bits optimally.

Each band is coded with ADPCM using bit allocation of 8 bits for band 1 (0-5.5 kHz spectrum), 4 bits for band 2 (5.5–11 kHz), 2 bits each for bands 3 and 4 (11-16.5 kHz and 16.5–22 kHz). A future modification is considered with adaptive bit reallocation based on variance analysis of each subband, for example 9, 2, 3, 2 etc.

As a result, for mono channel, 16 bits @ 44.1 kHz=705.6 kbit/s input is converted into (4×16) 64 bits@11.025 kHz=705.6 kbit/s and then to (8+4+2+2) 16 bits @ 11.025 kHz=176.4 kbit/s.

Optionally (adds a small delay) a short-term RMSE analyzer is used to reduce dynamic range, and thus allocate bits more effectively during quiet passages (i.e. lossy format).

For a stereo signal, a standard PCM 1.4-Mbit stream is converted into 352 Kbit/sec aptX stream.

Details can be found in the EP0398973B1[46] patent. The main reasoning is that signal variation is reduced at higher frequencies, which makes it amenable to coding with codecs like ADPCM.

See also

[edit]

References

[edit]
  1. ^ "aptX Bluetooth Music Audio Codec". CSR plc. Archived from the original on 2016-07-25. Retrieved 2016-07-23.
  2. ^ "About aptX". Retrieved 2016-07-23.
  3. ^ a b "Solid State Logic Sells APT (Audio Processing Technology)". mixonline.com. May 12, 2005.
  4. ^ a b "Adventure ends for local management team who took on big boys". irishtimes.com. 2010-08-03. Retrieved 2019-09-30.
  5. ^ "Company profile and background information on Carlton Communications PLC". Archived from the original on 2019-09-28. Retrieved 2021-11-25.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
  6. ^ "History of aptX". aptx.com. Archived from the original on September 28, 2019. Retrieved September 28, 2019.
  7. ^ "About APT-X". Archived from the original on September 28, 2019. Retrieved September 28, 2019. The author is a member of the Audio Engineering Society (aes.org)
  8. ^ "BA cuts stake in Equant". TheGuardian.com. December 23, 1999. Archived from the original on September 28, 2019. Retrieved September 28, 2019.
  9. ^ "Carlton sells Solid State arm". variety.com. Archived from the original on September 28, 2019.
  10. ^ "Carlton Communications". Grace's Guide.
  11. ^ APT Licensing Limited on Companies House
  12. ^ "Programme, Thursday 12th February". Audio Engineering Society. 2009-02-12. Retrieved 2016-07-23.
  13. ^ Alexis Santos (2012-12-04). "Soundmatters unveils foxLv2 aptX Bluetooth speaker with $199 price tag". Engadget. Retrieved 2016-07-23.
  14. ^ Chris Burns (2012-05-04). "Galaxy S III just the latest with apt-X Bluetooth audio". slashgear.com. Retrieved 2016-07-23.
  15. ^ "APT to Introduce apt-X Live at NAB 2007". mixonline.com. 2007-03-26. Retrieved 2016-07-23.
  16. ^ "APTX elevates HD digital audio with apt-X Lossless". 2009-04-20. Archived from the original on 2012-05-08. Retrieved 2016-07-23.
  17. ^ "apt-X Coding Developer Acquired by CSR". Radio World. 2010-07-28. Archived from the original on 2016-06-03. Retrieved 2016-07-24.
  18. ^ "Qualcomm Completes $2.4 Billion Acquisition of CSR". Qualcomm. 2015-08-13. Archived from the original on 2016-10-17. Retrieved 2016-07-24.[dead link‍]
  19. ^ a b c d e aptX Adaptive product brief with comparison table (linked pdf)
  20. ^ a b c History of aptX: Sennheiser launched the first ever Bluetooth headset with aptX.
  21. ^ Rayson BTM-770G: One of the first products with Qualcomm Chip CSR8670 and aptX LL
  22. ^ a b c "Qualcomm adds Bluetooth Lossless Audio Technology to Snapdragon Sound | Qualcomm". www.qualcomm.com. Retrieved 2024-06-26.
  23. ^ J.B. Rault, Y.F. Dehery, J.Y. Roudaut, A.A.M. Bruekers, R.N.J. Veldhuis, "Digital transmission system using subband coding of a digital signal", Publication number: EP 0400755B1 
  24. ^ S.M.F. Smyth, "Method and apparatus for electrical signal coding", Publication number: EP 0398973B1 
  25. ^ J.J. Lazzeroni, M.K. Carevich, J.D. Vertz, P.E.H. Hauser, S.J. Kingston, "Simultaneous voice and audio traffic between two devices on a wireless personal-area network", Publication number: US 9398620B1 
  26. ^ a b Integration of the aptX and aptX-HD codecs for A2DP source, Android Open Source Project, January 4, 2017
  27. ^ Becky Roberts (2022-11-17). "aptX Lossless: what is the breakthrough Bluetooth codec? How can you get it?". whathifi. Retrieved 2024-06-26.
  28. ^ "Qualcomm aptX Low Latency Synchronised Audio". Retrieved 6 April 2021.
  29. ^ a b "Qualcomm aptX Adaptive Audio Codec Technology". Retrieved 6 April 2021.
  30. ^ "Android's Bluetooth latency needs a serious overhaul". SoundGuys. March 6, 2021.
  31. ^ a b "Qualcomm® aptX™ Audio | Wireless Audio Technology & Products". www.aptx.com.
  32. ^ a b "Qualcomm® aptX™ HD | High Resolution Audio Technology". www.aptx.com.
  33. ^ "Qualcomm aptX Audio". www.aptx.com. Retrieved 2019-09-22.
  34. ^ "aptX Enhanced". CSR plc. Retrieved 2016-07-24.
  35. ^ "Qualcomm aptX Low Latency Synchronised Audio". www.aptx.com. Retrieved 2019-09-22.
  36. ^ a b c "aptX Adaptive: The new king of Bluetooth?". SoundGuys. 2018-11-30. Retrieved 2019-09-22.
  37. ^ "RTL Live Stream". Retrieved 22 June 2023.
  38. ^ "aptX HD - lossless or lossy?". AVHub. 2016-11-22. Retrieved 2018-01-13.
  39. ^ "Qualcomm aptX HD Audio". www.aptx.com. Retrieved 2019-09-22.
  40. ^ "AptX HD - what is it and why should I care?". Android Authority. 2017-08-30. Retrieved 2019-09-22.
  41. ^ "aptX Adaptive shocked us! Vivo TWS Neo "review"!". YouTube. 2020-09-10. Archived from the original on 2021-12-15. Retrieved 2021-04-06.
  42. ^ "Qualcomm aptX Adaptive Audio Codec Technology". www.aptx.com. Retrieved 2019-09-22.
  43. ^ "Qualcomm's New aptX Adaptive Designed to Bring Dynamic Next-Gen Premium Wireless Audio Experiences for Gaming, Video and Music". Qualcomm. 2018-08-29. Retrieved 2019-09-22.
  44. ^ "AptX Adaptive Bluetooth codec compresses audio at variable bitrate". xda-developers. 2018-08-31. Retrieved 2019-09-22.
  45. ^ "Qualcomm Introduces aptX Voice Audio Technology for Higher Quality Voice Calls". qualcomm. 2020-01-06. Retrieved 2020-03-27.
  46. ^ "EP0398973B1: Method and apparatus for electrical signal coding". Retrieved 2019-01-07.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=AptX&oldid=1256080431#aptX_Adaptive"