Jump to content

Ammonoidea

From Wikipedia, the free encyclopedia
(Redirected from Ammonitic suture)

Ammonoids
Temporal range: 409–65 Ma Devonian - Danian
Specimen of Pleuroceras solare, from the Lower Jurassic of Bavaria, Germany
Scientific classification Edit this classification
Domain: Eukaryota
Kingdom: Animalia
Phylum: Mollusca
Class: Cephalopoda
Clade: Neocephalopoda
Subclass: Ammonoidea
Zittel, 1884
Orders

Ammonoids are extinct spiral shelled cephalopods comprising the subclass Ammonoidea. They are more closely related to living coleoids (i.e., octopuses, squid and cuttlefish) than they are to shelled nautiloids (such as the living Nautilus).[1] The earliest ammonoids appeared during the Devonian, with the last species vanishing during or soon after the Cretaceous–Paleogene extinction event. They are often called ammonites, which is most frequently used for members of the order Ammonitida, the only remaining group of ammonoids from the Jurassic up until their extinction.[2]

Ammonites are excellent index fossils, and linking the rock layer in which a particular species or genus is found to specific geologic time periods is often possible. Their fossil shells usually take the form of planispirals, although some helically spiraled and nonspiraled forms (known as heteromorphs) have been found.

The name "ammonite", from which the scientific term is derived, was inspired by the spiral shape of their fossilized shells, which somewhat resemble tightly coiled rams' horns. Pliny the Elder (d. 79 AD near Pompeii) called fossils of these animals ammonis cornua ("horns of Ammon") because the Egyptian god Ammon (Amun) was typically depicted wearing rams' horns.[3] Often, the name of an ammonite genus ends in -ceras, which is from κέρας (kéras) meaning "horn".

Diagnostic characters

[edit]

Ammonites (subclass Ammonoidea) can be distinguished by their septa, the dividing walls that separate the chambers in the phragmocone, by the nature of their sutures where the septa join the outer shell wall, and in general by their siphuncles.

Septa and suture patterns

[edit]

Ammonoid septa characteristically have bulges and indentations and are to varying degrees convex when seen from the front, distinguishing them from nautiloid septa, which are typically simple concave, dish-shaped structures. The topology of the septa, especially around the rim, results in the various suture patterns found.[4] The septal curvature in nautiloids and ammonoids also differ in that the septa curves towards the opening in nautiloids, and away from the opening in ammоnoids.[5]

Regions of the suture line and variants in suture patterns
Ammonite clean cut

While nearly all nautiloids show gently curving sutures, the ammonoid suture line (the intersection of the septum with the outer shell) is variably folded, forming saddles ("peaks" that point towards the aperture) and lobes ("valleys" which point away from the aperture). The suture line has four main regions.

Placenticeras sp. showing sutures.

The external or ventral region refers to sutures along the lower (outer) edge of the shell, where the left and right suture lines meet. The external (or ventral) saddle, when present, lies directly on the lower midline of the shell. As a result, it is often called the median saddle. On suture diagrams the median saddle is supplied with an arrow which points towards the aperture. The median saddle is edged by fairly small external (or ventral) lobes. The earliest ammonoids lacked a median saddle and instead had a single midline ventral lobe, which in later forms is split into two or more components.

The lateral region involves the first saddle and lobe pair past the external region as the suture line extends up the side of the shell. The lateral saddle and lobe are usually larger than the ventral saddle and lobe. Additional lobes developing towards the inner edge of a whorl are labelled umbilical lobes, which increase in number through ammonoid evolution as well as an individual ammonoid's development. In many cases the distinction between the lateral and umbilical regions are unclear; new umbilical features can develop from subdivisions of other umbilical features, or from subdivisions of lateral features. Lobes and saddles which are so far towards the center of the whorl that they are covered up by succeeding whorls are labelled internal (or dorsal) lobes and saddles.

Three major types of suture patterns are found in the Ammonoidea:

  • Goniatitic – numerous undivided lobes and saddles. This pattern is characteristic of the Paleozoic ammonoids (orders Agoniatitida, Clymeniida, Goniatitida, and Prolecanitida).
  • Ceratitic – lobes have subdivided tips, giving them a saw-toothed appearance. The saddles are rounded and undivided. This suture pattern is characteristic of Triassic ammonoids in the order Ceratitida. It appears again in the Cretaceous "pseudoceratites".
  • Ammonitic – lobes and saddles are much subdivided (fluted); subdivisions are usually rounded instead of saw-toothed. Ammonoids of this type are the most important species from a biostratigraphical point of view. This suture type is characteristic of Jurassic and Cretaceous ammonoids, but extends back all the way to the Permian.


