Jump to content

EL84

From Wikipedia, the free encyclopedia
(Redirected from 6P14P)
EL84
Common variants of the EL84, manufactured in Russia, Slovakia, and China
ClassificationThermionic Pentode
ServiceAudio
Socket connections
B9A (Noval)

The EL84 is a vacuum tube of the power pentode type. It is used in the power-output stages of audio amplifiers, most commonly now in guitar amplifiers, but originally in radios. The EL84 is smaller and more sensitive than the octal 6V6 that was widely used around the world until the 1960s. An interchangeable North American type is the 6BQ5 (the RETMA tube designation name for the EL84).

The EL84 was developed to eliminate the need for a driver tube in radios, so it has rather more gain than is usual in a power pentode. Eliminating a preamplifier triode in radios made them cheaper. Manufacturers were quick to adopt it in general use, and they are found in many old European tube-radios and other audio equipment. A single EL84 was used in low-cost equipment, and a push–pull pair for lower distortion and higher power.

In common with all 'E' prefix tubes, using the Mullard–Philips tube designation, it has a heater voltage of 6.3V. It can produce 17W output in Class AB1 in push–pull configuration. Many guitar-amplifiers routinely run EL84 tubes in excess of 400VDC, with the Traynor Guitarmate reportedly putting out 25W RMS with 2 EL84s in a push–pull configuration and a B+ between 400–420 VDC.

Developed by Philips in 1953, and used in the British Mullard 5-10 amplifier circuit, the EL84 came to prominence when used in Watkins (and later the Vox) amplifiers preferred by many British Invasion bands of the 1960s.[citation needed]

N709, 6BQ5/EL84/6P15, and other exact equivalents

[edit]

The 1959 Miniwatt Technical Data book from Philips lists the 6BQ5 as the R.E.T.M.A. (American) name for the EL84 in its "Type Number Cross Reference",[1] and hence an exact substitute. American and Japanese manufacturers might label their versions of the EL84 as EL84/6BQ5 or 6BQ5/EL84[2] or simply "6BQ5". Other manufacturers followed with their versions, such as the N709 from General Electric Co. Ltd. of England and the 6P15 from UK brand Mazda, that were designed to be drop-in substitutes. CV2975 is the military designation (Common Tube) for EL84.[3]

Other equivalent tubes are the 7189 and 7189A,[4][5] an extended-ratings version of the tube for industrial applications, the E84L (7320), a long-life, professional version with more than 10000 hours expected lifetime, and the directly equivalent 6P14P (Cyrillic: 6П14П) produced in the USSR by the Reflektor plant. As of 2012 a slightly modified version of the 6P14P was manufactured in Russia for Sovtek. An extended-ratings version of the 6P14P is also available, the 6P14P-EV (Cyrillic: 6П14П-ЕВ), and it is known among US guitar players as EL84M or the Russian military EL84. While not necessarily a true military version of the tube (in fact it is more comparable to the 7189), 6P14P-EVs are known for their low noise and durability. Large new-old-stock supplies of the tube are available. The 6GK6 has nearly equivalent operating characteristics with a different pinout.

As of 2022 the tube was manufactured in Russia (Sovtek, Electro-Harmonix, Tung-Sol, Mullard and Genalex Gold Lion brands), Slovakia- Čadca (JJ Electronic) and China (Psvane brand[6] made by Hengyang Electronics[7]). The Sovtek EL84 is often sold under their own brand name by other well-known electric guitar and guitar amplifier manufacturers – such as Fender or Mesa Boogie.

Also see 6P1P.

Characteristics

[edit]

Specifications given for the EL84, PL84, and UL84 are from Philips; RCA and Sylvania list slightly higher voltage ratings for Va and Vkf and lower for Vg2 for the xCW5 series – the 6CW5/EL86, 8CW5/XL86, 10CW5/LL86, 15CW5/PL84, and 30CW5/HL84.[8][9]

Characteristic EL84/6BQ5, N709 8BQ5/XL84 10BQ5/LL84 EL86/6CW5 10CW5/LL86 PL84/15CW5 UL84/45B5
Basing Diagram 9CV (pin 1: ic; pin 2: g1; pin 3: k+g3; pin 4: h; pin 5: h; pin 6: ic; pin 7: anode; pin 8: ic; pin 9: g2) where ic = internal connection
Heater 6.3 V, 760 mA 8.0 V, 600 mA
or 8.5 V, 600 mA[10]
10.6 V, 450 mA (Sylvania)
10.5 V, 450 mA (RCA)
6.3 V, 760 mA 10.6 V, 450 mA 15 V, 300 mA 45 V, 100 mA
Maximum Voltage Ratings 300 Va
300 Vg2
100 Vkf
250 Va (Philips) or 275 Va (RCA, Sylvania)
250 Vg2 (Philips) or 220 Vg2 (RCA, Sylvania)
200 Vkf (Philips) or 220 Vkf (RCA, Sylvania)
250 Va
200 Vg2
200 Vkf
Maximum Power Ratings 12 Wa
1.75 Wg2 (Philips) or 2 Wg2 (RCA, Sylvania)
12 Wa (Philips) or 14 Wa (RCA)
1.75 Wg2 (Philips) or 2.1 Wg2 (RCA, Sylvania)
Maximum Cathode Current, Ik 65 mA 100 mA
Transconductance 11.3 mA/V 11.0 mA/V
Internal (plate) resistance, Ri 38 kΩ 26 kΩ
Test Conditions 250 Va
250 Vg2
Ia = 48 mA
Rk = 135 Ω
170 Va
170 Vg2
Ia = 70 mA
-12.5 Vg1
Maximum Output Power
(single-ended Class A)
5.7 W
@10% THD
into 5200 Ω, 250 V supply, 4.3 VRMS input
5.3 W
@10% THD
into 2500 Ω, 200 V supply, 7.0 VRMS input
Maximum Output Power
(2 tubes, push-pull Class AB)
17 W
@4% THD
into 4+4 kΩ, 300 V supply, 10 VRMS input
17.5 W
@5.4% THD
into 2+2 kΩ, 230 V supply, 14.6V RMS input
14.3 W
@3.8% THD
into 1.5 + 1.5 kΩ, 200 V supply, 14.3 VRMS input

References

[edit]
  1. ^ "Miniwatt" Technical Data (6th ed.). 20 Herbert Street, Artarmon, N.S.W., Australia: The "Miniwatt" Electronics Division of Philips Electrical Industries Pty. Limited. 1958. p. 158.{{cite book}}: CS1 maint: location (link)
  2. ^ Sylvania Receiving Tubes Technical Manual (14th ed.). reprinted by Audio Amateur Press. p. 124.
  3. ^ "A simple CV Register cross reference". Retrieved 23 May 2014.
  4. ^ "7189A". Retrieved 25 May 2014.
  5. ^ "7189 & 7189A Datasheets from Sylvania" (PDF). Retrieved 25 May 2014.
  6. ^ Classic Series EL84,"Changsha Hengyang Electronics Co., Ltd".
  7. ^ About us, "Changsha Hengyang Electronics Co., Ltd".
  8. ^ Philips Data Handbook – Electron Tubes Part 4. Philips. 1967.
  9. ^ "EL86 @ The National Valve Museum". Retrieved 22 May 2014.
  10. ^ "XL84". Retrieved 23 May 2014.
[edit]

See also

[edit]