Jump to content

A.T. Mine E.P. Mark II

From Wikipedia, the free encyclopedia
(Redirected from A.T. Mine E. P. Mark II)
A.T. Mine E.P. Mark II
TypeAnti-tank mine
Place of originUK
Service history
Used byUK
WarsWorld War II
Specifications
Height4 in (100 mm)
Diameter10 in (250 mm)

FillingTNT
Filling weight4.5 lb (2.0 kg)

The Anti-Tank Mine Egyptian Pattern Mark II was a British anti-tank mine used in World War II, produced near Cairo for use in extensive minefields in the North African campaign.[1][2][3]

Design

[edit]

The mine is circular with a diameter of 10 inches (250 mm), and a height of 4 inches (100 mm).[1] It has a mushroom shaped cover, indicating it to be in active use,[1][4] which is held to the mine by four hooked straps consequently attached to a wire on the mine's bottom, keeping the cover in place.[4] The mine has its fuse well in the center.[4]

The side of the mine houses a channel close to the bottom, which permits access to the mine's center fuse.[4] A small metal tab can be used to close off the channel, making the mine safe. For example, it is used for transporting and/or storage.[4]

The mine is detonated when the pressure of a vehicle on the top of the mine forces the plunger inside the mine. It is forced downward through a shear pin. The pin goes onto an ampoule cartridge.[4][1] With its downward momentum, the plunger crushes the cartridge. It initiates a chemical reaction that activates the mine.[4][1]

Arming, disarming, and disposal

[edit]

Arming this mine involves sealing an ampoule cartridge into the detonator. The steel rod that occupies the hole during transport is then replaced with the detonator. The last step is to bend the metal tab over the detonator assembly and place the mine.[4]

Disarming the mine is only possible if the detonator assembly can be removed without excessive force.[4]

Typically, the mine is safely destroyed instead of being disarmed.[4]

Service

[edit]

With Egyptian origin, the mine saw extensive service by United Kingdom, a Commonwealth of defensive positions, realized during the North African campaign.[5]

References

[edit]
  1. ^ a b c d e "British Mines of the Second World War". www.wwiiequipment.com. Retrieved 2021-01-02.
  2. ^ "OP 1665 - British Ordnance; Part6 - Land Mines and Fuzes; Chapter 2 - Anti-Tank Mines and Fuzes: A./T. Mine E.P. Mk II (Obsolete)". michaelhiske.de. Retrieved 2021-01-03.
  3. ^ "Reference of Egyptian pattern mines in a written document by a minelayer published by the BBC". Archived from the original on 2019-06-07.
  4. ^ a b c d e f g h i j "A/Tk Mine EP Mk2". www.lexpev.nl. Retrieved 2021-02-01.
  5. ^ Said, Mohamed Kadry (2003), Brauch, Hans Günter; Liotta, Peter H.; Marquina, Antonio; Rogers, Paul F. (eds.), "Landmines from External Powers in World War II at El-Alamein in Egypt", Security and Environment in the Mediterranean: Conceptualizing Security and Environmental Conflicts, Hexagon Series on Human and Environmental Security and Peace, Berlin, Heidelberg: Springer, pp. 513–522, doi:10.1007/978-3-642-55854-2_32, ISBN 978-3-642-55854-2, retrieved 2021-01-03