Siphuncle

[edit]

The siphuncle in most ammonoids is a narrow tubular structure that runs along the shell's outer rim, known as the venter, connecting the chambers of the phragmocone to the body or living chamber. This distinguishes them from living nautiloides (Nautilus and Allonautilus) and typical Nautilida, in which the siphuncle runs through the center of each chamber.[6] However the very earliest nautiloids from the Late Cambrian and Ordovician typically had ventral siphuncles like ammonites, although often proportionally larger and more internally structured.[7] The word "siphuncle" comes from the Neo-Latin siphunculus, meaning "little siphon".[8]

Classification

[edit]
An ammonite shell viewed in section, revealing the internal chambers and septa. Large polished examples are prized for both their aesthetic and scientific value.

Originating from within the bactritoid nautiloids, the ammonoid cephalopods first appeared in the Devonian (circa 409 million years ago (Mya)) and became extinct shortly after Cretaceous (66 Mya). The classification of ammonoids is based in part on the ornamentation and structure of the septa comprising their shells' gas chambers.

Orders and suborders

[edit]
An ammonitic ammonoid with the body chamber missing, showing the septal surface (especially at right) with its undulating lobes and saddles.
Iridescent ancient ammonite fossil on display at the American Museum of Natural History, New York City, around 2 feet in diameter

The Ammonoidea can be divided into six orders, listed here starting with the most primitive and going to the more derived:

In some classifications, these are left as suborders, included in only three orders: Goniatitida, Ceratitida and Ammonitida.

Taxonomy of the Treatise on Invertebrate Paleontology

[edit]

The Treatise on Invertebrate Paleontology (Part L, 1957) divides the Ammonoidea, regarded simply as an order, into eight suborders, the Anarcestina, Clymeniina, Goniatitina and Prolecanitina from the Paleozoic; the Ceratitina from the Triassic; and the Ammonitina, Lytoceratina and Phylloceratina from the Jurassic and Cretaceous. In subsequent taxonomies, these are sometimes regarded as orders within the subclass Ammonoidea.

Life

[edit]
Asteroceras, a Jurassic ammonite from England

Because ammonites and their close relatives are extinct, little is known about their way of life. Their soft body parts are very rarely preserved in any detail. Nonetheless, much has been worked out by examining ammonoid shells and by using models of these shells in water tanks.

Many ammonoids probably lived in the open water of ancient seas, rather than at the sea bottom, because their fossils are often found in rocks laid down under conditions where no bottom-dwelling life is found. In general, they appear to have inhabited the upper 250 meters of the water column.[9] Many of them (such as Oxynoticeras) are thought to have been good swimmers, with flattened, discus-shaped, streamlined shells, although some ammonoids were less effective swimmers and were likely to have been slow-swimming bottom-dwellers. Synchrotron analysis of an aptychophoran ammonite revealed remains of isopod and mollusc larvae in its buccal cavity, indicating at least this kind of ammonite fed on plankton.[10] They may have avoided predation by squirting ink, much like modern cephalopods; ink is occasionally preserved in fossil specimens.[11]

The soft body of the creature occupied the largest segments of the shell at the end of the coil. The smaller earlier segments were walled off and the animal could maintain its buoyancy by filling them with gas. Thus, the smaller sections of the coil would have floated above the larger sections.[12]

Many ammonite shells have been found with round holes once interpreted as a result of limpets attaching themselves to the shells. However, the triangular formation of the holes, their size and shape, and their presence on both sides of the shells, corresponding to the upper and lower jaws, is more likely evidence of the bite of a medium-sized mosasaur preying upon ammonites.

Some ammonites appear to have lived in cold seeps and even reproduced there.[13]

Shell anatomy and diversity

[edit]
Fossil shell of ammonite Placenticeras whitfieldi showing punctures caused by the bite of a mosasaur, Peabody Museum of Natural History, Yale
Orthosphynctes, a Jurassic ammonite from Portugal

Basic shell anatomy

[edit]
Jeletzkytes, a Cretaceous ammonite from South Dakota, US
A variety of ammonite forms, from Ernst Haeckel's 1904 Kunstformen der Natur (Art Forms of Nature)
Polished fossil ammonite

The chambered part of the ammonite shell is called a phragmocone. It contains a series of progressively larger chambers, called camerae (sing. camera) that are divided by thin walls called septa (sing. septum). Only the last and largest chamber, the body chamber, was occupied by the living animal at any given moment. As it grew, it added newer and larger chambers to the open end of the coil. Where the outer whorl of an ammonite shell largely covers the preceding whorls, the specimen is said to be involute (e.g., Anahoplites). Where it does not cover those preceding, the specimen is said to be evolute (e.g., Dactylioceras).

A thin living tube called a siphuncle passed through the septa, extending from the ammonite's body into the empty shell chambers. Through a hyperosmotic active transport process, the ammonite emptied water out of these shell chambers. This enabled it to control the buoyancy of the shell and thereby rise or descend in the water column.

