Jump to content

Aluminium ethoxide

From Wikipedia, the free encyclopedia
(Redirected from Aluminium triethoxide)
Aluminium ethoxide
Names
Other names
Aluminium ethoxide
Triethoxyaluminum
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.008.279 Edit this at Wikidata
UNII
  • InChI=1S/3C2H5O.Al/c3*1-2-3;/h3*2H2,1H3;/q3*-1;+3
    Key: JPUHCPXFQIXLMW-UHFFFAOYSA-N
  • InChI=1/3C2H5O.Al/c3*1-2-3;/h3*2H2,1H3;/q3*-1;+3/rC6H15AlO3/c1-4-8-7(9-5-2)10-6-3/h4-6H2,1-3H3
    Key: JPUHCPXFQIXLMW-MHHMYNCNAZ
  • CCO[Al](OCC)OCC
Properties
Al(OCH2CH3)3
Molar mass 162.165 g·mol−1
Appearance White powder
Density 1.142 g/cm3
Melting point 140 °C (284 °F; 413 K)
Boiling point 320 °C (608 °F; 593 K)
reacts violently
Solubility slightly soluble in xylene, chlorobenzene
Hazards
GHS labelling:
GHS02: FlammableGHS05: Corrosive[1]
Danger[1]
H228, H314[1]
P210, P280, P305+P351+P338, P310[1]
Flash point 210 °C (410 °F; 483 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Aluminium triethoxide (also aluminium ethoxide) is an metallo-organic compound with the empirical formula Al(OCH2CH3)3. It is a moisture-sensitive white powder.[2]

Properties

[edit]
Structure of aluminium isopropoxide indicates the tendency of aluminium alkoxides to form aggregates.

Aluminium triethoxide is slightly soluble in hot dimethyl benzene, chlorobenzene and other high boiling point non-polar solvents.[3] It hydrolyzes to aluminium hydroxide and ethanol:

Al(OEt)3 + 3 H2O → Al(OH)3 + 3 EtOH

Although the structure of aluminium triethoxide has not been established by X-ray crystallography, the related aluminium isopropoxide has a tetrameric structure as verified by NMR spectroscopy and X-ray crystallography. The species is described by the formula Al[(μ-O-i-Pr)2Al(O-i-Pr)2]3.[4][5] The unique central Al is octahedral, and three other Al centers adopt tetrahedral geometry. A

Applications

[edit]

Aluminium triethoxide is used as a reducing agent for aldehydes and ketones, and is also used as a polymerization catalyst. Aluminium triethoxide is mainly used in Sol-Gel Process preparation of high purity aluminium sesquioxide, which is a polymerization agent. At the same time, it is used as a reducing reagent, for example, carbonyl compounds that restore to alcohol.[clarification needed]

Synthesis

[edit]

Aluminium triethoxide is produced by treating aluminium with anhydrous alcohol. The aluminium is often activated with iodine or by amalgamation to accelerate the reaction.[6][2]

Aluminium triethoxide has been evaluated as a catalyst for the synthesis of esters and carbonates.[7]

References

[edit]
  1. ^ a b c d "Aluminum Ethoxide". American Elements. Retrieved 2019-07-15.
  2. ^ a b H. J. Becher (1963). "Aluminum Ethoxide". In G. Brauer (ed.). Handbook of Preparative Inorganic Chemistry, 2nd Ed. Vol. 1. NY, NY: Academic Press. p. 834.
  3. ^ "Aluminium ethoxide". The Merck Index. Royal Society of Chemistry.
  4. ^ Folting, K.; Streib, W. E.; Caulton, K. G.; Poncelet, O.; Hubert-Pfalzgraf, L. G. (1991). "Characterization of aluminum isopropoxide and aluminosiloxanes". Polyhedron. 10 (14): 1639–46. doi:10.1016/S0277-5387(00)83775-4.
  5. ^ Turova, N. Y.; Kozunov, V. A.; Yanovskii, A. I.; Bokii, N. G.; Struchkov, Yu T.; Tarnopolskii, B. L. (1979). "Physico-chemical and structural investigation of aluminium isopropoxide." J. Inorg. Nucl. Chem. 41(1): 5-11, doi:10.1016/0022-1902(79)80384-X.
  6. ^ Wilhoit, R. C.; Burton, J. R.; Kuo, Fu-tien; Huang, Sui-Rong; Viquesnel, A. (1 December 1962). "Properties of aluminium ethoxide". Journal of Inorganic and Nuclear Chemistry. 24 (7): 851–861. doi:10.1016/0022-1902(62)80106-7. ISSN 0022-1902.
  7. ^ North, Michael; Young, Carl (2 November 2011). "Reducing the Cost of Production of Bimetallic Aluminium Catalysts for the Synthesis of Cyclic Carbonates". ChemSusChem. 4 (11): 1685–1693. Bibcode:2011ChSCh...4.1685N. doi:10.1002/cssc.201100239. PMID 22045591.