A primary difference between ammonites and nautiloids is the siphuncle of ammonites (excepting Clymeniina) runs along the ventral periphery of the septa and camerae (i.e., the inner surface of the outer axis of the shell), while the siphuncle of nautiloids runs more or less through the center of the septa and camerae.

Sexual dimorphism

[edit]
Discoscaphites iris, Owl Creek Formation (Upper Cretaceous), Ripley, Mississippi, US

One feature found in shells of the modern Nautilus is the variation in the shape and size of the shell according to the sex of the animal, the shell of the male being slightly smaller and wider than that of the female. This sexual dimorphism is thought to be an explanation for the variation in size of certain ammonite shells of the same species, the larger shell (the macroconch) being female, and the smaller shell (the microconch) being male. This is thought to be because the female required a larger body size for egg production. A good example of this sexual variation is found in Bifericeras from the early part of the Jurassic period of Europe.

Only recently has sexual variation in the shells of ammonites been recognized. The macroconch and microconch of one species were often previously mistaken for two closely related but different species occurring in the same rocks. However, because the dimorphic sizes are so consistently found together, they are more likely an example of sexual dimorphism within the same species.

Whorl width in the body chamber of many groups of ammonites, as expressed by the width:diameter ratio, is another sign of dimorphism. This character has been used to separate "male" (Largiventer conch "L") from "female" (Leviventer conch "l").[14]

Variations in shape

[edit]

The majority of ammonite species feature planispiral shells, tightly coiled in a flat plane. The most fundamental difference in spiral form is how strongly successive whorls expand and overlap their predecessors. This can be inferred by the size of the umbilicus, the sunken-in inner part of the coil, exposing older and smaller whorls. Evolute shells have very little overlap, a large umbilicus, and many exposed whorls. Involute shells have strong overlap, a small umbilicus, and only the largest and most recent whorls are exposed. Shell structure can be broken down further by the width of the shell, with implications for hydrodynamic efficiency.

Major shell forms include:

  • Oxycone – Strongly involute and very narrow, with sharp ventral keels and a streamlined, lenticular (lens-shaped) cross-section. These ammonoids are estimated to be nektonic (well-adapted to rapid active swimming), as their shell form incurs very little drag and allows for efficient, stable coasting even in turbulent flow regimes.[15]
  • Serpenticone – Strongly evolute and fairly narrow (discoidal) in width. Historically assumed to be primarily planktonic (free-floating drifters),[16] a nektonic lifestyle is also plausible for many species.[17] Thanks to their flattened shape, these ammonoids accelerate effectively, though their large umbilicus introduces more drag in successive thrusts.[15] Relative to oxycones, serpenticones take less effort to rotate around the transverse axis (pitch).[18] Serpenticone ammonites resemble coiled snakes and are abundant in the Jurassic rocks of Europe. Carved serpenticones fulfill the role of the "snakestones" in medieval folklore.
  • Spherocone – Moderately involute and quite broad, globular (nearly spherical) in overall shape. Their semi-spherical shape is the most efficient for moving in laminar water (with a low Reynolds number) or migrating vertically through the water column. Though less hydrodynamically stable than other forms, this may be advantageous in certain situations, as spherocones can easily rotate around both the transverse axis[18] and the vertical axis (yaw).[15]
  • Platycone – Intermediate between serpenticones and oxycones: narrow and moderately involute.
  • Discocone – Intermediate between oxycones and spherocones: involute and moderately broad. The modern Nautilus is an example of a discocone cephalopod.
  • Planorbicone – Intermediate between serpenticones and spherocones: Moderately broad, evolute to involute. Wider and more involute ammonoids on the serpenticone-spherocone spectrum are termed Cadicones.

Ammonites vary greatly in the ornamentation (surface relief) of their shells. Some may be smooth and relatively featureless, except for growth lines, resembling that of the modern Nautilus. In others, various patterns of spiral ridges, ribs, nodes, or spines are presented. This type of complex ornamentation of the shell is especially evident in the later ammonites of the Cretaceous.

Heteromorphs

[edit]
Baculites ammonite from the Late Cretaceous of Wyoming, US: The original aragonite of the outer conch and inner septa has dissolved away, leaving this articulated internal mold.
Heteromorph ammonite Didymoceras stevensoni

Ammonoids with a shell shape diverging from the typical planispiral form are known as heteromorphs, instead forming a conch with detached whorls (open coiling) or non-planispiral coiling. These types of shells evolved four times in ammonoids, with the first forms appearing already in the Devonian period.[19] In late Norian age in Triassic the first heteromorph ammonoid fossils belongs to the genus Rhabdoceras. The three other heteromorphic genera were Hannaoceras, Cochloceras and Choristoceras. All of them went extinct at the end of Triassic.[20] In the Jurassic an uncoiled shell was found in the Spiroceratoidea,[21] but by the end of Cretaceous the only heteromorph ammonites remaining belonged to the suborder Ancyloceratina.[22] One example is Baculites, which has a nearly straight shell convergent with the older orthocone nautiloids. Still other species' shells are coiled helically (in two dimensions), similar in appearance to some gastropods (e.g., Turrilites and Bostrychoceras). Some species' shells are even initially uncoiled, then partially coiled, and finally straight at maturity (as in Australiceras).

Perhaps the most extreme and bizarre-looking example of a heteromorph is Nipponites, which appears to be a tangle of irregular whorls lacking any obvious symmetric coiling. Upon closer inspection, though, the shell proves to be a three-dimensional network of connected "U" shapes. Nipponites occurs in rocks of the upper part of the Cretaceous in Japan and the United States.

Aptychus

[edit]
A drawing of an aptychus which was mistakenly described as a bivalve and given the name "Trigonellites latus", from the Kimmeridge Clay Formation in England

Some ammonites have been found in association with a single horny plate or a pair of calcitic plates. In the past, these plates were assumed to serve in closing the opening of the shell in much the same way as an operculum, but more recently they are postulated to have been a jaw apparatus.[23][24][25][26]

The plates are collectively termed the aptychus or aptychi in the case of a pair of plates, and anaptychus in the case of a single plate. The paired aptychi were symmetric to one another and equal in size and appearance.

Anaptychi are relatively rare as fossils. They are found representing ammonites from the Devonian period through those of the Cretaceous period.

Calcified aptychi only occur in ammonites from the Mesozoic era. They are almost always found detached from the shell, and are only very rarely preserved in place. Still, sufficient numbers have been found closing the apertures of fossil ammonite shells as to leave no doubt as to their identity as part of the anatomy of an ammonite.

Large numbers of detached aptychi occur in certain beds of rock (such as those from the Mesozoic in the Alps). These rocks are usually accumulated at great depths. The modern Nautilus lacks any calcitic plate for closing its shell, and only one extinct nautiloid genus is known to have borne anything similar. Nautilus does, however, have a leathery head shield (the hood) which it uses to cover the opening when it retreats inside.

There are many forms of aptychus, varying in shape and the sculpture of the inner and outer surfaces, but because they are so rarely found in position within the shell of the ammonite it is often unclear to which species of ammonite one kind of aptychus belongs. A number of aptychi have been given their own genus and even species names independent of their unknown owners' genus and species, pending future discovery of verified occurrences within ammonite shells.

Soft-part anatomy

[edit]

Although ammonites do occur in exceptional lagerstatten such as the Solnhofen Limestone, their soft-part record is surprisingly sparse. Beyond a tentative ink sac and possible digestive organs, no soft parts were known until 2021.[27][28] When neutron imaging was used on a fossil found in 1998, part of the musculature became visible and showed they were able to retract themselves into the shell for protection, and that the retractor muscles and hyponome that work together to enable jet propulsion in nautilus worked independently in ammonites.[29][30] The reproductive organs show possible traces of spermatophores, which would support the hypothesis that the microconchs were males.[31] They likely bore a radula and beak, a marginal siphuncle and ten arms.[32] They operated by direct development with sexual reproduction, were carnivorous, and had a crop for food storage. They are unlikely to have dwelt in fresh or brackish water.[32] Many ammonites were likely filter feeders, so adaptations associated with this lifestyle like sieves probably occurred.[10]

A 2021 study found ammonite specimens with preserved hook-like suckers, providing a general shape to ammonite tentacles.[33] A contemporary study found an ammonite isolated body, offering for the first time a glimpse into these animals' organs.[28]

Size

[edit]
2-metre (6.6 ft) Parapuzosia seppenradensis cast in Germany

The smallest ammonoid was Maximites from the Upper Carboniferous. Adult specimens reached only 10 mm (0.39 in) in shell diameter.[34] Few of the ammonites occurring in the lower and middle part of the Jurassic period reached a size exceeding 23 cm (9.1 in) in diameter. Much larger forms are found in the later rocks of the upper part of the Jurassic and the lower part of the Cretaceous, such as Titanites from the Portland Stone of Jurassic of southern England, which is often 53 cm (1.74 ft) in diameter, and Parapuzosia seppenradensis of the Cretaceous period of Germany, which is one of the largest-known ammonites, sometimes reaching 2 m (6.6 ft) in diameter. The largest-documented North American ammonite is Parapuzosia bradyi from the Cretaceous, with specimens measuring 137 cm (4.5 ft) in diameter.

Distribution

[edit]
An ammonoid from Iran

Starting from the mid-Devonian, ammonoids were extremely abundant, especially as ammonites during the Mesozoic era. Many genera evolved and ran their course quickly, becoming extinct in a few million years. Due to their rapid evolution and widespread distribution, ammonoids are used by geologists and paleontologists for biostratigraphy. They are excellent index fossils, and it is often possible to link the rock layer in which they are found to specific geologic time periods.

Due to their free-swimming and/or free-floating habits, ammonites often happened to live directly above seafloor waters so poor in oxygen as to prevent the establishment of animal life on the seafloor. When upon death the ammonites fell to this seafloor and were gradually buried in accumulating sediment, bacterial decomposition of these corpses often tipped the delicate balance of local redox conditions sufficiently to lower the local solubility of minerals dissolved in the seawater, notably phosphates and carbonates. The resulting spontaneous concentric precipitation of minerals around a fossil, a concretion, is responsible for the outstanding preservation of many ammonite fossils.

When ammonites are found in clays, their original mother-of-pearl coating is often preserved. This type of preservation is found in ammonites such as Hoplites from the Cretaceous Gault clay of Folkestone in Kent, England.

An iridescent ammonite from Madagascar

The Cretaceous Pierre Shale formation of the United States and Canada is well known for the abundant ammonite fauna it yields, including Baculites, Placenticeras, Scaphites, Hoploscaphites and Jeletzkytes, as well as many uncoiled forms. Many of these also have much or all of the original shell, as well as the complete body chamber, still intact. Many Pierre Shale ammonites, and indeed many ammonites throughout earth history, are found inside concretions.

Other fossils, such as many found in Madagascar and Alberta, Canada display iridescence. These iridescent ammonites are often of gem quality (ammolite) when polished. In no case would this iridescence have been visible during the animal's life; additional shell layers covered it.

The majority of ammonoid specimens, especially those of the Paleozoic era, are preserved only as internal molds; the outer shell (composed of aragonite)[35] has been lost during the fossilization process. Only in these internal-mould specimens can the suture lines be observed; in life, the sutures would have been hidden by the outer shell.

The ammonoids as a group continued through several major extinction events, although often only a few species survived. Each time, however, this handful of species diversified into a multitude of forms. Ammonite fossils became less abundant during the latter part of the Mesozoic, and although they seemingly survived the Cretaceous–Paleogene extinction event, all known Paleocene ammonite lineages are restricted to the Paleocene epoch (65–61 Ma).[36][37]

Evolutionary history

[edit]

Goniatites, which were a dominant component of Early and Middle Permian faunas, became rare in the Late Permian, and no goniatite is thought to have crossed into the Triassic.[38]

Ceratitida originated during the Middle Permian, likely from the Daraelitidae, and radiated in the Late Permian. In the aftermath of the Permian–Triassic extinction event, Ceratitids represent the dominant group of Triassic ammonites.[38]

Ammonites were devastated by the end-Triassic extinction, with only a handful of genera belonging to the family Psiloceratidae of the suborder Phylloceratina surviving and becoming ancestral to all later Jurassic and Cretaceous ammonites. Ammonites explosively diversified during the Early Jurassic, with the orders Psiloceratina, Ammonitina, Lytoceratina, Haploceratina, Perisphinctina and Ancyloceratina all appearing during the Jurassic.[39]

Heteromorph ammonites (ammonites with open or non-spiral coiling) of the order Ancyloceratina became common during the Cretaceous period.[40]

Ammonites in the permanent collection of The Children's Museum of Indianapolis

At least 57 species of ammonites, which were widespread and belonged to six superfamilies, were extant during the last 500,000 years of the Cretaceous, indicating that ammonites remained highly diverse until the very end of their existence. All ammonites were wiped out during or shortly after the K-Pg extinction event, caused by the Chicxulub impact. It has been suggested that ocean acidification generated by the impact played a key role in their extinction, as the larvae of ammonites were likely small and planktonic, and would have been heavily affected.[36] Nautiloids, exemplified by modern nautiluses, are conversely thought to have had a reproductive strategy in which eggs were laid in smaller batches many times during the lifespan, and on the sea floor well away from any direct effects of such a bolide strike, and thus survived.[41] Many ammonite species were filter feeders, so they might have been particularly susceptible to marine faunal turnovers and climatic change.[10] Some reports suggest that a few ammonite species may have persisted into the very early Danian stage of the Paleocene, before going extinct.[42][43]

Cultural significance

[edit]

In medieval Europe, fossilised ammonites were thought to be petrified coiled snakes, and were called "snakestones" or, more commonly in medieval England, "serpentstones". They were considered to be evidence for the actions of saints, such as Hilda of Whitby, a myth referenced in Sir Walter Scott's Marmion,[44] and Saint Patrick, and were held to have healing or oracular powers. Traders would occasionally carve the head of a snake onto the empty, wide end of the ammonite fossil, and then sell them as petrified snakes. In other cases, the snake's head would be simply painted on.[45][46]

Others believed ammonites, which they referred to as "salagrana" were composed of fossilized worm dung, and could be used to ward off witches.[47]

Ammonites from the Gandaki River in Nepal are known as Shaligrams, and are believed by Hindus to be a concrete manifestation of Vishnu.[48]

See also

[edit]

References

[edit]
  1. ^ Klug, Christian; Kröger, Björn; Vinther, Jakob; Fuchs, Dirk (August 2015). "Ancestry, Origin and Early Evolution of Ammonoids". In Christian Klug; Dieter Korn; Kenneth De Baets; Isabelle Kruta; Royal H. Mapes (eds.). Ammonoid Paleobiology: From macroevolution to paleogeography. Topics in Geobiology 44. Vol. 44. Springer. pp. 3–24. doi:10.1007/978-94-017-9633-0_1. ISBN 978-94-017-9632-3.
  2. ^ "What is an ammonite?". www.nhm.ac.uk. Retrieved 2023-12-21.
  3. ^ NH 37.40.167
  4. ^ "The Cephalopoda". ucmp.berkeley.edu. Archived from the original on March 24, 2022. Retrieved September 24, 2019.
  5. ^ Phylum Mollusca Class Cephalopoda
  6. ^ Lemanis, Robert; Korn, Dieter; Zachow, Stefan; Rybacki, Erik; Hoffmann, René (2016-03-10). "The Evolution and Development of Cephalopod Chambers and Their Shape". PLOS ONE. 11 (3): e0151404. Bibcode:2016PLoSO..1151404L. doi:10.1371/journal.pone.0151404. ISSN 1932-6203. PMC 4786199. PMID 26963712.
  7. ^ Kröger, Björn (2003). "The size of the siphuncle in cephalopod evolution". Senckenbergiana Lethaea. 83 (1–2): 39–52. doi:10.1007/BF03043304. ISSN 0037-2110.
  8. ^ "siphuncle, n.", Oxford English Dictionary (3 ed.), Oxford University Press, 2023-03-02, doi:10.1093/oed/6104320866, retrieved 2024-06-07
  9. ^ Lemanis, R. (2020). "The ammonite septum is not an adaptation to deep water: Re-evaluating a centuries-old idea". Proceedings of the Royal Society B: Biological Sciences. 287 (1936). doi:10.1098/rspb.2020.1919. PMC 7657852. PMID 33049174.
  10. ^ a b c Kruta, Isabelle; Landman, Neil; Rouget, Isabelle; Cecca, Fabrizio; Tafforeau, Paul (Jan 2011). "The Role of Ammonites in the Mesozoic Marine Food Web Revealed by Jaw Preservation". Science. 331 (6013): 70–72. Bibcode:2011Sci...331...70K. doi:10.1126/science.1198793. PMID 21212354. S2CID 206530342.
  11. ^ Doguzhaeva, Larisa A.; Royal H. Mapes; Herbert Summesberger; Harry Mutvei (2007). "The Preservation of Body Tissues, Shell, and Mandibles in the Ceratitid Ammonoid Austrotrachyceras (Late Triassic), Austria". In N. H. Landman; et al. (eds.). Cephalopods Present and Past: New Insights and Fresh Perspectives. Dordrecht: Springer. pp. 221–238. doi:10.1007/978-1-4020-6806-5_11. ISBN 978-1-4020-6806-5.
  12. ^ "Introduction to Ammonoidea". The Geology of Portsdown Hill. Archived from the original on 2 May 2007. Retrieved 2007-04-26.
  13. ^ Rowe, Alison J.; Landman, Neil H.; Cochran, J. Kirk; Witts, James D.; Garb, Matthew P. (26 March 2020). "Late Cretaceous Methane Seeps as Habitats for Newly Hatched Ammonites". PALAIOS. 35 (3): 151–163. Bibcode:2020Palai..35..151R. doi:10.2110/palo.2019.105. S2CID 214718487.
  14. ^ Sarti, Carlo (1999). "Whorl Width in the Body Chamber of Ammonites as a Sign of Dimorphism". Advancing Research on Living and Fossil Cephalopods. pp. 315–332. doi:10.1007/978-1-4615-4837-9_23. ISBN 978-1-4613-7193-9.
  15. ^ a b c Peterman, David J.; Ritterbush, Kathleen A. (2022-07-04). "Resurrecting extinct cephalopods with biomimetic robots to explore hydrodynamic stability, maneuverability, and physical constraints on life habits". Scientific Reports. 12 (1): 11287. Bibcode:2022NatSR..1211287P. doi:10.1038/s41598-022-13006-6. ISSN 2045-2322. PMC 9253093. PMID 35787639.
  16. ^ Westermann, Gerd E. G. (1996), Landman, Neil H.; Tanabe, Kazushige; Davis, Richard Arnold (eds.), "Ammonoid Life and Habitat", Ammonoid Paleobiology, Topics in Geobiology, vol. 13, Boston, MA: Springer US, pp. 607–707, doi:10.1007/978-1-4757-9153-2_16, ISBN 978-1-4757-9153-2, retrieved 2023-05-15
  17. ^ Ritterbush, K. A.; Hoffmann, R.; Lukeneder, A.; De Baets, K. (2014). "Pelagic palaeoecology: the importance of recent constraints on ammonoid palaeobiology and life history". Journal of Zoology. 292 (4): 229–241. doi:10.1111/jzo.12118. ISSN 0952-8369.
  18. ^ a b Peterman, David J; Ritterbush, Kathleen A (2022-12-12). "Stability–Maneuverability Tradeoffs Provided Diverse Functional Opportunities to Shelled Cephalopods". Integrative Organismal Biology. 4 (1): obac048. doi:10.1093/iob/obac048. ISSN 2517-4843. PMC 9743176. PMID 36518181.
  19. ^ Hoffmann, René; Slattery, Joshua S.; Kruta, Isabelle; Linzmeier, Benjamin J.; Lemanis, Robert E.; Mironenko, Aleksandr; Goolaerts, Stijn; De Baets, Kenneth; Peterman, David J.; Klug, Christian (2021). "Recent advances in heteromorph ammonoid palaeobiology". Biological Reviews. 96 (2): 576–610. doi:10.1111/brv.12669. PMID 33438316.
  20. ^ Tanner, Lawrence H. (16 November 2017). The Late Triassic World: Earth in a Time of Transition. Springer. ISBN 978-3-319-68009-5.
  21. ^ Gradstein, Felix M.; Ogg, James G.; Schmitz, Mark D.; Ogg, Gabi M. (2020). Geologic Time Scale 2020. Elsevier. ISBN 978-0-12-824361-9.
  22. ^ Landman, Neil H.; Machalski, Marcin; Whalen, Christopher D. (2021). "The concept of 'heteromorph ammonoids'". Lethaia. 54 (5): 595–602. Bibcode:2021Letha..54..595L. doi:10.1111/let.12443.
  23. ^ Morton, N (1981). "Aptychi: the myth of the ammonite operculum". Lethaia. 14 (1): 57–61. Bibcode:1981Letha..14...57M. doi:10.1111/j.1502-3931.1981.tb01074.x.
  24. ^ Morton, N.; Nixon, M. (1987). "Size and function of ammonite aptychi in comparison with buccal masses of modem cephalopods". Lethaia. 20 (3): 231–238. Bibcode:1987Letha..20..231M. doi:10.1111/j.1502-3931.1987.tb02043.x.
  25. ^ Lehmann, U.; Kulicki, C. (1990). "Double function of aptychi (Ammonoidea) as jaw elements and opercula". Lethaia. 23 (4): 325–331. Bibcode:1990Letha..23..325L. doi:10.1111/j.1502-3931.1990.tb01365.x.
  26. ^ Seilacher, A (1993). "Ammonite aptychi; how to transform a jaw into an operculum?". American Journal of Science. 293: 20–32. Bibcode:1993AmJS..293...20S. doi:10.2475/ajs.293.A.20.
  27. ^ Wippich, M. G. E.; Lehmann, J. (2004). "Allocrioceras from the Cenomanian (mid-Cretaceous) of the Lebanon and its bearing on the palaeobiological interpretation of heteromorphic ammonites". Palaeontology. 47 (5): 1093–1107. Bibcode:2004Palgy..47.1093W. doi:10.1111/j.0031-0239.2004.00408.x.
  28. ^ a b Klug, Christian; Schweigert, Günter; Tischlinger, Helmut; Pochmann, Helmut (December 2021). "Failed prey or peculiar necrolysis? Isolated ammonite soft body from the Late Jurassic of Eichstätt (Germany) with complete digestive tract and male reproductive organs". Swiss Journal of Palaeontology. 140 (1): 3. Bibcode:2021SwJP..140....3K. doi:10.1186/s13358-020-00215-7. PMC 7813712. PMID 33505352.
  29. ^ "Neutron imaging reveals never-before-seen 3D muscle structure in rare Jurassic ammonite fossil". Science and Technology Facilities Council.
  30. ^ Begum, Tammana (7 December 2021). "Exceptionally preserved ammonite shows its inner soft tissue in 3D". Natural History Museum.
  31. ^ Klug, Christian; Schweigert, Günter; Tischlinger, Helmut; Pochmann, Helmut (2021). "Failed prey or peculiar necrolysis? Isolated ammonite soft body from the Late Jurassic of Eichstätt (Germany) with complete digestive tract and male reproductive organs". Swiss Journal of Palaeontology. 140 (1): 3. Bibcode:2021SwJP..140....3K. doi:10.1186/s13358-020-00215-7. PMC 7813712. PMID 33505352.
  32. ^ a b Landman, Neil H; Tanabe, Kazushige; Davis, Richard Arnold (1996). Ammonoid paleobiology. Springer. ISBN 978-0-306-45222-2.
  33. ^ Smith, C. P. A.; Landman, N. H.; Bardin, J.; Kruta, I. (4 June 2021). "New evidence from exceptionally "well-preserved" specimens sheds light on the structure of the ammonite brachial crown". Scientific Reports. 11 (1): 11862. Bibcode:2021NatSR..1111862S. doi:10.1038/s41598-021-89998-4. PMC 8178333. PMID 34088905.
  34. ^ Nishiguchi, M.K.; R. Mapes (2008). "Cephalopoda" (PDF). University of California Press. pp. 163–199. Archived (PDF) from the original on 2022-09-23. Retrieved 2022-09-23.
  35. ^ Buchardt, B.; Weiner, S. (1981). "Diagenesis of aragonite from Upper Cretaceous ammonites: a geochemical case-study". Sedimentology. 28 (3): 423–438. Bibcode:1981Sedim..28..423B. doi:10.1111/j.1365-3091.1981.tb01691.x.
  36. ^ a b Landman, Neil H.; Goolaerts, Stijn; Jagt, John W.M.; Jagt-Yazykova, Elena A.; Machalski, Marcin (2015), Klug, Christian; Korn, Dieter; De Baets, Kenneth; Kruta, Isabelle (eds.), "Ammonites on the Brink of Extinction: Diversity, Abundance, and Ecology of the Order Ammonoidea at the Cretaceous/Paleogene (K/Pg) Boundary", Ammonoid Paleobiology: From macroevolution to paleogeography, Topics in Geobiology, vol. 44, Dordrecht: Springer Netherlands, pp. 497–553, doi:10.1007/978-94-017-9633-0_19, ISBN 978-94-017-9632-3, archived from the original on 2023-03-16, retrieved 2021-10-26
  37. ^ Machalski, Marcin; Heinberg, Claus (2005-12-01). "Evidence for ammonite survival into the Danian (Paleogene) from the Cerithium Limestone at Stevns Klint, Denmark". Bulletin of the Geological Society of Denmark. 52: 2005–12. doi:10.37570/bgsd-2005-52-08.
  38. ^ a b McGowan, Alistair J.; Smith, Andrew B. (May 2007). "Ammonoids Across the Permian/Triassic Boundary: A Cladistic Perspective". Palaeontology. 50 (3): 573–590. Bibcode:2007Palgy..50..573M. doi:10.1111/j.1475-4983.2007.00653.x.
  39. ^ Page, Kevin N. (January 2008). "The evolution and geography of Jurassic ammonoids". Proceedings of the Geologists' Association. 119 (1): 35–57. Bibcode:2008PrGA..119...35P. doi:10.1016/S0016-7878(08)80257-X.
  40. ^ Hoffmann, René; Slattery, Joshua S.; Kruta, Isabelle; Linzmeier, Benjamin J.; Lemanis, Robert E.; Mironenko, Aleksandr; Goolaerts, Stijn; De Baets, Kenneth; Peterman, David J.; Klug, Christian (April 2021). "Recent advances in heteromorph ammonoid palaeobiology". Biological Reviews. 96 (2): 576–610. doi:10.1111/brv.12669. PMID 33438316. S2CID 231593832.
  41. ^ Ward, Peter (1996). "Ammonoid Extinction". Ammonoid Paleobiology. Topics in Geobiology. Vol. 13. Springer. pp. 815–823. doi:10.1007/978-1-4757-9153-2_20. ISBN 978-1-4757-9155-6.
  42. ^ Machalski, Marcin; Heinberg, Claus (2005-12-31). "Evidence for ammonite survival into the Danian (Paleogene) from the Cerithium Limestone at Stevns Klint, Denmark". Bulletin of the Geological Society of Denmark. 52: 97–111. doi:10.37570/bgsd-2005-52-08. ISSN 2245-7070. Archived from the original on 2021-11-27. Retrieved 2023-01-08.
  43. ^ Landman, Neil H.; Garb, Matthew P.; Rovelli, Remy; Ebel, Denton S.; Edwards, Lucy E. (2012). "Short-Term Survival of Ammonites in New Jersey After the End-Cretaceous Bolide Impact". Acta Palaeontologica Polonica. 57 (4): 703–715. doi:10.4202/app.2011.0068. ISSN 0567-7920. Archived from the original on 2023-01-07. Retrieved 2023-01-08.
  44. ^ Lovett, Edward (September 1905). "The Whitby Snake-Ammonite Myth". Folk-Lore. 16 (3): 333–4. doi:10.1080/0015587x.1905.9719966.
  45. ^ Cadbury, D. (2000). The Dinosaur Hunters. Fourth Estate. p. 7. ISBN 1-85702-963-1.
  46. ^ Folklore. Vol. 16. 1905. p. 333.
  47. ^ Leland, Charles Godfrey (1892). Etruscan Roman Remains in Popular Tradition. T. F. Unwin.
  48. ^ "Fossils: myths, mystery, and magic". The Independent. 2007-02-12. Archived from the original on 2007-11-11. Retrieved 2010-04-23.

Further reading

[edit]
[edit]